rally wheels?

[my1st69]

what do you guys and gals think are these a good price
http://lasvegas.craigslist.org/pts/1795043089.html
7's in the front and 10 in the rear and will those fit in the rear thanks

[prostreetC-10]

Says nothing about bolt pattern.....car or truck. If they are Camaro/Corvette wheels....no go.

[red69ss]

those are car rallys so they will likely be 5 on 4.75 and your truck is likely 6 lug unless its been converted then it would be 5 on 5. they do make those rims 5 on 5 (I think) but they are more rare.

[my1st69]

good to know well that sucks I lie the rally's too

[red69ss]

does your truck have 5 or 6 lugs? you can find truck rallies in both, the 5 lugs are easier to come by around here usually around $100 and the 6 lugs run a little higher .........become a supporting member and post a wtb in the classified section there are deff. some guys on here with some laying around ,good luck

[petey-pablo]

X2 car rallys trucks are different..

[AirSpeed]

Originally Posted by my1st69

what do you guys and gals think are these a good price
http://lasvegas.craigslist.org/pts/1795043089.html
7's in the front and 10 in the rear and will those fit in the rear thanks

You may be able to find them cheaper, I just today sold 4 15X10 chrome rally wheels for $80, including the center caps. I bought them brand new two years ago and I think I paid $75 each. Look around, you may find a better deal. Aaron

[my1st69]

is that for 6X5.5"

[67ChevyRedneck]

I put those on my truck, they look great. They're available in the aftermarket in the truck patterns, both 5 and 6 lug. Ask the seller for the bolt pattern, you never know. I don't think GM ever made 10" wide rims, so they could be the truck pattern. Mine are 15x8 with 4.5" of backspacing.

I bought mine off of ebay for about $350 shipped brand new. If you have any big swap meets near you that draw a lot of vendors, you might be able to get a deal on a set.

[quentin hill]

Make sure that if you have a stepside to take some pre-measurements if you are going with the 15x10's I just got some from Summit and the wheels are 2" wider than the rear fender. So not sure what to do I want the wheels on my truck. Somethings going to get modified.

[petey-pablo]

Summit raceing online sells them too if you perfer New ....

[hawnprostreetc10]

Originally Posted by prostreetC-10

Says nothing about bolt pattern.....car or truck. If they are Camaro/Corvette wheels....no go.

Wanna to know what ur rallyrims offset in backspaces

[BigMike]

There is a guy here in SoCal that makes them any width you want and just about any offset. I got my 15x10 and 15x7 car style unilug 5x5/5x4.75. I paid $60 ea but that was a few years back. I also got the 15x7 and 15x8 car rally's for my sons 72 Nova. If anyone is interested I can try to track his number down. He is in the Laguna beach area if I recall.

[hawnprostreetc10]

Originally Posted by BigMike

There is a guy here in SoCal that makes them any width you want and just about any offset. I got my 15x10 and 15x7 car style unilug 5x5/5x4.75. I paid $60 ea but that was a few years back. I also got the 15x7 and 15x8 car rally's for my sons 72 Nova. If anyone is interested I can try to track his number down. He is in the Laguna beach area if I recall.

Posted via Mobile Device

[hawnprostreetc10]

I was looking for 15x 14 corvette rally rims backspacing without cut rearend only bed
Posted via Mobile Device

[72BigBlockBurb]

If you go with true GM rally wheels, you'll need to scrounge up some 15x7's for the front if you are going low with your truck or invest in some of the aftermarket wheel tubs. I've been scraping by...sometimes literally...with smaller tires on my front 15x10's to clear the factory tubs that I'm not parting with for any reason.

I've finally found a pair of 15x7's after about 4 months of searching that I'm willing to pay for (they are hard to come by for us 6 lug guys) and now I'm playing the waiting game for them to arrive.

Good luck whichever way you go!