|
03-22-2010, 05:24 PM
|
#1 |
|
Registered User
Join Date: Sep 2009
Location: Miami, FL
Posts: 25
|
63 rear end
I looked through this web site and can not find the answer. I have a 63 rear end. brake assembly removed axle shafts removed. However the brake backing plate is putting up a fight how is this removed it seems it is pressed on?? it is not bolted in place.
Thanks |
|
|
|
03-22-2010, 05:54 PM
|
#2 |
|
Registered User
Join Date: Jun 2005
Location: winnipeg
Posts: 17
|
Re: 63 rear end
Ya mine were a bit rusted on as well, if you have the 12 bolt rear the backing plates are pressed on with a fine spline to keep them from turning. i heated them up and hamered them off. good luck
|
|
|
|
|
03-23-2010, 01:40 AM
|
#3 |
|
Registered User
Join Date: Dec 2007
Location: N Texas
Posts: 580
|
Re: 63 rear end
Are you trying to convert to rear disc's? I didn't find any help or "bolt on" conversions for '63, because of the pressed on plate. I decided to take the easy way out and just keep drum brakes on the rear. You are going to have to do some fab/welding to mount a flange, etc. Post your progress, we would love to see your solutions. Good luck.
__________________
292 + TKO500 |
|
|
|
 |
| Bookmarks |
| Tags |
| backing plate, brakes, rear end |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
