|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-16-2010, 07:59 PM
|
#1 |
|
Registered User
Join Date: Jan 2010
Location: HAMPSTEAD,MD
Posts: 94
|
Grounding plastic fuel cells
I am putting a plastic fuel cell in my 67's bed. Everything i read says to properly ground it. How do you ground a plastic fuel cell? It has an alunimum neck bolted on. I could ground one of the mounting bolts. The sending unit is grounded. I cant think of anything else. Any ideas?
|
|
|
|
03-16-2010, 08:04 PM
|
#2 |
|
Registered User
Join Date: Jan 2009
Location: Pittsburg PA
Posts: 246
|
Re: Grounding plastic fuel cells
Hey !! where are you in hampstead ?? cool little town . anyway you need to ground the sending unit to body or frame plastic tank should have a ground installed by hot glue or 2part epoxy you will want to use a shielded gound strap to the frame or body same as the sending unit and your done.
__________________
lifted, locked, rockin |
|
|
|
|
03-16-2010, 08:19 PM
|
#3 |
|
Senior Member
 
Join Date: Sep 2000
Location: Agency IA.
Posts: 1,847
|
Re: Grounding plastic fuel cells
yes run a ground from one of the mounting bolts it will prevent static sparks while fulling.
__________________
72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa Last edited by JDL; 03-16-2010 at 08:19 PM. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
