WY Heat riser tube and manifold cover. Small block. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 08-05-2010, 08:28 PM

Very clean set-up. I took the best from 3 sets to put this package together. Thanks to Field & Son for the rear cover, I had been looking for one for quite awhile. Tube was in excellent original condition, steel wooled, primed and painted gloss black. Manifold covers are solid with no rot or bends. Media blasted and sprayed in primer, ready for your choice of high temp. paint.
$95 shipped. Please reply in thread. Thanks, Sharpie

**D.PASSMORE** · 08-05-2010, 08:43 PM

Is it thin anywhere on the manifold sheilds? Are any of the mounting holes (screws) streched out beyond the original diameter? I would like to use original size screws. Intrested. Thanks

*sharpie1972* · 08-05-2010, 08:47 PM

Hi David, thickness looks good everywhere and screw holes all look to be correct size. 100% satisfaction guarantee, if you don't like it ship it back at my cost!
Thanks, Sharpie

**D.PASSMORE** · 08-05-2010, 09:09 PM

Good to know you back your parts. I guess the last question would be: do you think it will fit around a 2 1/2" straight dump GM manifold? It looks like it has a slight bend for a 2WD manifold.

*sharpie1972* · 08-05-2010, 09:36 PM

Hi David, it fits my 4x4 straight dump manifold fine. Thanks, Sharpie

**72 Super** · 08-05-2010, 09:51 PM

Hi Sharpie, If David Passes I will get in line.

Thanks,
Ray

**D.PASSMORE** · 08-05-2010, 10:04 PM

Sounds good, I'll take it. My concern is the bottom fitting around a 2 1/2 " manifold outlet.
PP or MO?
Thanks David

*sharpie1972* · 08-05-2010, 10:06 PM

Hi David, do you have an O.D. measurement on your manifold? The shield measures 3" without tweaking it. Thanks, Sharpie

**D.PASSMORE** · 08-05-2010, 10:41 PM

I don't - I'm away from the house until the end of the month.

*sharpie1972* · 08-05-2010, 11:05 PM

Hi David, I'll leave it up to you. 2 1/2" straight dump might be a strech for a stock turn back cover. Thanks, Sharpie

**jaros44sr** · 08-06-2010, 12:14 AM

Quote:

Originally Posted by D.PASSMORE

I don't - I'm away from the house until the end of the month.

I've got 2 1/2" center dump ramshorn if you need a demension David

**D.PASSMORE** · 08-06-2010, 07:51 AM

I'll take it. I believe I have a extra outer shield laying around. I could modify if needed. I didn't care to run a AM air breather on this truck.
PP or MO?
Thanks Jaros for the offer.

*sharpie1972* · 08-06-2010, 08:15 AM

Hi David, Paypal is fine. denscustom1@hotmail.com
Thanks, Sharpie

08-05-2010, 08:28 PM	#1
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Heat riser tube and manifold cover. Small block. Very clean set-up. I took the best from 3 sets to put this package together. Thanks to Field & Son for the rear cover, I had been looking for one for quite awhile. Tube was in excellent original condition, steel wooled, primed and painted gloss black. Manifold covers are solid with no rot or bends. Media blasted and sprayed in primer, ready for your choice of high temp. paint. $95 shipped. Please reply in thread. Thanks, Sharpie Attached Images

08-05-2010, 08:43 PM	#2
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Heat riser tube and manifold cover. Small block. Is it thin anywhere on the manifold sheilds? Are any of the mounting holes (screws) streched out beyond the original diameter? I would like to use original size screws. Intrested. Thanks __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

08-05-2010, 08:47 PM	#3
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Heat riser tube and manifold cover. Small block. Hi David, thickness looks good everywhere and screw holes all look to be correct size. 100% satisfaction guarantee, if you don't like it ship it back at my cost! Thanks, Sharpie

08-05-2010, 09:09 PM	#4
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Heat riser tube and manifold cover. Small block. Good to know you back your parts. I guess the last question would be: do you think it will fit around a 2 1/2" straight dump GM manifold? It looks like it has a slight bend for a 2WD manifold.

08-05-2010, 09:36 PM	#5
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Heat riser tube and manifold cover. Small block. Hi David, it fits my 4x4 straight dump manifold fine. Thanks, Sharpie

08-05-2010, 09:51 PM	#6
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,693	Re: Heat riser tube and manifold cover. Small block. Hi Sharpie, If David Passes I will get in line. Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

08-05-2010, 10:04 PM	#7
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Heat riser tube and manifold cover. Small block. Sounds good, I'll take it. My concern is the bottom fitting around a 2 1/2 " manifold outlet. PP or MO? Thanks David

08-05-2010, 10:06 PM	#8
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Heat riser tube and manifold cover. Small block. Hi David, do you have an O.D. measurement on your manifold? The shield measures 3" without tweaking it. Thanks, Sharpie

08-05-2010, 10:41 PM	#9
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Heat riser tube and manifold cover. Small block. I don't - I'm away from the house until the end of the month.

08-05-2010, 11:05 PM	#10
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Heat riser tube and manifold cover. Small block. Hi David, I'll leave it up to you. 2 1/2" straight dump might be a strech for a stock turn back cover. Thanks, Sharpie

08-06-2010, 07:51 AM	#12
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Heat riser tube and manifold cover. Small block. I'll take it. I believe I have a extra outer shield laying around. I could modify if needed. I didn't care to run a AM air breather on this truck. PP or MO? Thanks Jaros for the offer.

08-06-2010, 08:15 AM	#13
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Heat riser tube and manifold cover. Small block. Hi David, Paypal is fine. denscustom1@hotmail.com Thanks, Sharpie

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.