Truck's sittin' a little crooked - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cruisin' Oklahoma · 07-11-2010, 11:15 PM

So, I've noticed when my truck is sitting on flat that it seems to sit up a little high at the back of the cab. The gap between the bed and the cab is smaller at bottom than at top by a little bit...I'm going to post one pic now and will post another tomorrow to get a better pic. I just can't exactly figure out the best way to fix a problem like this...Not a big deal, just gets on my nerves. I think it could be a body mount issue on it, what do you guys think?

1968CHEVYC10 · 07-11-2010, 11:51 PM

I never would have noticed if you hadn't mentioned it, but I can def see what your talking about. My guess would be the cab mounts, but idk maybe someone dropped a heavy load on the back of the bed.

67ChevyRedneck · 07-11-2010, 11:57 PM

If the cab mounts are fine, I would just add spacers (big flat washers) between the frame and bed at the back if it really bothers you that much

pat 70/71 · 07-12-2010, 12:11 AM

I don't think the bed is bent. I think maybe it needs a little shimming down @ the front/ up @ the back and while your there, check the cab mounts maybe po used the wrong size @ the back? anyway my stepper bed sits on the frame and has no shims at all. you will figure this one out just take your time and be as systematic as you can& look at the big picture cheers, Pat

RossRinSD · 07-12-2010, 05:25 AM

Or the whole frame is bent. I tweaked my truck by running one tire up on an angled retaining wall to see how much the suspension would flex. The bed rubs on the back of the cab all the time now.

cdowns · 07-12-2010, 06:24 AM

after 40years its not unusual for a work truck to have a bit of a tweak in it// i'd do as suggested and just shim the rear of the bed a bit

Cruisin' Oklahoma · 07-12-2010, 09:40 PM

Thanks for the replies guys! I'll give it a try and see what I find....

07-11-2010, 11:15 PM	#1
Cruisin' Oklahoma Registered User Join Date: May 2010 Location: Skiatook, Oklahoma Posts: 27	Truck's sittin' a little crooked So, I've noticed when my truck is sitting on flat that it seems to sit up a little high at the back of the cab. The gap between the bed and the cab is smaller at bottom than at top by a little bit...I'm going to post one pic now and will post another tomorrow to get a better pic. I just can't exactly figure out the best way to fix a problem like this...Not a big deal, just gets on my nerves. I think it could be a body mount issue on it, what do you guys think? Attached Images

07-11-2010, 11:51 PM	#2
1968CHEVYC10 Registered User Join Date: Aug 2009 Location: Tomball, TX Posts: 578	Re: Truck's sittin' a little crooked I never would have noticed if you hadn't mentioned it, but I can def see what your talking about. My guess would be the cab mounts, but idk maybe someone dropped a heavy load on the back of the bed. __________________ '68 C10 LWB 6.2NA/NP833 3.73's

07-11-2010, 11:57 PM	#3
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Truck's sittin' a little crooked If the cab mounts are fine, I would just add spacers (big flat washers) between the frame and bed at the back if it really bothers you that much __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-12-2010, 12:11 AM	#4
pat 70/71 Registered User Join Date: Nov 2009 Location: newbury park california Posts: 1,038	Re: Truck's sittin' a little crooked I don't think the bed is bent. I think maybe it needs a little shimming down @ the front/ up @ the back and while your there, check the cab mounts maybe po used the wrong size @ the back? anyway my stepper bed sits on the frame and has no shims at all. you will figure this one out just take your time and be as systematic as you can& look at the big picture cheers, Pat

07-12-2010, 05:25 AM	#5
RossRinSD Registered User Join Date: Feb 2010 Location: Fallbrook, CA Posts: 98	Re: Truck's sittin' a little crooked Or the whole frame is bent. I tweaked my truck by running one tire up on an angled retaining wall to see how much the suspension would flex. The bed rubs on the back of the cab all the time now.

07-12-2010, 06:24 AM	#6
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Truck's sittin' a little crooked after 40years its not unusual for a work truck to have a bit of a tweak in it// i'd do as suggested and just shim the rear of the bed a bit __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

07-12-2010, 09:40 PM	#7
Cruisin' Oklahoma Registered User Join Date: May 2010 Location: Skiatook, Oklahoma Posts: 27	Re: Truck's sittin' a little crooked Thanks for the replies guys! I'll give it a try and see what I find.... __________________ 69' Stepside, 350SB/TH350, Holley 600 4 Barrel, Headers, Edelbrock Intake, Valve Covers, and Breather, 275/60 R15's, Disc Brake conversion. "For we know that God works all things for the good of those that love Him, to those that are called according to His purpose." --Romans 8:28

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.