got my new wheels today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevroletrestoguy · 04-07-2010, 07:36 PM

Well at least 3 of them. They are series 33 wheel vintiques, 15" x 8" with 4" backspacing and imo they look sweet. I have done disc brakes all the way around and have no problem with the rears. They fit good back there. The fronts also fit but there is about 1/4" clearance max with the outer tie rod end. I don't yet know whats going to happen when I got the front end on the ground. Is this going to work or is it too close? Do I need to look at going to a 15" x 7" on the front??? Here are some pictures:

dlisabeth · 04-07-2010, 07:49 PM

I think you'll be good to go on the front. The distance between your wheel and spindle should never change.

SCOTI · 04-07-2010, 08:05 PM

You'll prob need to use adhesive wheel weights vs. traditional clamp-on style weights.

Oklahoma · 04-07-2010, 08:39 PM

I run 15's with the same clearance, and the weights on the inside don't hit, so you will be fine.

*blackedoutharley* · 04-08-2010, 03:32 AM

Changing the wheel width will not affect the distance to the steering knuckle; decreasing the back spacing does this.

Like others have said though you should have no issues.

chevroletrestoguy · 04-08-2010, 08:50 AM

Thanks for the info. I wasn't sure if I needed to go another route on the front or not.

**DPowers** · 04-08-2010, 10:38 AM

They're gonna look good

62much · 04-08-2010, 12:54 PM

I Just got my wheels today too!! I went with 15"x8" & 15"x7" large I.D. Rallys. Had to special order them from Early Wheel in CA. They come with a larger inside diameter to clear Calipers, tie rods, etc. They take a 15" tire but have the I.D. of a 16". Took about 4 weeks to get. They're Chrome with steel centers that I'm going to paint dark gray metallic and I have Disc Brake Caps to put on - Cant' wait to get on... will post pics when I get them mounted.

nomrlz · 04-08-2010, 01:15 PM

like others said. distance shouldn't change and you should be fine

chevroletrestoguy · 04-08-2010, 02:02 PM

So what's you guys opinions on optimal tire size???

62much · 04-08-2010, 03:53 PM

Quote:

Originally Posted by chevroletrestoguy

So what's you guys opinions on optimal tire size???

I'm going to run TA's : 255 70R15 Rear, 235 70R15 Front... should fill up the fenders ok

**scotts62** · 04-08-2010, 07:49 PM

Cool! I like those!

protrash64 · 04-08-2010, 08:36 PM

Quote:

Originally Posted by chevroletrestoguy

So what's you guys opinions on optimal tire size???

Big as possible

04-07-2010, 07:36 PM	#1
chevroletrestoguy Registered User Join Date: Feb 2007 Location: USA Posts: 201	got my new wheels today Well at least 3 of them. They are series 33 wheel vintiques, 15" x 8" with 4" backspacing and imo they look sweet. I have done disc brakes all the way around and have no problem with the rears. They fit good back there. The fronts also fit but there is about 1/4" clearance max with the outer tie rod end. I don't yet know whats going to happen when I got the front end on the ground. Is this going to work or is it too close? Do I need to look at going to a 15" x 7" on the front??? Here are some pictures: Last edited by chevroletrestoguy; 04-07-2010 at 07:43 PM. Reason: pictures

04-07-2010, 07:49 PM	#2
dlisabeth Registered User Join Date: Oct 2009 Location: Howell, Michigan Posts: 102	Re: got my new wheels today I think you'll be good to go on the front. The distance between your wheel and spindle should never change. __________________ 1965 Shortbed stepside Chevrolet C-10 My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=409676

04-07-2010, 08:05 PM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: got my new wheels today You'll prob need to use adhesive wheel weights vs. traditional clamp-on style weights. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-07-2010, 08:39 PM	#4
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: got my new wheels today I run 15's with the same clearance, and the weights on the inside don't hit, so you will be fine.

04-08-2010, 03:32 AM	#5
blackedoutharley Account Suspended Join Date: Jul 2007 Location: Plumas Lake, Ca. Posts: 1,009	Re: got my new wheels today Changing the wheel width will not affect the distance to the steering knuckle; decreasing the back spacing does this. Like others have said though you should have no issues.

04-08-2010, 08:50 AM	#6
chevroletrestoguy Registered User Join Date: Feb 2007 Location: USA Posts: 201	Re: got my new wheels today Thanks for the info. I wasn't sure if I needed to go another route on the front or not.

04-08-2010, 10:38 AM	#7
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: got my new wheels today They're gonna look good __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

04-08-2010, 12:54 PM	#8
62much Registered User Join Date: Mar 2010 Location: HILLSBORO, OR Posts: 137	Re: got my new wheels today I Just got my wheels today too!! I went with 15"x8" & 15"x7" large I.D. Rallys. Had to special order them from Early Wheel in CA. They come with a larger inside diameter to clear Calipers, tie rods, etc. They take a 15" tire but have the I.D. of a 16". Took about 4 weeks to get. They're Chrome with steel centers that I'm going to paint dark gray metallic and I have Disc Brake Caps to put on - Cant' wait to get on... will post pics when I get them mounted. Last edited by 62much; 04-08-2010 at 03:49 PM.

04-08-2010, 01:15 PM	#9
nomrlz Registered User Join Date: Jan 2010 Location: Wataga,IL Posts: 666	Re: got my new wheels today like others said. distance shouldn't change and you should be fine

04-08-2010, 02:02 PM	#10
chevroletrestoguy Registered User Join Date: Feb 2007 Location: USA Posts: 201	Re: got my new wheels today So what's you guys opinions on optimal tire size???

04-08-2010, 07:49 PM	#12
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: got my new wheels today Cool! I like those! __________________ Scott 93 crew cab build Project 62

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.