KS Misc parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*ksjh1316* · 09-03-2010, 10:29 PM

I have some parts I am not going to use and they are collecting dust in my garage UPDATED PRICES GOT TO GO

Woodgrain tach dash with new circuit board and tach harness orginal circuit board may still work didn't want to take a chance $225 shipped SOLD

67-68 Chevy Grill no rust one small dent as seen in the pics. Please no shipping $65 PENDING

71 GMC grill in great shape the black was repainted one dime size dent in center bar. Top bar still attached has a deep gouge in it from a drill it looks like don't know if it could be salvaged. Please no shipping $65 PENDING

GMC fire extingusher do not know status if it will hold a charge or what to do to check. $25 plus the ride PENDING

67-68 GMC hood latch $15 plus shipping

Weiand action intake for sb 350 non vortec bought bought from member 2 years ago only used fro engine break in. Unit is dusty I will clean before shipping as this has been on my shelf for the las two years. $75 shipped

NOS coolant resevor tank lid bought from Billsbowtie $15 shipped

6 cylinder fan shroud sticker containes 292 info $25 shipped

sb 350 motor mounts cleaned up primed and painted few scratches from storage $25 shipped

ps booster brackets master cylinder and proportioning valve bought from a menber $25 plus shipping

intake and quadrajet 4 barrel carb taken off of a 75 Chevy truck looks to have all carb linkage $25 I would rather not ship due to the weight.

I will try and answer all questions and can get better pics if needed. Please post in thread

*ksjh1316* · 09-03-2010, 10:32 PM

More pics

*ksjh1316* · 09-03-2010, 10:35 PM

Last one

**too much stuff** · 09-03-2010, 11:29 PM

Interested in the extinguisher if it can be shipped.

VA72C10 · 09-03-2010, 11:45 PM

I'll take the tach dash.

70LonghornCST · 09-03-2010, 11:56 PM

Thank goodness someone bought that tach. My finger was itching but my wallet was saying no. Congrats on a great deal!

*ksjh1316* · 09-04-2010, 09:05 AM

Quote:

Originally Posted by too much stuff

Interested in the extinguisher if it can be shipped.

It was shipped to me with no problem since it is discharged.

*ksjh1316* · 09-04-2010, 09:05 AM

Quote:

Originally Posted by VA72C10

I'll take the tach dash.

PM Sent

rich67 · 09-04-2010, 10:45 AM

if i purchase both grills, how soon they need to be picked up? thanx rich

*sharpie1972* · 09-04-2010, 10:52 AM

Quote:

Originally Posted by 70LonghornCST

Thank goodness someone bought that tach. My finger was itching but my wallet was saying no. Congrats on a great deal!

Finger itching? Heck my left hand was forcefully holding back my right hand! Great buy! Sharpie

70LonghornCST · 09-04-2010, 12:21 PM

Quote:

Originally Posted by sharpie1972

finger itching? Heck my left hand was forcefully holding back my right hand! Great buy! Sharpie

lol!
bump!

VA72C10 · 09-04-2010, 12:32 PM

Quote:

Originally Posted by 70LonghornCST

Thank goodness someone bought that tach. My finger was itching but my wallet was saying no. Congrats on a great deal!

Quote:

Originally Posted by sharpie1972

Finger itching? Heck my left hand was forcefully holding back my right hand! Great buy! Sharpie

Quote:

Originally Posted by 70LonghornCST

lol!
bump!

Thanks guys....I couldn't say no

**Thealien** · 09-04-2010, 01:04 PM

Next in line or I'll take it for the GMC fire extinguisher.

72shortstep · 09-04-2010, 01:59 PM

Is that power steering pump for sale? i would like more info on it if it is. thanks.

*ksjh1316* · 09-04-2010, 11:15 PM

Quote:

Originally Posted by rich67

if i purchase both grills, how soon they need to be picked up? thanx rich

Rich I will pm you my phone number and we can work it out

*ksjh1316* · 09-04-2010, 11:16 PM

Quote:

Originally Posted by 72shortstep

Is that power steering pump for sale? i would like more info on it if it is. thanks.

I believe it is for a 292 set up I am going to get it verified on the board I will put you first in line if you need it once I make sure

rich67 · 09-04-2010, 11:27 PM

awesome

**too much stuff** · 09-05-2010, 09:52 AM

PM sent on extinguisher. Eric

*ksjh1316* · 09-05-2010, 09:06 PM

TTT
Posted via Mobile Device

N2GMTrux · 09-05-2010, 09:38 PM

Put me second in line on the power steering pump,,, pending close up pictures..
Thanks
S.C.
Posted via Mobile Device

*ksjh1316* · 09-06-2010, 09:17 AM

Ttt

402GMC · 09-06-2010, 01:27 PM

is the extinguisher gone? if not i'll take it. thanks, scott

**D.PASSMORE** · 09-06-2010, 02:16 PM

Is the manifold a "Weiand 8121 Action Plus Intake Manifold"? Any threaded holes stripped out or had Heli coil inputted? Have you ever had the side - mating surfaces plained? Were you running a Q-Jet or Holley when in use. Why did you remove it from the motor you were breaking in? LMK, Intrested...

