![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
![]() Join Date: Jul 2000
Location: North Texas
Posts: 3,489
|
POR-15 dealer in Dallas area?
I need to seal some rusty drip rails on my pickup before seam sealing and paint, and would like to start this weekend. Does anyone know of a POR-15 or Rust Bullet dealer in the Dallas area? From what I understand, there are other products that work similarly, so I'm open to them also.
__________________
Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! |
![]() |
![]() |
![]() |
#2 |
"Hooked on Quack"
Join Date: Apr 2010
Location: Midlothian,TX
Posts: 154
|
Re: POR-15 dealer in Dallas area?
Awesome questions wish I could help but since I am in the exact same boat trying to figure out where to buy I will be following this. We are on opposite sides of town but I need it and want POR.
__________________
Semper Fi, Kevin ![]() ![]() |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: POR-15 dealer in Dallas area?
try your local autobody supplys store many carry POR15products// you can find them in the yellow pages of the phone book
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Nov 2004
Location: Lindenhurst, IL
Posts: 659
|
Re: POR-15 dealer in Dallas area?
Here's a guy on ebay who goes by 'por-outlet' that says he's in Mt Vernon, TX. Don't know how close that is to you.
This is from one of his listings: "Click on the link below to send an email to don@por-outlet.com .. or call us at ( 903-573-1938 ) .." Here's his ebay store: http://stores.ebay.com/POR-15-OUTLET. |
![]() |
![]() |
![]() |
#5 |
Truck and auto performance nut
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
|
Re: POR-15 dealer in Dallas area?
you can get it overnighted to you from Summit Racing.
__________________
Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2007
Location: DFW (Forney)
Posts: 1,529
|
Re: POR-15 dealer in Dallas area?
Locally , you should be able to go right in and buy it at any "English color supply", or "Finishmaster" store here in DFW. Sherwin Williams and /or Metro color might have some on hand as well.
English color # 214-349-3190 Finishmaster # 972-271-1100
__________________
'58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5 Last edited by Painter D; 06-01-2010 at 07:10 PM. |
![]() |
![]() |
![]() |
#7 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,490
|
Re: POR-15 dealer in Dallas area?
-
I get mine at my local NAPA store... LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
![]() |
![]() |
![]() |
#8 |
Truck and auto performance nut
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
|
Re: POR-15 dealer in Dallas area?
didn't know they carried it...good to know
__________________
Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken |
![]() |
![]() |
![]() |
#9 |
Project '67 454
Join Date: Jan 2009
Location: Columbia SC
Posts: 283
|
Re: POR-15 dealer in Dallas area?
Seam sealer won't stick to POR-15 in the drip rails.
Ask me how I know.
__________________
67 C-10 SWB Fleetside 454 (current project) ![]() 99 Crewcab SWB Dually 454 ![]() 75 Datsun 280ZZ430 ![]() 94 Formula 232LS 454 ![]() |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Nov 2004
Location: Lindenhurst, IL
Posts: 659
|
Re: POR-15 dealer in Dallas area?
|
![]() |
![]() |
![]() |
#11 |
Official Site Guitar Shredder
Join Date: May 2006
Location: Oz
Posts: 3,955
|
Re: POR-15 dealer in Dallas area?
I have bought from the Ebay guy a few times......Great Service..Fast Shipping...
|
![]() |
![]() |
![]() |
#12 | |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,490
|
Re: POR-15 dealer in Dallas area?
Quote:
It should if you prime it while the POR is still tacky (per instructions) LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|