CA Parting 84 4x4 stepside (what's left of it) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 04-05-2010, 06:12 PM

I have a Scottsdale that I will be chopping up soon. The engine, trans, and t-case are gone. Not much is left on the interior. Sway bar sold.
10 bolt axels $100 each local
stepside bed driver cond. $150 local may consider selling it in pieces
slider rear window $30 local
door panels $25pr. plus shipping
receiver hitch $50 plus shipping
If there is anything you see just ask and I will sell cheap. Thanks, Ray

*Stitch* · 04-05-2010, 06:26 PM

are both of the fender emblems there and do they say diesel on them...if so, I'll take them if they're in alright shape...also, the hydroboost how much for all that...thanks Ray

one more thing, does it have the glow plug light harness in the dash behind the gauge cluster...I need that and the insert that goes in the gauge bezel..thanks

kenm78 · 04-05-2010, 07:43 PM

Are the wheels in good shape? How much for them if they are for sale? Not sure if it would be cost effective or not zip code is 73020. Thanks.

centexan · 04-05-2010, 08:09 PM

How much for those warn hubs (if you're willing to part them off the axles)? Thanks

54Caddy · 04-05-2010, 08:47 PM

how much for the rear fenders? more pictures?

KrazyRay · 04-05-2010, 11:24 PM

Quote:

Originally Posted by Fat Hoe

are both of the fender emblems there and do they say diesel on them...if so, I'll take them if they're in alright shape...also, the hydroboost how much for all that...thanks Ray

one more thing, does it have the glow plug light harness in the dash behind the gauge cluster...I need that and the insert that goes in the gauge bezel..thanks

Chuck, The hydroboost is $55 shipped but it is missing the hoses and I have 1 diesel fender emblem $5 plus shipping but free shipping if its thrown in with the hydroboost. There is no cluster and the wires were hacked. Thanks, Ray

KrazyRay · 04-05-2010, 11:29 PM

Quote:

Originally Posted by kenm78

Are the wheels in good shape? How much for them if they are for sale? Not sure if it would be cost effective or not zip code is 73020. Thanks.

The wheels are in good shape except some curb rash that I think can be sanded and polished out. $100 for the set but the shipping looks to be $20 per wheel. Thanks, Ray

KrazyRay · 04-05-2010, 11:33 PM

Quote:

Originally Posted by centexan

How much for those warn hubs (if you're willing to part them off the axles)? Thanks

I would like to sell the axle whole right now but will consider it soon. Thanks, Ray

KrazyRay · 04-05-2010, 11:55 PM

Quote:

Originally Posted by 54Caddy

how much for the rear fenders? more pictures?

The rear fenders are in pretty good shape but I would like to sell the whole bed right now. Will get more pics. Thanks, Ray

centexan · 04-06-2010, 08:22 AM

Quote:

Originally Posted by KrazyRay

I would like to sell the axle whole right now but will consider it soon. Thanks, Ray

Thanks Ray. Just let me know.

85burb · 04-12-2010, 06:28 PM

How does the power steering box look if it still has one? Will it fit a 85 4x4 burb?

benoit454 · 04-12-2010, 09:16 PM

just curious but are you going to use the wheels on it or are they sold? if not how much and what about shipping to logan wv 25601?

Also how about the guts out of the rear end if you know the ratio? Looking for the whole carrier, pinion, spacers and all the center pieces, don't need the axle shafts. Also would need it shipped as well.

KrazyRay · 04-13-2010, 10:05 AM

Quote:

Originally Posted by benoit454

just curious but are you going to use the wheels on it or are they sold? if not how much and what about shipping to logan wv 25601?

Also how about the guts out of the rear end if you know the ratio? Looking for the whole carrier, pinion, spacers and all the center pieces, don't need the axle shafts. Also would need it shipped as well.

