drop spindle HELP!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ANDREW · 07-03-2010, 10:06 PM

ok guys so i have a 1983 chevy c20 i need some drop spindles that are 2" drop
will these work

it says 2500 is that the same as my 3/4 ton c20

http://cgi.ebay.com/ebaymotors/2-1-2...cessories#shId

staggerd86c-10 · 07-03-2010, 10:09 PM

I hope they do work out cause thats a really good deal. I think those spindles go for about 350.

ANDREW · 07-03-2010, 10:12 PM

i know i mean i just wanna make sure and im hitting buy it now i needa fix my truck... im sick of the spring shaking

SOMEBODY PLEASE TELL ME THEYLL WORK

ANDREW · 07-04-2010, 12:49 AM

Anyone know

Dapper Dan · 07-04-2010, 10:40 AM

Sorry I don't know. Have you tried contacting the seller and asking for the numbers on the spindle, then you could double check on the web?

SCOTI · 07-04-2010, 02:25 PM

1/2 ton & 3/4 ton spindles are different for 73-87's. That add states "for 1500-2500 series". I would contact them for a p/n & google the p/n for additional info.

ANDREW · 07-04-2010, 07:41 PM

tryed but no responce

SCOTI · 07-05-2010, 12:59 AM

Quote:

Originally Posted by ANDREW

tryed but no responce

If you can't reach them to ask questions, what would you get if there's a problem?

joe231 · 07-05-2010, 01:17 AM

, I would pass...

ANDREW · 07-05-2010, 03:11 AM

hey joe231 are thoes for 3/4 ton trucks too

gchemist · 07-05-2010, 04:07 AM

Measure your rotor. If it is 1.25" thick, yes they fit.

**lolife99** · 07-05-2010, 08:39 AM

Aren't we talking C20 8-lug drop spindles?

I would stick with Belltech or Western Chassis (which CPP sells), McGaughys, or DJM.
Look at Summit Racing's brand, also.
I would buy from a reputable company.

**N2TRUX** · 07-05-2010, 10:11 AM

Quote:

Originally Posted by lolife99

Aren't we talking C20 8-lug drop spindles?.

Yes we are, and NO those will not fit your C-20. The ad should not include the 2500 part, as it is misleading.

joe231 · 07-05-2010, 10:40 AM

Oh, sorry guys
I mis-read
Dis-regard my previous post!

ANDREW · 07-05-2010, 02:05 PM

i found some for my truck but there 3" i was going to get a 2" and cut one coil for a total of 4" but if i buy the 3" i would have to buy a 1" drop coil along with it

**N2TRUX** · 07-05-2010, 04:41 PM

Or you could buy the 3" and cut half a coil. I'm not sure what size tire you plan to run, but a full coil might work...

joe231 · 07-05-2010, 04:59 PM

Quote:

Originally Posted by N2TRUX

Or you could buy the 3" and cut half a coil. I'm not sure what size tire you plan to run, but a full coil might work...

yeah,
what he said

ANDREW · 07-05-2010, 10:54 PM

what do you guys think on these
http://store.kreepinkustumz.net/19chc2losp3d1.html

joe231 · 07-05-2010, 11:10 PM

That's a heck of a price....
I wonder what brand they are?

Wilsonatv · 07-05-2010, 11:21 PM

Seems pretty legit. The about us is a little sketchy but it could just be because they seem to have just started the site.

SCOTI · 07-06-2010, 10:39 AM

Refunds = 20% restocking fee and/or in-store credit only.

ANDREW · 07-06-2010, 02:29 PM

so what do you guys think go for it

SCOTI · 07-06-2010, 03:23 PM

Dont ask us.... ask them. Call & confirm they have exactly what you need. If so, then yes that's a great price. The ad indicates C20-C35 3" drop spindles. Confirm the info & manufacturer of the spindles.

Wilsonatv · 07-06-2010, 03:24 PM

Go for it man. If it goes right Im gonna order spindles also.

ANDREW · 07-06-2010, 04:22 PM

ok guys gave them a call he said it will work for the c20 and the brand name is aim industires?

