VA some parts with lower prices for 1 week f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 08-24-2010, 03:55 AM

my photo bucket is not working right as of today. i qm trying to fix. most of the parts are f,s in some my other treads you may be able to look up pic.s that way till i can get them working again.there is several nice parts that i am marking down for 1 week to rasie a little money,
heres a list
the red stepside fendersthat was on my project truck ground pounder they are about a 8 1/2 out of 10 very good griver shape. they do have a few scratches & a few very small dings lips where the bolt to box are also very nice left & right fenders only $400.00 that is what i paid for them to use on my truck and then i found a fleet bed for my truck. you can't buy 1 of these from lmc for the price of both of these. shipping would be high on these & would probley kill the deal. so i perfer local pickup.
[see more pic.s of fenders on down in the tread.]

billsbowtie · 08-24-2010, 03:58 AM

nice newly upposted black seat don't think it has ever been set in $200.00 i don't think you can get 1 redone for that price . i think this 1 cost $225.00 to $250.00 when it was done.it's black.
[SOLD]

billsbowtie · 08-24-2010, 04:00 AM

1 pair of utility buckets need redone brackets come with them $100.00.[SOLD]

billsbowtie · 08-24-2010, 04:02 AM

72 bench needs recovering its white with hound tooth pat. $50.00.[SOLD]

billsbowtie · 08-24-2010, 04:03 AM

new hounds tooth seat cover great shape $250.00 shipped.white & black.[SOLD]

billsbowtie · 08-24-2010, 04:05 AM

np 205 adapter came off of a 72 blazer with 350 trans $80.00 shipped.[SOLD]

billsbowtie · 08-24-2010, 04:06 AM

ft drive shaft out of a 72 blazer $80.00 shipped.

billsbowtie · 08-24-2010, 04:08 AM

sway bar & brackets off of a 72 3/4 ton i think it is the 1" bar $65.00 shipped.

billsbowtie · 08-24-2010, 04:10 AM

72 blazer v8 eng cross member $60.00 shipped.

billsbowtie · 08-24-2010, 04:11 AM

72 blazer auto trans cross member 4wd $65.00 shipped.

billsbowtie · 08-24-2010, 04:12 AM

2wd auto trans. cross member $55.00 shipped.

billsbowtie · 08-24-2010, 04:16 AM

these are a few good parts i would like to move out of my way so i have marked down the prices for 1 week and then i will removed tread. if you look threw my other parts treads you will see pic.s of most of these parts.
i more thing i have a almost rust pass side door for $175.00 this week.

Sammy · 08-24-2010, 10:21 AM

Wht n Black Houndstooth seat cover...Searched for pics but even your prior post all show moved or deleted. Will check back later today to see if you get pics up n running.

billsbowtie · 08-24-2010, 01:19 PM

sammy i moved the tread on the seat cover to the top . i can see the pic.s on it let me know if you can see them. my computer is on it's last legs.

Sammy · 08-24-2010, 02:18 PM

Got it. I can see it just fine. I am scared to death of all that white. Beautiful when clean but it would require me to drive my truck in the buff where ever I went. Thanks. Good luck getting ur puter lined out.

billsbowtie · 09-05-2010, 10:48 PM

pic.s of 68/72 bed fenders.[SOLD]

billsbowtie · 09-05-2010, 10:48 PM

billsbowtie · 09-05-2010, 11:18 PM

billsbowtie · 09-05-2010, 11:18 PM

billsbowtie · 09-05-2010, 11:19 PM

Booya · 10-05-2010, 03:29 PM

Quote:

Originally Posted by billsbowtie

np 205 adapter came off of a 72 blazer with 350 trans $80.00 shipped.

Bill, Do you still have this TH350 NP205 Adapter? I'm assuming it's in good condition and with or without the sleeve?

Thanks
Bill

billsbowtie · 10-05-2010, 09:09 PM

i still have it. it looks in good shape i am not sure about the sleeve. i will try to post a pic. of it.

billsbowtie · 10-05-2010, 09:54 PM

pic. of adapter.

billsbowtie · 10-05-2010, 09:58 PM

Booya · 10-05-2010, 11:04 PM

PM sent

08-24-2010, 03:55 AM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	some parts with lower prices for 1 week f/s my photo bucket is not working right as of today. i qm trying to fix. most of the parts are f,s in some my other treads you may be able to look up pic.s that way till i can get them working again.there is several nice parts that i am marking down for 1 week to rasie a little money, heres a list the red stepside fendersthat was on my project truck ground pounder they are about a 8 1/2 out of 10 very good griver shape. they do have a few scratches & a few very small dings lips where the bolt to box are also very nice left & right fenders only $400.00 that is what i paid for them to use on my truck and then i found a fleet bed for my truck. you can't buy 1 of these from lmc for the price of both of these. shipping would be high on these & would probley kill the deal. so i perfer local pickup. [see more pic.s of fenders on down in the tread.] __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 09-05-2010 at 11:17 PM.

