RoLL PaNS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69ChevySB · 02-13-2003, 03:25 PM

Can someone post a few pictures of these 67-72 trucks with rollpans on the front or rear or both..thanks..i want to see whether my truck will look nicer with the rollpan or the chrome bumper thanks..

chevy_fatman · 02-13-2003, 03:54 PM

here's one from the front

chevy_fatman · 02-13-2003, 03:56 PM

and one from the back, this truck is not mine (even tough I wish it was

)

cali_surfer · 02-13-2003, 08:46 PM

Do you know the owner of that truck or did you get that pic off the net? I wanna know what kind of tonneau cover that is.......? I've been looking for one like that but haven't found one.

MellowYellow70 · 02-13-2003, 10:33 PM

An old pic, but you can get the jist, the red on e is so much nicer!!!!

Ackattack · 02-13-2003, 10:56 PM

PrimeredThunder · 02-14-2003, 12:17 AM

Man this really makes me want to install one on my 72'...anyone up for a trade on my rear bumper for a new pan?!

Kenny

Hotrod70C10 · 02-14-2003, 01:52 AM

I was thinking about a sport bumper but now.... i like the roll pan. I also like that bed cover on the red truck only one word for that... "Custom"

lost wages · 02-14-2003, 03:06 AM

heres mine as of now

bigjimzlll · 02-14-2003, 10:08 AM

ok...I just installed my roll pan(got it from Wes) the question is how do you get to the two lower tailgate bolts?

lost wages · 02-14-2003, 02:09 PM

i used a wobble joint(universal) and a long extension, its not the easiest set up is it!

Ackattack · 02-14-2003, 06:04 PM

I was looking at my tailgate bolts the other day. I was thinking I'd take it off to go drag racing....well it's going to be one PITA to get it off. Guess I'll try...but won't be fun.

bigjimzlll · 02-14-2003, 07:17 PM

by opening the gate a gained 2 tenths in the 1/4

Hotrod70C10 · 02-15-2003, 05:35 AM

2 tenths!?!?! I didn't realize the tailgate was that much of a parachute!

71Seth · 02-15-2003, 08:50 PM

Quote:

Originally posted by cali_surfer
Do you know the owner of that truck or did you get that pic off the net? I wanna know what kind of tonneau cover that is.......? I've been looking for one like that but haven't found one.

that cover looks like it came fromm Checkmate bed covers.. They are made here in my home town just across from my old high school. I have one on my s-10. THey are sold and shipped all over the place. Heres the add www.checkerpro.com good luck
seth

02-13-2003, 03:25 PM	#1
69ChevySB dropped69 Join Date: Jan 2003 Location: Grand Canyon State Posts: 120	RoLL PaNS Can someone post a few pictures of these 67-72 trucks with rollpans on the front or rear or both..thanks..i want to see whether my truck will look nicer with the rollpan or the chrome bumper thanks..

02-13-2003, 03:54 PM	#2
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	here's one from the front Attached Images __________________ Paul How do you make the invisible, visible?.........You take it away.

02-13-2003, 03:56 PM	#3
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	and one from the back, this truck is not mine (even tough I wish it was ) Attached Images __________________ Paul How do you make the invisible, visible?.........You take it away.

02-13-2003, 08:46 PM	#4
cali_surfer Registered User Join Date: Jun 2000 Location: Chico, CA Posts: 1,136	Do you know the owner of that truck or did you get that pic off the net? I wanna know what kind of tonneau cover that is.......? I've been looking for one like that but haven't found one. __________________ My engine is stock... trust me ;o)

02-13-2003, 10:33 PM	#5
MellowYellow70 Registered User Join Date: Sep 2000 Location: Gower, MO. Posts: 222	An old pic, but you can get the jist, the red on e is so much nicer!!!! Attached Images __________________ If patience is truely a virtue, Then I am so screwed 1970 Chevy SWB 331 sbc and all the goodies. Under resurection 2001 Vette

02-13-2003, 10:56 PM	#6
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,524	__________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

02-14-2003, 12:17 AM	#7
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Man this really makes me want to install one on my 72'...anyone up for a trade on my rear bumper for a new pan?! Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

02-14-2003, 01:52 AM	#8
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	I was thinking about a sport bumper but now.... i like the roll pan. I also like that bed cover on the red truck only one word for that... "Custom" __________________ 70' C-10 LWB Fleetside 4.5/6 drop

02-14-2003, 03:06 AM	#9
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	heres mine as of now Attached Images

02-14-2003, 10:08 AM	#10
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	ok...I just installed my roll pan(got it from Wes) the question is how do you get to the two lower tailgate bolts? __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

02-14-2003, 02:09 PM	#11
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	i used a wobble joint(universal) and a long extension, its not the easiest set up is it!

02-14-2003, 06:04 PM	#12
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,524	I was looking at my tailgate bolts the other day. I was thinking I'd take it off to go drag racing....well it's going to be one PITA to get it off. Guess I'll try...but won't be fun. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

02-14-2003, 07:17 PM	#13
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	by opening the gate a gained 2 tenths in the 1/4 __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

02-15-2003, 05:35 AM	#14
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	2 tenths!?!?! I didn't realize the tailgate was that much of a parachute! __________________ 70' C-10 LWB Fleetside 4.5/6 drop

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.