The wheels are $100 but the shipping will almost double the cost. I want to leave the rear end as a whole, but I think its a 3.42 Thanks, Ray

Geezer2 · 04-25-2010, 08:28 PM

I could be interested in the rear axle, espeically if it is 2.73 28 spline 10 bolt.

thanks

FamilyMike · 04-25-2010, 09:11 PM

power or manual windows? If manual how much for regulators, handles etc. to 30115?

KrazyRay · 04-26-2010, 12:09 AM

Quote:

Originally Posted by Geezer2

I could be interested in the rear axle, espeically if it is 2.73 28 spline 10 bolt.

thanks

Sorry, I don't ship axles.

Quote:

Originally Posted by FamilyMike

power or manual windows? If manual how much for regulators, handles etc. to 30115?

Sorry, power windows.

Geezer2 · 04-26-2010, 08:14 AM

[QUOTE=Sorry, I don't ship axles.[/QUOTE]

How about a carrier?

ECU PIRATE · 04-26-2010, 01:33 PM

Ray,

Is this a single headlight set up or dual headlights? I am looking for both LH/RH headlights bezels for a 83-87 set up with single headlights. Any grill trim?

Thanks,

Mike

KrazyRay · 04-26-2010, 02:30 PM

Quote:

Originally Posted by ECU PIRATE

Ray,

Is this a single headlight set up or dual headlights? I am looking for both LH/RH headlights bezels for a 83-87 set up with single headlights. Any grill trim?

Thanks,

Mike

Mike, The front was all smashed up on this one. I'm working out of town and it may be awhile for me to check what I have laying around. Thanks, Ray

ECU PIRATE · 04-26-2010, 03:53 PM

Quote:

Originally Posted by KrazyRay

Mike, The front was all smashed up on this one. I'm working out of town and it may be awhile for me to check what I have laying around. Thanks, Ray

No rush Ray. We'll talk when you get back

Rogue_Sentinel · 04-26-2010, 11:00 PM

i need some more door panels pics ,when you get the time . i would love to have that bed but i live to far away

.

out side door handles two
shipping to 27030 ? thanks 4 ur time

Chevytrux4me · 04-26-2010, 11:53 PM

Hey, do you have door locks & keys?

Thanks,
Randy

jamestheman200 · 04-28-2010, 12:20 AM

Seat belts for sale? pics?

KrazyRay · 05-01-2010, 10:02 AM

Quote:

Originally Posted by Rogue_Sentinel

i need some more door panels pics ,when you get the time . i would love to have that bed but i live to far away

.
Sorry, the door panels were not that good so they went to the crusher.

out side door handles two
shipping to 27030 ? thanks 4 ur time

The door handles went to the crusher.

Quote:

Originally Posted by Chevytrux4me

Hey, do you have door locks & keys?

Thanks,
Randy

This truck did not have keys.

Quote:

Originally Posted by jamestheman200

Seat belts for sale? pics?

This truck did not have seat belts.
The only things left on this truck is the axles and wheels; the rest went to the crusher and the back end became a pick up bed trailer. Thanks, Ray

04-05-2010, 06:12 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting 84 4x4 stepside (what's left of it) I have a Scottsdale that I will be chopping up soon. The engine, trans, and t-case are gone. Not much is left on the interior. Sway bar sold. 10 bolt axels $100 each local stepside bed driver cond. $150 local may consider selling it in pieces slider rear window $30 local door panels $25pr. plus shipping receiver hitch $50 plus shipping If there is anything you see just ask and I will sell cheap. Thanks, Ray Attached Images

04-05-2010, 06:26 PM	#2
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Parting 84 4x4 stepside (what's left of it) are both of the fender emblems there and do they say diesel on them...if so, I'll take them if they're in alright shape...also, the hydroboost how much for all that...thanks Ray one more thing, does it have the glow plug light harness in the dash behind the gauge cluster...I need that and the insert that goes in the gauge bezel..thanks Last edited by Stitch; 04-05-2010 at 06:27 PM.

