|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-15-2010, 11:37 PM
|
#1 |
|
Registered User
 Join Date: Mar 2010
Location: Casper Wyoming
Posts: 46
|
anyone have pics of 3inch x over pipes installed?
im trying to figure out how to install an 3 inch x over pipe on my 85 sqaure body with out the x over hitting the drive line i have a big block with long tube headers on it and plan on running 3 inch alll the way back. if anyone has any pics of their exhaust that they could post up to help me out and give me some ideas i would greatly appreicte it
|
|
|
|
05-16-2010, 12:29 PM
|
#2 |
|
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
|
Re: anyone have pics of 3inch x over pipes installed?
i dont have any pictures, but I ran a 496 with hooker super comp headers with full 3" exhuast. From where the exit of the headers were... somewhat close to the frame line, the entire exhaust was flat/strait, fit with no problems. Truck was probally lowered 2/4.
clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress |
|
|
|
|
05-16-2010, 12:41 PM
|
#3 |
|
Registered User
Join Date: Mar 2010
Location: Casper Wyoming
Posts: 46
|
Re: anyone have pics of 3inch x over pipes installed?
i had true duel 3inch from the headers back. i was wanting to put an x pipe after my headers so that way it would equalize the pressure and let it breath a lil better. but my concern is if its gonna hit the driveline or not
|
|
|
|
|
05-16-2010, 06:04 PM
|
#4 |
|
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
|
Re: anyone have pics of 3inch x over pipes installed?
it will fit, depending on how your pipes are currently ran, depends on how easy it will be to do.
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
