WY Factory jack, crank, and lug wrench sets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 06-29-2010, 08:58 PM

Original 3 piece sets. I have 3 with 1/2 ton lug wrench and 3 with 3/4 ton lug wrench. 2nd picture shows what you will be getting. $65 shipped per set. Thanks, Sharpie

swyfor5 · 06-29-2010, 11:10 PM

Sharpie, not for me, but man, you got the good stuff here!

capev86 · 06-29-2010, 11:47 PM

any idea if the pickup jacks are the same as for a suburban? my 72 burb 3/4 ton is missing the jack, handle and wrench. i need the spare tire holder too but guessing that is a suburban only item! i may be doing business with you shortly!

*sharpie1972* · 06-29-2010, 11:56 PM

No difference that I know of between truck and suburban jack equipment. Sharpie

tjsblazer · 06-30-2010, 01:03 PM

If these are correct for burb, same for a Blazer ???

*sharpie1972* · 06-30-2010, 01:42 PM

I believe the jack is the same. The blazer lug wrench seems to have a little different bend, and the crank is a little shorter on the ones I've had. I have both from a blazer and can put a set together for you. Sharpie

**bignbad** · 06-30-2010, 02:47 PM

I am intrest in 1 3/4 ton jack set

Jobe72 · 06-30-2010, 05:22 PM

Are 3/4 ton lugs a different size?

*sharpie1972* · 06-30-2010, 05:24 PM

3/4 ton lugs are slightly bigger. Sharpie

Jobe72 · 07-01-2010, 10:58 AM

I changed my 1/2 lugs to chrome ones and they are 7/8", will the 3/4 ton fit? that would be awesome if they did. Let me know, thanks!

*sharpie1972* · 07-01-2010, 11:53 AM

Let me check. Sharpie

**driller35** · 07-01-2010, 10:54 PM

Hi Dennis, i,m interested in a crank handle and lug wrench only as i have jack, let me know if you got that seperate from your sets
Thanks Lloyd

*sharpie1972* · 07-01-2010, 11:01 PM

Hi Lloyd, can do. Shipped to Canada? Thanks, Sharpie

**driller35** · 07-01-2010, 11:16 PM

Yes, ship to T2W 1K8, no rush for it Thanks

Jobe72 · 07-05-2010, 09:51 AM

Any chance you got to measure the 3/4 ton wrench? if it's 7/8" I'm interested. thanks.

67 chevy heaven · 07-05-2010, 02:40 PM

Dennis, I have not picked out my lug-nuts. However I know that I will want and need a Good set-up. Can you set me one aside and I will know the dia. by then.
Shawn

*sharpie1972* · 07-05-2010, 04:05 PM

Jobe: I'll check for you.
Shawn: Can do!

Thanks, Shrpie

*sharpie1972* · 08-05-2010, 05:59 PM

Pics for 67 Chevy Heaven.
I have a few 1/2 ton sets left after this one.
Thanks, Sharpie

red71cheyenne · 08-05-2010, 06:11 PM

Sharpie can you post a pic of what the Blazer setup would look like? I know I still have my spring for it, but can't remember if I have the right jack and handle. Thanks.

*sharpie1972* · 08-05-2010, 06:19 PM

Here are some pics of the Blazer jack equipment I have compared to the truck. The lug wrench and crank I have are both shorter for the Blazer, same jack. Maybe some of the Blazer experts can tell us if these are correct and specific to the Blazer or just what came with mine. Thanks, Sharpie

ralphie628 · 08-05-2010, 06:43 PM

Quote:

Originally Posted by driller35

Hi Dennis, i,m interested in a crank handle and lug wrench only as i have jack, let me know if you got that seperate from your sets
Thanks Lloyd

just curious since Dennis split a set and left the jack.. how much for just a jack shipped to 91311?

*sharpie1972* · 08-05-2010, 06:54 PM

$35 shipped. Thanks, Sharpie

red71cheyenne · 08-05-2010, 11:40 PM

Quote:

Originally Posted by sharpie1972

Here are some pics of the Blazer jack equipment I have compared to the truck. The lug wrench and crank I have are both shorter for the Blazer, same jack. Maybe some of the Blazer experts can tell us if these are correct and specific to the Blazer or just what came with mine. Thanks, Sharpie

Thanks for the pic Sharpie. Hope someone will tell us which is right or if they both are?

06-29-2010, 08:58 PM	#1
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Factory jack, crank, and lug wrench sets Original 3 piece sets. I have 3 with 1/2 ton lug wrench and 3 with 3/4 ton lug wrench. 2nd picture shows what you will be getting. $65 shipped per set. Thanks, Sharpie Attached Images

06-29-2010, 11:10 PM	#2
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Factory jack, crank, and lug wrench sets Sharpie, not for me, but man, you got the good stuff here!