*ksjh1316* · 09-06-2010, 09:41 PM

Quote:

Originally Posted by 402GMC

is the extinguisher gone? if not i'll take it. thanks, scott

That item sold real fast

Quote:

Originally Posted by D.PASSMORE

Is the manifold a "Weiand 8121 Action Plus Intake Manifold"? Any threaded holes stripped out or had Heli coil inputted? Have you ever had the side - mating surfaces plained? Were you running a Q-Jet or Holley when in use. Why did you remove it from the motor you were breaking in? LMK, Intrested...

It is the 8004. I bought it from a member that had used it to break in his engine with an Eldebrock 1406 carb. He then went tbi right afterwords. I ended up chancing to vortec heads since it was discovered my heads needed rebuilt. There has been no alterations or damage to the intake. If you want I can take a shot of the back side.

72shortstep · 09-07-2010, 02:13 PM

Any news on the power steering set-up? thanks.

09-03-2010, 10:29 PM	#1
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Misc parts for sale I have some parts I am not going to use and they are collecting dust in my garage UPDATED PRICES GOT TO GO Woodgrain tach dash with new circuit board and tach harness orginal circuit board may still work didn't want to take a chance $225 shipped SOLD 67-68 Chevy Grill no rust one small dent as seen in the pics. Please no shipping $65 PENDING 71 GMC grill in great shape the black was repainted one dime size dent in center bar. Top bar still attached has a deep gouge in it from a drill it looks like don't know if it could be salvaged. Please no shipping $65 PENDING GMC fire extingusher do not know status if it will hold a charge or what to do to check. $25 plus the ride PENDING 67-68 GMC hood latch $15 plus shipping Weiand action intake for sb 350 non vortec bought bought from member 2 years ago only used fro engine break in. Unit is dusty I will clean before shipping as this has been on my shelf for the las two years. $75 shipped NOS coolant resevor tank lid bought from Billsbowtie $15 shipped 6 cylinder fan shroud sticker containes 292 info $25 shipped sb 350 motor mounts cleaned up primed and painted few scratches from storage $25 shipped ps booster brackets master cylinder and proportioning valve bought from a menber $25 plus shipping intake and quadrajet 4 barrel carb taken off of a 75 Chevy truck looks to have all carb linkage $25 I would rather not ship due to the weight. I will try and answer all questions and can get better pics if needed. Please post in thread Last edited by ksjh1316; 09-06-2010 at 09:16 AM.

09-03-2010, 10:32 PM	#2
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Misc parts for sale More pics

09-03-2010, 10:35 PM	#3
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Misc parts for sale Last one

09-03-2010, 11:29 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: Misc parts for sale Interested in the extinguisher if it can be shipped. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-03-2010, 11:45 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Misc parts for sale I'll take the tach dash. __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-03-2010, 11:56 PM	#6
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Misc parts for sale Thank goodness someone bought that tach. My finger was itching but my wallet was saying no. Congrats on a great deal! __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

09-04-2010, 10:45 AM	#9
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: Misc parts for sale if i purchase both grills, how soon they need to be picked up? thanx rich

09-04-2010, 01:04 PM	#13
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Misc parts for sale Next in line or I'll take it for the GMC fire extinguisher. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

09-04-2010, 01:59 PM	#14
72shortstep lovin' the lowcountry Join Date: Apr 2010 Location: Moncks Corner, SC Posts: 138	Re: Misc parts for sale Is that power steering pump for sale? i would like more info on it if it is. thanks. __________________ Chris 29461 72 SWB stepside 71 SWB stepside DRIVE IT LIKE YOU STOLE IT!

09-04-2010, 11:27 PM	#17
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: Misc parts for sale awesome

09-05-2010, 09:52 AM	#18
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: Misc parts for sale PM sent on extinguisher. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-05-2010, 09:06 PM	#19
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Misc parts for sale TTT Posted via Mobile Device

09-05-2010, 09:38 PM	#20
N2GMTrux Registered User Join Date: Jan 2007 Location: Fort Worth, TX 76133 Posts: 406	Re: Misc parts for sale Put me second in line on the power steering pump,,, pending close up pictures.. Thanks S.C. Posted via Mobile Device __________________ ...try'n to be a little! This is a great site. http://67-72chevytrucks.com/vboard/s...d.php?t=157669 http://www.67-72chevytrucks.com/vboa...d.php?t=375640

09-06-2010, 09:17 AM	#21
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Misc parts for sale Ttt

09-06-2010, 01:27 PM	#22
402GMC Registered User Join Date: May 2008 Location: RAPID CITY, SOUTH DAKOTA Posts: 411	Re: Misc parts for sale is the extinguisher gone? if not i'll take it. thanks, scott



Register or Log In To remove these advertisements.

09-06-2010, 02:16 PM	#23
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Misc parts for sale Is the manifold a "Weiand 8121 Action Plus Intake Manifold"? Any threaded holes stripped out or had Heli coil inputted? Have you ever had the side - mating surfaces plained? Were you running a Q-Jet or Holley when in use. Why did you remove it from the motor you were breaking in? LMK, Intrested... __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

09-07-2010, 02:13 PM	#25
72shortstep lovin' the lowcountry Join Date: Apr 2010 Location: Moncks Corner, SC Posts: 138	Re: Misc parts for sale Any news on the power steering set-up? thanks. __________________ Chris 29461 72 SWB stepside 71 SWB stepside DRIVE IT LIKE YOU STOLE IT!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.