![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Jan 2009
Location: Havelock, NC.
Posts: 497
|
FS/FT SWB, 5 lug frame.
Okay a few months back I bought this frame from a fellow board member with the intention of using the five-lug stuff on another project. As projects go, I fell into other parts which have changed my course. So back on the market she goes. This is a 71 or 72 SWB frame with a five lug rear and front disc. The frame looks very good, no rust between the rails at the stiffeners and rear cross member; the frame horns also look unmolested as well. The trailing arms look good, no evidence of rust between the sides. It has a power steering box that has been covered or plugged and should be useable. It has all of the brake lines are still intact and attached to the port valve and master cyl. I have good luck selling 5 lug stuff here for almost what I’m asking for this as a roller. I thought I’d put it back on the board before selling it as parts. I would like to get $400.00 for it where it is. I am willing to trade up or down. Dasani
Last edited by Dasani; 07-13-2010 at 05:39 PM. |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Jan 2009
Location: Havelock, NC.
Posts: 497
|
Re: FS/FT SWB, 5 lug frame.
More pics
|
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Jan 2009
Location: Havelock, NC.
Posts: 497
|
Re: FS/FT SWB, 5 lug frame.
Pics
|
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Jan 2009
Location: Havelock, NC.
Posts: 497
|
Re: FS/FT SWB, 5 lug frame.
|
![]() |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Jan 2009
Location: Havelock, NC.
Posts: 497
|
Re: FS/FT SWB, 5 lug frame.
Ttt
__________________
68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver! |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: Jan 2009
Location: Havelock, NC.
Posts: 497
|
Re: FS/FT SWB, 5 lug frame.
Bump
__________________
68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver! |
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Jan 2009
Location: Havelock, NC.
Posts: 497
|
Re: FS/FT SWB, 5 lug frame.
Ttt
__________________
68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver! |
![]() |
![]() |
![]() |
#8 |
Registered User
![]() Join Date: Jun 2010
Location: Clemmons, North Carolina
Posts: 13
|
Re: FS/FT SWB, 5 lug frame.
Hey man, where are you located, I am in Winston-Salem and would be interested in the frame as is.
|
![]() |
![]() |
![]() |
#9 |
Registered User
![]() Join Date: Jan 2009
Location: Havelock, NC.
Posts: 497
|
Re: FS/FT SWB, 5 lug frame.
Havelock, about two hours east of 95, on 70 between New Bern and Morehead City.
__________________
68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver! |
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: Jan 2009
Location: Havelock, NC.
Posts: 497
|
Re: FS/FT SWB, 5 lug frame.
Bump
__________________
68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver! |
![]() |
![]() |
![]() |
#11 |
Registered User
![]() Join Date: Jan 2009
Location: Havelock, NC.
Posts: 497
|
Re: FS/FT SWB, 5 lug frame.
In two weeks I'm going to pull this one apart. Please don't post here for parts yet, I think I have a local guy wants the front end. This is a nice clean frame however and the trailing arms are nice too.
__________________
68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver! |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Feb 2008
Location: Richmond VA
Posts: 670
|
Re: FS/FT SWB, 5 lug frame.
Put me in line. Does it have a trans crossmember? Do you know what gear is in the rear?
How long before you need it moved? I'm on call the next couple weeks and wont be able to get down there right away. |
![]() |
![]() |
![]() |
#13 |
Registered User
![]() Join Date: Jan 2009
Location: Havelock, NC.
Posts: 497
|
Re: FS/FT SWB, 5 lug frame.
2manyprojects, as it stands you are #1 in line, had a local guy ask for the front 5 lug stuff but, I'm holding out for a bit (it is worth more in parts).
It does not have a trans crosmember, nor does it have engine stands. I haven't checked the gears, I'll check one day this week and let you know. Leaving it where it is for a couple of weeks would be no problem and if our schedules work I could bring it to I-95 exit 95(NC) for you for the cost of gas, which would knock four hours off your trip. Tom
__________________
68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver! |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Feb 2008
Location: Richmond VA
Posts: 670
|
Re: FS/FT SWB, 5 lug frame.
PM sent
|
![]() |
![]() |
![]() |
#15 |
Registered User
![]() Join Date: Jan 2009
Location: Havelock, NC.
Posts: 497
|
![]()
__________________
68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver! |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Feb 2008
Location: Richmond VA
Posts: 670
|
Re: FS/FT SWB, 5 lug frame.
I'll take it. The date and gas money amount works for me. I'll let you know if I think of anything else I need. The plan is to put the 67 on it eventually.
|
![]() |
![]() |
![]() |
#17 |
Registered User
![]() Join Date: Jan 2009
Location: Havelock, NC.
Posts: 497
|
Re: FS/FT SWB, 5 lug frame.
See you on the 24th, meet you in Smithfield at the Outlet Mall Just off 95.
How early? I'll be going West to pick up parts.
__________________
68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver! Last edited by Dasani; 07-20-2010 at 08:07 PM. |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Feb 2008
Location: Richmond VA
Posts: 670
|
Re: FS/FT SWB, 5 lug frame.
I just want to make sure we are on the same page. You said Saturday in your PM that is the 24th, Sunday is the 25th. Either day is ok with me. I can be there any time tell me what works for you?
|
![]() |
![]() |
![]() |
#19 |
Registered User
![]() Join Date: Jan 2009
Location: Havelock, NC.
Posts: 497
|
Re: FS/FT SWB, 5 lug frame.
Sorry, the 24th how about 9 A? It is about a 2 hour drive for me.
Tom
__________________
68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver! |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Feb 2008
Location: Richmond VA
Posts: 670
|
Re: FS/FT SWB, 5 lug frame.
|
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Feb 2008
Location: Richmond VA
Posts: 670
|
Re: FS/FT SWB, 5 lug frame.
Just letting you know I'm still on for Saturday. Where do you want to meet at the outlet mall?
PM sent with my # |
![]() |
![]() |
![]() |
#22 |
Registered User
![]() Join Date: Jan 2009
Location: Havelock, NC.
Posts: 497
|
Re: FS/FT SWB, 5 lug frame.
PMed same, yes sir, we are still on! I'm leaving here about 6:30, will be in the truck or in Cracker Barrel if you don't see me call. Tom
__________________
68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver! |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Feb 2008
Location: Richmond VA
Posts: 670
|
Re: FS/FT SWB, 5 lug frame.
OK see you tomorrow
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|