FL WTB-Shifter Parts / Standard Transmission - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**D.PASSMORE** · 05-12-2010, 06:51 AM

APP: SM 465 / 4x4 - I need the little square peice that fits at the end of the Z-Bar. It holds the shaft in place on the frame mount. Or If any one has a complete good working assembly - Z-Bar, both ball studs on each end/square retainer peice and push rod that goes from the clutch pedal to Z-Bar. I'll take a look at ...

Update: I've added some pictures. The square peice fits on the outer stud that is mounted in the groove on the frame bracket.

Thanks

duallyjams · 05-12-2010, 08:49 AM

what year,I believe there are two different styles.

Duncan and son · 05-12-2010, 09:20 AM

Quote:

Originally Posted by D.PASSMORE

APP: SM 465 / 4x4 - I need the little square peice that fits at the end of the Z-Bar. It holds the shaft in place on the frame mount. Or If any one has a complete good working assembly - Z-Bar, both ball studs on each end/square retainer peice and push rod that goes from the clutch pedal to Z-Bar. I'll take a look at ...

Thanks

Hey David, coach me some. We are parting out a 72 350 3sp column shift that was low milage and everything is nice and tight. Will any of these items work for you or is the 4sp 4x4 completely different?
Always appreciate you Paul

**D.PASSMORE** · 05-12-2010, 04:43 PM

Its going on my '72 Blazer. I can't find the little square peice at the end (frame side)... Anyway, I believe the Z-bars are different on 2wd and 4 wd and 4 SP top loader compared to a column 3 SP. I might take pictures and post for clarity. Any other comments would be welcome.

**michael bustamante** · 05-12-2010, 05:25 PM

this is from a 67 2wd with a 3 speed and granny gear, floor shift. probably NOT what you need

duallyjams · 05-12-2010, 07:28 PM

I have a 69 4x4 burb with smblk 465 that has the complete set up,I'll try to get pic when it safe to go out side( poring rain )

**D.PASSMORE** · 05-12-2010, 10:19 PM

Quote:

Originally Posted by michael bustamante

this is from a 67 2wd with a 3 speed and granny gear, floor shift. probably NOT what you need

Yeah, that is on the frame. I need the square peice that fits on the end of the outside z-bar/ball stud, which fits in the groove and holds the complete Z-bar assy in place.

**D.PASSMORE** · 05-12-2010, 10:19 PM

Quote:

Originally Posted by duallyjams

I have a 69 4x4 burb with smblk 465 that has the complete set up,I'll try to get pic when it safe to go out side( poring rain )

Sounds good!

**D.PASSMORE** · 05-13-2010, 08:48 PM

Ttt

duallyjams · 05-15-2010, 08:18 AM

I think the part you are looking for is missing from this set up also Name: DSCN0966.jpg
Views: 143
Size: 51.8 KB

dazza · 05-15-2010, 09:16 AM

I re-installed mine a few months ago and after seeing your post I had to go check and see how I did installed it. Maybe I better look for one too! I remembered that mine didn't have it when I took it apart, so that's how I put it back together. Maybe it's on that "don't forget to check before driving" list I have around here!?

**D.PASSMORE** · 05-15-2010, 10:13 AM

Good news, I found the peice. It was at the bottom of my shop garbage can. My son picked through the garbage before he changed liners and found it. Know idea how it got in there! Anyway, I'll post a picture of it. Thanks

**D.PASSMORE** · 05-15-2010, 10:18 AM

Quote:

Originally Posted by duallyjams

I think the part you are looking for is missing from this set up alsoAttachment 584816

Are you parting this set-up out?

dazza · 05-15-2010, 11:30 AM

Quote:

Originally Posted by D.PASSMORE

Good news, I found the peice. It was at the bottom of my shop garbage can. My son picked through the garbage before he changed liners and found it. Know idea how it got in there! Anyway, I'll post a picture of it. Thanks

Excellent! So can you ask him check the other cans! I need one!

duallyjams · 05-15-2010, 11:35 PM

Quote:

Originally Posted by D.PASSMORE

Are you parting this set-up out?

yes every thing is for sale

05-12-2010, 06:51 AM	#1
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	WTB-Shifter Parts / Standard Transmission APP: SM 465 / 4x4 - I need the little square peice that fits at the end of the Z-Bar. It holds the shaft in place on the frame mount. Or If any one has a complete good working assembly - Z-Bar, both ball studs on each end/square retainer peice and push rod that goes from the clutch pedal to Z-Bar. I'll take a look at ... Update: I've added some pictures. The square peice fits on the outer stud that is mounted in the groove on the frame bracket. Thanks Attached Images __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie) Last edited by D.PASSMORE; 05-13-2010 at 08:47 PM.

05-12-2010, 08:49 AM	#2
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: WTB-Shifter Parts / Standard Transmission what year,I believe there are two different styles. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

05-12-2010, 04:43 PM	#4
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: WTB-Shifter Parts / Standard Transmission Its going on my '72 Blazer. I can't find the little square peice at the end (frame side)... Anyway, I believe the Z-bars are different on 2wd and 4 wd and 4 SP top loader compared to a column 3 SP. I might take pictures and post for clarity. Any other comments would be welcome.

05-12-2010, 05:25 PM	#5
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: WTB-Shifter Parts / Standard Transmission this is from a 67 2wd with a 3 speed and granny gear, floor shift. probably NOT what you need Attached Images __________________ 1967custom

05-12-2010, 07:28 PM	#6
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: WTB-Shifter Parts / Standard Transmission I have a 69 4x4 burb with smblk 465 that has the complete set up,I'll try to get pic when it safe to go out side( poring rain ) __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

05-13-2010, 08:48 PM	#9
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: WTB-Shifter Parts / Standard Transmission Ttt

05-15-2010, 08:18 AM	#10
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: WTB-Shifter Parts / Standard Transmission I think the part you are looking for is missing from this set up also __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

05-15-2010, 09:16 AM	#11
dazza Registered User Join Date: Aug 2002 Location: California Posts: 971	Re: WTB-Shifter Parts / Standard Transmission I re-installed mine a few months ago and after seeing your post I had to go check and see how I did installed it. Maybe I better look for one too! I remembered that mine didn't have it when I took it apart, so that's how I put it back together. Maybe it's on that "don't forget to check before driving" list I have around here!? __________________ --------------------------------------------------------- I'm not crazy, I'm chosen, there's a difference. ---------------------------- '72 K10 SWB, 350, sm465/np205 ---- ----

05-15-2010, 10:13 AM	#12
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: WTB-Shifter Parts / Standard Transmission Good news, I found the peice. It was at the bottom of my shop garbage can. My son picked through the garbage before he changed liners and found it. Know idea how it got in there! Anyway, I'll post a picture of it. Thanks __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.