WY 1971 GMC Jimmy 4x4 bucket seats etc. parting

[sharpie1972]

Parting a 1971 GMC 4x4 Jimmy. I will add more pictures and parts as I begin to pull parts. Here is a short list for now. Thanks, Sharpie

Bucket seats with nice brackets. $425 shipped. SOLD

Black console SOLD

Rear seat with correct floor brackets (no clamps). $200 shipped.

Black visors and clips. SOLD

Floor levelling mat. Pictures added to post. $100 shipped. SOLD

[sharpie1972]

more pics

[SCOOBYDOOBYDOO]

how much do you want for the ashtray frame and mounting hardware ??

[sharpie1972]

How about $15 shipped for frame and mounting hardware? Do you need the ashtray itself? If so, $20 shipped for the whole show. Thanks, Sharpie

[SCOOBYDOOBYDOO]

do you have the top reinforcement brackets that bolt from the rear of the top to just above the tailgate on the body ??

[SCOOBYDOOBYDOO]

I see in the picture you also have the factory cigarette lighter how much for that assembly including wiring

[sharpie1972]

Yes, $45 shipped for the pair. Pics attached. Thanks, Sharpie

[SCOOBYDOOBYDOO]

I will take the whole ashtray including the tray and hardware

[SCOOBYDOOBYDOO]

I will take those brackets as well

[SCOOBYDOOBYDOO]

With the hardware right

[sharpie1972]

Yes, hardware included. $15 for lighter and wiring. Thanks, Sharpie

[juicer25]

How much for the front and rear bumper brackets?

[1949gmc]

Dennis- Does this truck have the shield that goes over the gas filler neck on the inside? How about a transfer case skid plate? Thanks, Ray

[SCOOBYDOOBYDOO]

I will take it. Sounds good $80.00 total I will send payment today
So the ashtray with hardware the top brackets with hardware and the cig lighter with hardware.

Thank you

[sharpie1972]

Juicer: I'm guessing you know the front brackets are GMC specific and the rear is an aftermarket step bumper.

Hi Ray, no skid plate. I've got a nice filler neck cover. $30 shipped. How's the project coming?

Scoobydoo: PM sent

Thanks, Sharpie

[sharpie1972]

Pics of floor levelling mats.

[gm71jimmy]

Hi Sharpie
Need the rear carpet hold downs front and rear also the side pieces for the tailgate seals. I see them in your pictures. How much for all? Also need the front bumper brackets and the front park light assemblys
Thank you Allen in Overton NV

[sharpie1972]

Hi Allen, Glad to see you joined the Truck Board! Great guys on here! I've got 2 sets of carpet strips, HYBRIDCHEVY71 is in line for a set and you're next. I just pulled the bucket seats today and can get you good pictures and measurements if you still need them for your floor work. Prices are as follows for the parts you are interested in:

Carpet strips: $75 for a pair
Side trims for tailgate seals: $25 pair
Front bumper brackets: $75 for all 4
Front park assemblies: $50 pair

All prices include shipping. Thanks, Sharpie

[gm71jimmy]

Originally Posted by sharpie1972

Hi Allen, I've got 2 sets of carpet strips, HYBRIDCHEVY71 is in line for a set and you're next. I just pulled the bucket seats today and can get you good pictures and measurements if you still need them for your floor work. Prices are as follows for the parts you are interested in:

Carpet strips: $75 for a pair
Side trims for tailgate seals: $25 pair
Front bumper brackets: $75 for all 4
Front park assemblies: $50 pair

All prices include shipping. Thanks, Sharpie

Hi Sharpie
Would you do 200.00 shipped for all? And yes when you get a chance i do still need the measurements.
Thank you Allen

[1949gmc]

Originally Posted by sharpie1972

Hi Ray, no skid plate. I've got a nice filler neck cover. $30 shipped. How's the project coming?

I will take the cover and paypal you the $$. No problem on the skid plate, but would you have an a/c battery box yet? Project has been extremely slow the last 6 weeks due to all of my kids' spring sports. I'm hoping to start moving forward more rapidly now, though. Got all floor and rocker rust fixed up. Wound up replacing the bedsides with the nos pair that I had- thought it would be easier than patching the rust holes.

[sharpie1972]

Hi Allen, $200 for all would be fine. Paypal: denscustom1@hotmail.com

Hi Ray, Haven't scored a good AC tray yet, but I'll let you know if one shows up.

Thanks, Dennis

[JimmyFloyd]

Windshield frame if you are cutting it up. Possibly the tail gate if it is in good shape.

[sharpie1972]

Hi Jimmy, not cutting up yet. I need to finish cleaning up the floors for pictures.
LKS DCVN has first shot at the bare tub. Thanks, Sharpie

[JimmyFloyd]

No problem. I would have considered the whole thing if it wasn't so much to get it out here.

[Rochlow]

I'd like the front and rear strips that hold the rear carpet down if those are for sale?