Rear window crank/lock question. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Shaffer4 · 10-04-2010, 12:26 AM

Just picked up a '78 K5 (pics to come) and the rear window doesn't roll up, but the lock cylinder is missing. I was wondering if the roller doesn't work without the cylinder, as I know some of the older SUV and Wagon rear rollers have the "free" position.

68Timber · 10-04-2010, 12:47 AM

yep...

motornut · 10-05-2010, 07:54 AM

yup had to wire up a burb window till i got the parts......

48cj2a · 10-05-2010, 09:29 AM

Is it power? My Manual crank CUCV still works up and down without the cyl.

I just pulled a regulator and lock from a pwr Blazer, When I unsrewed the cable from the motor I was able to raise and lower the regulator by hand turning the cable with my fingers (glass was removed). A cordless drill may work with the window still attached to at least get it back up if thats what your after until you get a lock.

Anyone know if the lock is recodeable to a different key?

68Timber · 10-05-2010, 11:46 AM

I had to replace the lock cylinder on my rear window, I had a local locksmith fix it to match the door locks.

Shaffer4 · 10-06-2010, 01:14 AM

Manual Crank. Previous owner used it as a "pickup" plywood/plexiglass divider and all. Haven't had a chance to look into it, as I've been busy getting it road worthy.

10-04-2010, 12:26 AM	#1
Shaffer4 Strange Cousin From The West.. Join Date: Jul 2007 Location: Walla Walla, Wa Posts: 248	Rear window crank/lock question. Just picked up a '78 K5 (pics to come) and the rear window doesn't roll up, but the lock cylinder is missing. I was wondering if the roller doesn't work without the cylinder, as I know some of the older SUV and Wagon rear rollers have the "free" position. Last edited by Shaffer4; 10-04-2010 at 12:26 AM.

10-04-2010, 12:47 AM	#2
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Rear window crank/lock question. yep... __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

10-05-2010, 07:54 AM	#3
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Rear window crank/lock question. yup had to wire up a burb window till i got the parts...... __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

10-05-2010, 09:29 AM	#4
48cj2a Registered User Join Date: Feb 2010 Location: Central, IL Posts: 599	Re: Rear window crank/lock question. Is it power? My Manual crank CUCV still works up and down without the cyl. I just pulled a regulator and lock from a pwr Blazer, When I unsrewed the cable from the motor I was able to raise and lower the regulator by hand turning the cable with my fingers (glass was removed). A cordless drill may work with the window still attached to at least get it back up if thats what your after until you get a lock. Anyone know if the lock is recodeable to a different key? __________________ 03 Suburban Z71 Z71 98 GMC Yukon SLT 4x4 Yukon 86 M1009 CUCV Project Milverado 48 Willys CJ2A 48CJ2A

10-05-2010, 11:46 AM	#5
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Rear window crank/lock question. I had to replace the lock cylinder on my rear window, I had a local locksmith fix it to match the door locks. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

10-06-2010, 01:14 AM	#6
Shaffer4 Strange Cousin From The West.. Join Date: Jul 2007 Location: Walla Walla, Wa Posts: 248	Re: Rear window crank/lock question. Manual Crank. Previous owner used it as a "pickup" plywood/plexiglass divider and all. Haven't had a chance to look into it, as I've been busy getting it road worthy.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.