06-29-2010, 11:47 PM	#3
capev86 Registered User Join Date: May 2009 Location: Eliot, Maine Posts: 1,314	Re: Factory jack, crank, and lug wrench sets any idea if the pickup jacks are the same as for a suburban? my 72 burb 3/4 ton is missing the jack, handle and wrench. i need the spare tire holder too but guessing that is a suburban only item! i may be doing business with you shortly! Last edited by capev86; 06-29-2010 at 11:48 PM.

06-29-2010, 11:56 PM	#4
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Factory jack, crank, and lug wrench sets No difference that I know of between truck and suburban jack equipment. Sharpie

06-30-2010, 01:03 PM	#5
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: Factory jack, crank, and lug wrench sets If these are correct for burb, same for a Blazer ??? __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

06-30-2010, 01:42 PM	#6
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Factory jack, crank, and lug wrench sets I believe the jack is the same. The blazer lug wrench seems to have a little different bend, and the crank is a little shorter on the ones I've had. I have both from a blazer and can put a set together for you. Sharpie

06-30-2010, 02:47 PM	#7
bignbad Registered User Join Date: Jan 2009 Location: highspire,pa Posts: 423	Re: Factory jack, crank, and lug wrench sets I am intrest in 1 3/4 ton jack set __________________ '72 chevy k20 '06 H-D Springer softail http://www.bluemooncruisers.com/ http://www.enginecycle.com/ ~Eric

06-30-2010, 05:22 PM	#8
Jobe72 Registered User Join Date: Mar 2010 Location: Austin, TX Posts: 299	Re: Factory jack, crank, and lug wrench sets Are 3/4 ton lugs a different size? __________________ 1972 GMC Sierra LWB (Aquafresh) 1962 Cadillac Convertible 1962 Cadillac Sedan project

06-30-2010, 05:24 PM	#9
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Factory jack, crank, and lug wrench sets 3/4 ton lugs are slightly bigger. Sharpie

07-01-2010, 10:58 AM	#10
Jobe72 Registered User Join Date: Mar 2010 Location: Austin, TX Posts: 299	Re: Factory jack, crank, and lug wrench sets I changed my 1/2 lugs to chrome ones and they are 7/8", will the 3/4 ton fit? that would be awesome if they did. Let me know, thanks! __________________ 1972 GMC Sierra LWB (Aquafresh) 1962 Cadillac Convertible 1962 Cadillac Sedan project

07-01-2010, 11:53 AM	#11
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Factory jack, crank, and lug wrench sets Let me check. Sharpie

07-01-2010, 10:54 PM	#12
driller35 Senior Member Join Date: Aug 2009 Location: Calgary,AB Posts: 323	Re: Factory jack, crank, and lug wrench sets Hi Dennis, i,m interested in a crank handle and lug wrench only as i have jack, let me know if you got that seperate from your sets Thanks Lloyd __________________ 72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach

07-01-2010, 11:01 PM	#13
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Factory jack, crank, and lug wrench sets Hi Lloyd, can do. Shipped to Canada? Thanks, Sharpie

07-01-2010, 11:16 PM	#14
driller35 Senior Member Join Date: Aug 2009 Location: Calgary,AB Posts: 323	Re: Factory jack, crank, and lug wrench sets Yes, ship to T2W 1K8, no rush for it Thanks __________________ 72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach

07-05-2010, 09:51 AM	#15
Jobe72 Registered User Join Date: Mar 2010 Location: Austin, TX Posts: 299	Re: Factory jack, crank, and lug wrench sets Any chance you got to measure the 3/4 ton wrench? if it's 7/8" I'm interested. thanks. __________________ 1972 GMC Sierra LWB (Aquafresh) 1962 Cadillac Convertible 1962 Cadillac Sedan project



Register or Log In To remove these advertisements.

07-05-2010, 02:40 PM	#16
67 chevy heaven Registered User Join Date: Jul 2009 Location: york, SC Posts: 223	Re: Factory jack, crank, and lug wrench sets Dennis, I have not picked out my lug-nuts. However I know that I will want and need a Good set-up. Can you set me one aside and I will know the dia. by then. Shawn

07-05-2010, 04:05 PM	#17
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Factory jack, crank, and lug wrench sets Jobe: I'll check for you. Shawn: Can do! Thanks, Shrpie

08-05-2010, 05:59 PM	#18
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Factory jack, crank, and lug wrench sets Pics for 67 Chevy Heaven. I have a few 1/2 ton sets left after this one. Thanks, Sharpie Attached Images

08-05-2010, 06:11 PM	#19
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Factory jack, crank, and lug wrench sets Sharpie can you post a pic of what the Blazer setup would look like? I know I still have my spring for it, but can't remember if I have the right jack and handle. Thanks. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

08-05-2010, 06:19 PM	#20
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Factory jack, crank, and lug wrench sets Here are some pics of the Blazer jack equipment I have compared to the truck. The lug wrench and crank I have are both shorter for the Blazer, same jack. Maybe some of the Blazer experts can tell us if these are correct and specific to the Blazer or just what came with mine. Thanks, Sharpie Attached Images

08-05-2010, 06:54 PM	#22
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Factory jack, crank, and lug wrench sets $35 shipped. Thanks, Sharpie

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.