New 66 owner - Disc Brake conversion?

[DOB1966]

Hey guys ... I am a new proud owner of my 66 chevy K20 3/4ton 4x4 and i'm ready to dig in. I hope to have pictures posted really soon. I'm completely stoked about becoming a part of this group. I'm inspired by all the knowledge that's shared. Anyway, I want to loose the drums on the front and possibly the rear end! any suggestions on what is best to do ... conversion or swap out? I do know that i don't want independant suspension ... Thanks in advance for all suggestions

[edge]

do a search function for "disc brakes" etc... there is plenty of info... put a picture up when you can. good luck.

[jason65]

Welcome and good luck with your build.

[DPowers]

Welcome to the board from East TN. If you go to the FAQ's section of 60-66 Trucks- there is a large amount of information to peruse. LILRED and CaptainFab as well as others are great resources.
Oh yeah- we want to see pictures.

[DOB1966]

Thanks guys, i'm new to the navigation of this site ... i will check out the faq's. When i do a search on disc brakes i come up with a lot of stuff for 2wd but nothing for 4x4 conversions.

[68SWB4x4]

If its an orignal front axle it should be a closed knuckle dana 44. You can use a dana 44 or 10 bolt from a 71-87 truck will bolt pretty much right in. You will also have to get new brake lines and the master cylinder from the same truck.

[msgross]

That's what I did on my 68...You will also need to modify the steering drag link or upgrade to the newer power steering gear box. Rear discs are a little pricy for 6 lugs with e-brake but systems are available...