08-24-2010, 03:58 AM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s nice newly upposted black seat don't think it has ever been set in $200.00 i don't think you can get 1 redone for that price . i think this 1 cost $225.00 to $250.00 when it was done.it's black. [SOLD] __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 10-12-2010 at 01:13 AM.

08-24-2010, 04:00 AM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s 1 pair of utility buckets need redone brackets come with them $100.00.[SOLD] __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 10-12-2010 at 01:13 AM.

08-24-2010, 04:02 AM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s 72 bench needs recovering its white with hound tooth pat. $50.00.[SOLD] __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 10-12-2010 at 01:14 AM.

08-24-2010, 04:03 AM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s new hounds tooth seat cover great shape $250.00 shipped.white & black.[SOLD] __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 10-12-2010 at 01:14 AM.

08-24-2010, 04:05 AM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s np 205 adapter came off of a 72 blazer with 350 trans $80.00 shipped.[SOLD] __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 10-12-2010 at 01:16 AM.

08-24-2010, 04:06 AM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s ft drive shaft out of a 72 blazer $80.00 shipped. __________________ i have 67/72 chevy truck parts f/s.

08-24-2010, 04:08 AM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s sway bar & brackets off of a 72 3/4 ton i think it is the 1" bar $65.00 shipped. __________________ i have 67/72 chevy truck parts f/s.

08-24-2010, 04:10 AM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s 72 blazer v8 eng cross member $60.00 shipped. __________________ i have 67/72 chevy truck parts f/s.

08-24-2010, 04:11 AM	#10
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s 72 blazer auto trans cross member 4wd $65.00 shipped. __________________ i have 67/72 chevy truck parts f/s.

08-24-2010, 04:12 AM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s 2wd auto trans. cross member $55.00 shipped. __________________ i have 67/72 chevy truck parts f/s.

08-24-2010, 04:16 AM	#12
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s these are a few good parts i would like to move out of my way so i have marked down the prices for 1 week and then i will removed tread. if you look threw my other parts treads you will see pic.s of most of these parts. i more thing i have a almost rust pass side door for $175.00 this week. __________________ i have 67/72 chevy truck parts f/s.

08-24-2010, 10:21 AM	#13
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: some parts with lower prices for 1 week f/s Wht n Black Houndstooth seat cover...Searched for pics but even your prior post all show moved or deleted. Will check back later today to see if you get pics up n running. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

08-24-2010, 01:19 PM	#14
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s sammy i moved the tread on the seat cover to the top . i can see the pic.s on it let me know if you can see them. my computer is on it's last legs. __________________ i have 67/72 chevy truck parts f/s.

08-24-2010, 02:18 PM	#15
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: some parts with lower prices for 1 week f/s Got it. I can see it just fine. I am scared to death of all that white. Beautiful when clean but it would require me to drive my truck in the buff where ever I went. Thanks. Good luck getting ur puter lined out. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"



Register or Log In To remove these advertisements.

09-05-2010, 10:48 PM	#16
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s pic.s of 68/72 bed fenders.[SOLD] __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 10-12-2010 at 01:19 AM.

09-05-2010, 11:18 PM	#18
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s __________________ i have 67/72 chevy truck parts f/s.

09-05-2010, 11:19 PM	#20
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s __________________ i have 67/72 chevy truck parts f/s.

10-05-2010, 09:09 PM	#22
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s i still have it. it looks in good shape i am not sure about the sleeve. i will try to post a pic. of it. __________________ i have 67/72 chevy truck parts f/s.

10-05-2010, 09:54 PM	#23
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s pic. of adapter. __________________ i have 67/72 chevy truck parts f/s.

10-05-2010, 09:58 PM	#24
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: some parts with lower prices for 1 week f/s __________________ i have 67/72 chevy truck parts f/s.

10-05-2010, 11:04 PM	#25
Booya Registered User Join Date: Jun 2008 Location: Boise Idaho Posts: 117	Re: some parts with lower prices for 1 week f/s PM sent

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.