tire size question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldsub86 · 02-04-2003, 11:12 PM

I cannot recall what size tire my truck came with from the factory. If I went out and looked at the glove box decal I could find out.
My question is how that relates to modern tire descriptions. I wonder what diameter or circumference of a current tire is equl to the original size.
Anyone out there know of a chart somewhere that will tell you the answer?

Suicide-D · 02-04-2003, 11:38 PM

Sorry...I don't know the answer... I want to keep an eye on this thread. This way I'll get an email when someone answers it.

blazunfool · 02-05-2003, 12:19 AM

Most tire stores have a "Tire Size Guide" book to tell you tire size.
I will try and research sizes to answer your question.

oldsub86 · 02-05-2003, 11:05 PM

answering my own question

did a quick search on the net

have a look at this site

http://www.turbinecar.com/tires.htm

Suicide-D · 02-05-2003, 11:24 PM

my problem is I have no idea what to start with... the plate on the glove box door is painted over...3 or 4 times...what size tire was common in 71 on a 6 banger 3 speed vanilla truck? it has a 4.10 rear end, not sure if that was original though. I know it has the wrong gear in the tranny cause my speedo is on crack 99% of the time...I'm running 235/75-15's on it now and it's still off

02-04-2003, 11:12 PM	#1
oldsub86 Registered User Join Date: Dec 2002 Location: Canada Posts: 695	tire size question I cannot recall what size tire my truck came with from the factory. If I went out and looked at the glove box decal I could find out. My question is how that relates to modern tire descriptions. I wonder what diameter or circumference of a current tire is equl to the original size. Anyone out there know of a chart somewhere that will tell you the answer? __________________ 1968 Chevy - 292 with a powerglide

02-05-2003, 12:19 AM	#3
blazunfool Registered User Join Date: Jan 2003 Location: WESTMINSTER, MD Posts: 60	Most tire stores have a "Tire Size Guide" book to tell you tire size. I will try and research sizes to answer your question. __________________ 72 2wd Blazer 305TBI/700r4., 69 C10 SWB 400SB TPI, 400trans, Step side ., 72 4WD Blazer 350 TBI, 350 serp. drive & "Old Air" ., 94 Camaro Z28 LT1., 94 Grand Cherokee V8, 95 Grand Cherokee 6cyl.

02-05-2003, 11:05 PM	#4
oldsub86 Registered User Join Date: Dec 2002 Location: Canada Posts: 695	answering my own question did a quick search on the net have a look at this site http://www.turbinecar.com/tires.htm __________________ 1968 Chevy - 292 with a powerglide

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-04-2003, 11:38 PM	#2
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	Sorry...I don't know the answer... I want to keep an eye on this thread. This way I'll get an email when someone answers it.

02-05-2003, 11:24 PM	#5
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	my problem is I have no idea what to start with... the plate on the glove box door is painted over...3 or 4 times...what size tire was common in 71 on a 6 banger 3 speed vanilla truck? it has a 4.10 rear end, not sure if that was original though. I know it has the wrong gear in the tranny cause my speedo is on crack 99% of the time...I'm running 235/75-15's on it now and it's still off



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.