|
03-25-2002, 10:56 AM
|
#1 |
|
Registered User
Join Date: Feb 2002
Location: Cedar City, Utah
Posts: 38
|
evaporation canister
I wanted to know how the charcoal evaporation canister is plumbed on the 1972 trucks. on the canister there is one inlet (gas tank for the evaporated fumes). then it has an outlet that says pcv valve and then one that says carburator(apparently they go somewhere indicated, but I need to know exactly> . I want to know where the hoses go. any help would be great thanks.
------------------
__________________
everybody just seems jealous!!! |
|
|
|
03-25-2002, 11:07 AM
|
#2 |
|
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
doesnt matter exactly which port on carb, just connect it to manifold port on the carb, they all do the same, the one for the pcv hose make a T into the hose at the carb almost
good luck ------------------ -71/C-10(thx teeitup and crews!)350 4+4/CH465(thx 71Chev, GMCPaul, and CPNE)longfleet bed(thnx meathead95)!still building it- -'84 Z28(Z28) 1G1AP87GXEL100000 with H.O. 305/4bbl/190net/hp(L69) 3.73 rear(GT4/YC4) 700R4(MD8-MXO) & other goodies  -79 G20 pass van, 350/th350/10bolt, paint is overrated Randy- Lincoln, IL r68c30@hotmail.com © RSS Enterprises 2000 |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
