Needed: Brake lever pin - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ackattack · 03-12-2010, 02:36 AM

Does any have or know where to get a brake lever pin. The pin I'm refering to goes on the back of the master cylinder. The lever has 3 holes in it, the bottom hole bolts to the bracket itself and pivots off of that. The middle hole goes to the brake pedal through the fire wall and the top one goes to the back of the brake booster.

I need the pin/spring clip that goes to the middle hole. I lost mine somewhere along the way of doing my restoration. Right now there is a bolt on there with a lock nut, however the bolt is too short that I can't get the locknut to "engage" the locking feature. There isn't enough room for a longer bolt. I haven't found any where that sells them.

So if someone has one around or knows where to get one let me know.

Ackattack · 03-12-2010, 02:29 PM

Buhler, Buhler???

Brad · 03-12-2010, 02:32 PM

Check with Livrat, ClassicHeartbeat, or Pickmup-they might be able to hook you up.

mbgmike · 03-12-2010, 07:03 PM

There is really nothing special about it. Any pin the right size will work. Go to a good hardware store

cdowns · 03-12-2010, 07:12 PM

Quote:

Originally Posted by mbgmike

There is really nothing special about it. Any pin the right size will work. Go to a good hardware store

b4 going measure thge inside diameter of the hole and the length needed so you can get one that fits

03-12-2010, 02:36 AM	#1
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Needed: Brake lever pin Does any have or know where to get a brake lever pin. The pin I'm refering to goes on the back of the master cylinder. The lever has 3 holes in it, the bottom hole bolts to the bracket itself and pivots off of that. The middle hole goes to the brake pedal through the fire wall and the top one goes to the back of the brake booster. I need the pin/spring clip that goes to the middle hole. I lost mine somewhere along the way of doing my restoration. Right now there is a bolt on there with a lock nut, however the bolt is too short that I can't get the locknut to "engage" the locking feature. There isn't enough room for a longer bolt. I haven't found any where that sells them. So if someone has one around or knows where to get one let me know. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index Last edited by Ackattack; 03-12-2010 at 02:36 AM.

03-12-2010, 02:29 PM	#2
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Re: Needed: Brake lever pin Buhler, Buhler??? __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

03-12-2010, 02:32 PM	#3
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	Re: Needed: Brake lever pin Check with Livrat, ClassicHeartbeat, or Pickmup-they might be able to hook you up. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

03-12-2010, 07:03 PM	#4
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Needed: Brake lever pin There is really nothing special about it. Any pin the right size will work. Go to a good hardware store

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.