IL Engine Crossmember- DIY4x

[1949gmc]

1969-1972 engine crossmember from DIY4x. Bought it last January for my truck, then decided I wasn't going to use it. Excellent quality piece, wish I could use it. $175 shipped.

[70cst]

bump

[1949gmc]

back to page 1

[1949gmc]

NEW PRICE~ $175 shipped

[71blazerdetroit]

Interested, would you take 150.00? , paypal ok? shipped to 48047

[72k5zl1]

will it work with the ls motors?

[Thealien]

Originally Posted by 72k5zl1

will it work with the ls motors?

I was unable to use it in my LS swap into my Jimmy. I did use some of his parts and fabricated my own. I used his frame mounting points (c channel), the flat piece that bolts to that frame mounting point, and his engine mounts and polyurethane isolaters with the associated 2 inch sleeve. Had to make/weld my own crossmember to attach to those parts. There is some discussion and pictures if you search for my threads.

If you are going with at least a 4 inch lift Pacific Fabrication in CA has a nice motor mount/crossmember set up for about $400.

Kurts stuff is nice and he was willing to work with me a few times to try and help.

[1949gmc]

Originally Posted by Thealien

I was unable to use it in my LS swap into my Jimmy. I did use some of his parts and fabricated my own. I used his frame mounting points (c channel), the flat piece that bolts to that frame mounting point, and his engine mounts and polyurethane isolaters with the associated 2 inch sleeve. Had to make/weld my own crossmember to attach to those parts. There is some discussion and pictures if you search for my threads.

If you are going with at least a 4 inch lift Pacific Fabrication in CA has a nice motor mount/crossmember set up for about $400.

Kurts stuff is nice and he was willing to work with me a few times to try and help.

Thank you. That beats the crap out of my answer..... which was 'I don't know'.

[1949gmc]

sold