04-05-2010, 07:43 PM	#3
kenm78 Broken Down Join Date: Dec 2006 Location: Choctaw, Oklahoma Posts: 1,267	Re: Parting 84 4x4 stepside (what's left of it) Are the wheels in good shape? How much for them if they are for sale? Not sure if it would be cost effective or not zip code is 73020. Thanks. __________________ kenm78 1982 Chevy 4X4 Project truck “It’s better to keep your mouth shut and let people wonder about your ignorance, than open your mouth and reveal all doubt”

04-05-2010, 08:09 PM	#4
centexan Registered User Join Date: Aug 2006 Location: Austin, Texas Posts: 167	Re: Parting 84 4x4 stepside (what's left of it) How much for those warn hubs (if you're willing to part them off the axles)? Thanks __________________ 1989 Chevy Suburban v1500

04-05-2010, 08:47 PM	#5
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: Parting 84 4x4 stepside (what's left of it) how much for the rear fenders? more pictures? __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

04-12-2010, 06:28 PM	#11
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: Parting 84 4x4 stepside (what's left of it) How does the power steering box look if it still has one? Will it fit a 85 4x4 burb? __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

04-12-2010, 09:16 PM	#12
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Parting 84 4x4 stepside (what's left of it) just curious but are you going to use the wheels on it or are they sold? if not how much and what about shipping to logan wv 25601? Also how about the guts out of the rear end if you know the ratio? Looking for the whole carrier, pinion, spacers and all the center pieces, don't need the axle shafts. Also would need it shipped as well. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

04-25-2010, 08:28 PM	#14
Geezer2 Registered User Join Date: Aug 2008 Location: Mid Illinois Posts: 37	Re: Parting 84 4x4 stepside (what's left of it) I could be interested in the rear axle, espeically if it is 2.73 28 spline 10 bolt. thanks

04-25-2010, 09:11 PM	#15
FamilyMike Registered User Join Date: Mar 2010 Location: Canton Georgia Posts: 50	Re: Parting 84 4x4 stepside (what's left of it) power or manual windows? If manual how much for regulators, handles etc. to 30115?

04-26-2010, 08:14 AM	#17
Geezer2 Registered User Join Date: Aug 2008 Location: Mid Illinois Posts: 37	Re: Parting 84 4x4 stepside (what's left of it) [QUOTE=Sorry, I don't ship axles.[/QUOTE] How about a carrier?

04-26-2010, 01:33 PM	#18
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: Parting 84 4x4 stepside (what's left of it) Ray, Is this a single headlight set up or dual headlights? I am looking for both LH/RH headlights bezels for a 83-87 set up with single headlights. Any grill trim? Thanks, Mike __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

04-26-2010, 11:00 PM	#21
Rogue_Sentinel Registered User Join Date: Mar 2009 Location: nc, mount airy Posts: 376	Re: Parting 84 4x4 stepside (what's left of it) i need some more door panels pics ,when you get the time . i would love to have that bed but i live to far away . out side door handles two shipping to 27030 ? thanks 4 ur time __________________ "Myths and legends die hard in America. We love them for the extra dimension they provide, the illusion of near-infinite possibility to erase the narrow confines of most men's reality. Weird heroes and mould-breaking champions exist as living proof to those who need it that the tyranny of 'the rat race' is not yet final." Hunter S THompson Last edited by Rogue_Sentinel; 04-26-2010 at 11:02 PM.

04-26-2010, 11:53 PM	#22
Chevytrux4me Certified Gearhead Join Date: Feb 2007 Location: Athens, West Virginia Posts: 186	Re: Parting 84 4x4 stepside (what's left of it) Hey, do you have door locks & keys? Thanks, Randy __________________ "I drive my pickup into the big city, 'n write my room number right on the bottom o' my boot. Jus' so I don't forget where I live. That's right, y'all. That's how I roll!"

04-28-2010, 12:20 AM	#23
jamestheman200 Registered User Join Date: Apr 2010 Location: Roseburg, Oregon Posts: 1	Re: Parting 84 4x4 stepside (what's left of it) Seat belts for sale? pics?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.