TX FS: 67-72 Floor Shift Tilt Column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Huskerboy2 · 03-08-2010, 04:45 PM

I'd like to sell off this 67-72 floor shift tilt column. I've had it for years, intending to restore it. It's complete, but really needs a rebuild and restoration. It's got some surface rust, but should refinish nicely. $275 shipped in the continental U.S. Sorry, no paypal. Thanks.

**72K20** · 03-08-2010, 05:37 PM

Put me in line, PM sent.

msgross · 03-08-2010, 05:56 PM

in line as well

Huskerboy2 · 03-08-2010, 08:40 PM

72K20, I responded to your p.m.

Huskerboy2 · 03-08-2010, 08:43 PM

Just to be clear, I'm basically selling this as a core. It's not a drop in unit. If rebuilding a tilt column gives you the willies, like it does me, I would pass on it.

If you're that guy who can take a tilt column, buy $100 worth of parts, rebuild it and be into it for $375 or so, this is a good deal for you.

**72K20** · 03-09-2010, 11:03 AM

I'm out. I do sincerely appreciate you pointing out the condition and the skills needed to make this unit right. Although I feel like a reasonable shade tree mechanic, I'm not sure I could do this justice. Thanks anyway and I hope I haven't slowed down your sale too much.

Huskerboy2 · 03-27-2010, 11:25 PM

$250 shipped? Cheap price for a floor shift tilt. Again, I'd plan on rebuilding it. I just don't have the time.

HuggerCST · 03-28-2010, 12:09 AM

You're tempting me & I don't even have a use for it! That's the cheapest one that I've ever seen here, I'm surprised that it hasn't sold.

Huskerboy2 · 03-28-2010, 12:33 AM

I think there are quite a few guys on here who rebuild them. I thought it would easily be worth it, even as a core.

**Gary 70 Jimmy** · 03-28-2010, 07:14 AM

I will you do $200.00 shipped.

Huskerboy2 · 03-28-2010, 11:19 AM

Thanks for the offer, but I can't do that.

**southern parts** · 03-28-2010, 12:12 PM

any damage to the bowl or upper tin? how bad is the lower part of the column pitted ?

Huskerboy2 · 03-28-2010, 12:22 PM

I don't see any damage to it at all. It's got plenty of surface rust. I'm sure it sat exposed to the elements for some period of time. I would definitely figure it needs a rebuild. I'm not sure about the parts for this, but I would imagine it needs new bearings, a new turn signal switch, paint and shop time. For somebody who isn't intimidated by that, it's a good deal. For somebody who could rebuild this themselves, they would be into it for low to mid $300's when they're done. Even in todays parts market, that's pretty good.

**72K20** · 03-29-2010, 04:04 PM

Another PM sent, I'm back in!

mahanian · 03-30-2010, 05:59 PM

Put me in line!

Huskerboy2 · 03-30-2010, 09:36 PM

72K20, you're first up. I'm firm on $250 shipped. It's well worth that. I'm not heading to Dallas anytime soon, so no delivery possible. Let me know.

mahanian, if 72K20 passes, you're up.

Thanks all.

*67/72junkie* · 03-30-2010, 11:07 PM

$250 shipped is a very good price.If neither or these guys get it let me know.

mahanian · 04-03-2010, 12:45 PM

Payment sent!

Huskerboy2 · 04-05-2010, 10:23 PM

Sold to mahanian! Thanks.

03-08-2010, 04:45 PM	#1
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	FS: 67-72 Floor Shift Tilt Column I'd like to sell off this 67-72 floor shift tilt column. I've had it for years, intending to restore it. It's complete, but really needs a rebuild and restoration. It's got some surface rust, but should refinish nicely. $275 shipped in the continental U.S. Sorry, no paypal. Thanks. Attached Images __________________ '72 Chevy Blazer

03-08-2010, 05:37 PM	#2
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: FS: 67-72 Floor Shift Tilt Column Put me in line, PM sent.