07-03-2010, 10:06 PM	#1
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	drop spindle HELP!! ok guys so i have a 1983 chevy c20 i need some drop spindles that are 2" drop will these work it says 2500 is that the same as my 3/4 ton c20 http://cgi.ebay.com/ebaymotors/2-1-2...cessories#shId

07-03-2010, 10:09 PM	#2
staggerd86c-10 Squarebody Aficionado Join Date: May 2008 Location: Miami, FL Posts: 713	Re: drop spindle HELP!! I hope they do work out cause thats a really good deal. I think those spindles go for about 350.

07-03-2010, 10:12 PM	#3
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! i know i mean i just wanna make sure and im hitting buy it now i needa fix my truck... im sick of the spring shaking SOMEBODY PLEASE TELL ME THEYLL WORK Last edited by ANDREW; 07-03-2010 at 10:14 PM.

07-04-2010, 12:49 AM	#4
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! Anyone know

07-04-2010, 10:40 AM	#5
Dapper Dan Registered User Join Date: Mar 2009 Location: Middle River, MD Posts: 171	Re: drop spindle HELP!! Sorry I don't know. Have you tried contacting the seller and asking for the numbers on the spindle, then you could double check on the web?

07-04-2010, 02:25 PM	#6
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: drop spindle HELP!! 1/2 ton & 3/4 ton spindles are different for 73-87's. That add states "for 1500-2500 series". I would contact them for a p/n & google the p/n for additional info. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-04-2010, 07:41 PM	#7
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! tryed but no responce

07-05-2010, 01:17 AM	#9
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: drop spindle HELP!! , I would pass... __________________ *CHEVY ONLY* Last edited by joe231; 07-05-2010 at 10:41 AM.

07-05-2010, 03:11 AM	#10
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! hey joe231 are thoes for 3/4 ton trucks too

07-05-2010, 04:07 AM	#11
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: drop spindle HELP!! Measure your rotor. If it is 1.25" thick, yes they fit. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

07-05-2010, 08:39 AM	#12
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: drop spindle HELP!! Aren't we talking C20 8-lug drop spindles? I would stick with Belltech or Western Chassis (which CPP sells), McGaughys, or DJM. Look at Summit Racing's brand, also. I would buy from a reputable company. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 07-05-2010 at 08:40 AM.

07-05-2010, 10:40 AM	#14
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: drop spindle HELP!! Oh, sorry guys I mis-read Dis-regard my previous post! __________________ *CHEVY ONLY*

07-05-2010, 02:05 PM	#15
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! i found some for my truck but there 3" i was going to get a 2" and cut one coil for a total of 4" but if i buy the 3" i would have to buy a 1" drop coil along with it

07-05-2010, 04:41 PM	#16
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: drop spindle HELP!! Or you could buy the 3" and cut half a coil. I'm not sure what size tire you plan to run, but a full coil might work... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

07-05-2010, 10:54 PM	#18
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! what do you guys think on these http://store.kreepinkustumz.net/19chc2losp3d1.html



Register or Log In To remove these advertisements.

07-05-2010, 11:10 PM	#19
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: drop spindle HELP!! That's a heck of a price.... I wonder what brand they are? __________________ *CHEVY ONLY*

07-05-2010, 11:21 PM	#20
Wilsonatv Registered User Join Date: Jun 2010 Location: Vegas Posts: 19	Re: drop spindle HELP!! Seems pretty legit. The about us is a little sketchy but it could just be because they seem to have just started the site.

07-06-2010, 10:39 AM	#21
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: drop spindle HELP!! Refunds = 20% restocking fee and/or in-store credit only. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-06-2010, 02:29 PM	#22
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! so what do you guys think go for it

07-06-2010, 03:23 PM	#23
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: drop spindle HELP!! Dont ask us.... ask them. Call & confirm they have exactly what you need. If so, then yes that's a great price. The ad indicates C20-C35 3" drop spindles. Confirm the info & manufacturer of the spindles. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-06-2010, 03:24 PM	#24
Wilsonatv Registered User Join Date: Jun 2010 Location: Vegas Posts: 19	Re: drop spindle HELP!! Go for it man. If it goes right Im gonna order spindles also.

07-06-2010, 04:22 PM	#25
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! ok guys gave them a call he said it will work for the c20 and the brand name is aim industires?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.