700r4 to NV4500 swap. Help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

seasno · 04-13-2010, 06:47 PM

Alright im doing a NV4500 swap in my 84 k10. 700r4 to nv4500

I have an NV4500 tranny bell housing and clutch off of a 90's chevy 3/4 ton.
I have a NP205 32 spline transfercase
Hays Super truck clutch
Flywheel off of an early 90s chevrolet with an NV4500
All of the 80's clutch pedal and brake pedal stuff.
All of the nv4500 hyrdo clutch stuff

Now what do i do about converting the 80's pedals to the hydro clutch set up? and is there anything else i will need?

Thanks,
Zack.

04-13-2010, 06:47 PM	#1
seasno Registered User Join Date: Mar 2006 Location: Meredith, NH Posts: 4	700r4 to NV4500 swap. Help! Alright im doing a NV4500 swap in my 84 k10. 700r4 to nv4500 I have an NV4500 tranny bell housing and clutch off of a 90's chevy 3/4 ton. I have a NP205 32 spline transfercase Hays Super truck clutch Flywheel off of an early 90s chevrolet with an NV4500 All of the 80's clutch pedal and brake pedal stuff. All of the nv4500 hyrdo clutch stuff Now what do i do about converting the 80's pedals to the hydro clutch set up? and is there anything else i will need? Thanks, Zack.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.