03-08-2010, 05:56 PM	#3
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS: 67-72 Floor Shift Tilt Column in line as well __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

03-08-2010, 08:40 PM	#4
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: FS: 67-72 Floor Shift Tilt Column 72K20, I responded to your p.m. __________________ '72 Chevy Blazer

03-08-2010, 08:43 PM	#5
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: FS: 67-72 Floor Shift Tilt Column Just to be clear, I'm basically selling this as a core. It's not a drop in unit. If rebuilding a tilt column gives you the willies, like it does me, I would pass on it. If you're that guy who can take a tilt column, buy $100 worth of parts, rebuild it and be into it for $375 or so, this is a good deal for you. __________________ '72 Chevy Blazer

03-09-2010, 11:03 AM	#6
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: FS: 67-72 Floor Shift Tilt Column I'm out. I do sincerely appreciate you pointing out the condition and the skills needed to make this unit right. Although I feel like a reasonable shade tree mechanic, I'm not sure I could do this justice. Thanks anyway and I hope I haven't slowed down your sale too much.

03-27-2010, 11:25 PM	#7
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: FS: 67-72 Floor Shift Tilt Column $250 shipped? Cheap price for a floor shift tilt. Again, I'd plan on rebuilding it. I just don't have the time. __________________ '72 Chevy Blazer

03-28-2010, 12:09 AM	#8
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: FS: 67-72 Floor Shift Tilt Column You're tempting me & I don't even have a use for it! That's the cheapest one that I've ever seen here, I'm surprised that it hasn't sold. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

03-28-2010, 12:33 AM	#9
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: FS: 67-72 Floor Shift Tilt Column I think there are quite a few guys on here who rebuild them. I thought it would easily be worth it, even as a core. __________________ '72 Chevy Blazer

03-28-2010, 07:14 AM	#10
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: FS: 67-72 Floor Shift Tilt Column I will you do $200.00 shipped. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

03-28-2010, 11:19 AM	#11
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: FS: 67-72 Floor Shift Tilt Column Thanks for the offer, but I can't do that. __________________ '72 Chevy Blazer

03-28-2010, 12:12 PM	#12
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: FS: 67-72 Floor Shift Tilt Column any damage to the bowl or upper tin? how bad is the lower part of the column pitted ?

03-28-2010, 12:22 PM	#13
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: FS: 67-72 Floor Shift Tilt Column I don't see any damage to it at all. It's got plenty of surface rust. I'm sure it sat exposed to the elements for some period of time. I would definitely figure it needs a rebuild. I'm not sure about the parts for this, but I would imagine it needs new bearings, a new turn signal switch, paint and shop time. For somebody who isn't intimidated by that, it's a good deal. For somebody who could rebuild this themselves, they would be into it for low to mid $300's when they're done. Even in todays parts market, that's pretty good. __________________ '72 Chevy Blazer

03-29-2010, 04:04 PM	#14
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: FS: 67-72 Floor Shift Tilt Column Another PM sent, I'm back in!

03-30-2010, 05:59 PM	#15
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: FS: 67-72 Floor Shift Tilt Column Put me in line!



Register or Log In To remove these advertisements.

03-30-2010, 09:36 PM	#16
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: FS: 67-72 Floor Shift Tilt Column 72K20, you're first up. I'm firm on $250 shipped. It's well worth that. I'm not heading to Dallas anytime soon, so no delivery possible. Let me know. mahanian, if 72K20 passes, you're up. Thanks all. __________________ '72 Chevy Blazer

03-30-2010, 11:07 PM	#17
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: FS: 67-72 Floor Shift Tilt Column $250 shipped is a very good price.If neither or these guys get it let me know.

04-03-2010, 12:45 PM	#18
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: FS: 67-72 Floor Shift Tilt Column Payment sent!

04-05-2010, 10:23 PM	#19
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: FS: 67-72 Floor Shift Tilt Column Sold to mahanian! Thanks. __________________ '72 Chevy Blazer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.