Started my first frame off - 72 SWB LS1, 6-spd manual - The 1947 - Present Chevrolet & GMC Truck Message Board Network

trkfrk · 10-05-2010, 07:35 PM

I'm new to the site and love it. I purchased my truck from Ebay about 3 years ago - an actual AZ truck with only surface rust. started on the tear down in August. here are few pictures - wish me luck..

Ed 72 Sierra Grande · 10-05-2010, 07:40 PM

Sweet Truck and nice garage. Keep us posted on your build.

Have the same parts washer, What kind of solvent do you use these days?

Good Luck

dmwphoto · 10-05-2010, 07:53 PM

that is going to be nice!

68 short step · 10-05-2010, 08:55 PM

nice, gotta love those az cars/trucks

jay6891 · 10-05-2010, 08:59 PM

It looks Killer!

I was thinking of that same combo, any thoughts on where or how that shifter is going to be inside. Guess running buckets is the only option.

Still looks Cool.... and Good Luck!

mjensen · 10-05-2010, 08:59 PM

You'll have to keep us posted. I would really love a 6-speed in mine, and have been wondering how big of a project it is.

**LEEVON** · 10-05-2010, 09:30 PM

Quote:

Originally Posted by jay6891

It looks Killer!

I was thinking of that same combo, any thoughts on where or how that shifter is going to be inside. Guess running buckets is the only option.

Still looks Cool.... and Good Luck!

There's a kit to move the shifter forward about 5-6 inches, somebody here did a great write-up on it.

Pop's C-10 · 10-05-2010, 09:50 PM

nice start

68GMCCustom · 10-05-2010, 10:11 PM

my 1st frame off too. I am also doing a genIV 6.0L carb'd LSx conversion but will be running a 200-4r

nyncompute · 10-05-2010, 11:30 PM

Fellow Las Vegas guy here. Show lots of pics of the build!. I would love to do one up like your doing. Good luck

mcmlxix · 10-06-2010, 08:39 AM

Welcome from another Vegas member...

pockets · 10-06-2010, 11:12 AM

welcome to the board. I moved from vegas last summer. wish I was still there

Love the powertrain combo!

big_al_71 · 10-06-2010, 12:55 PM

nothing like a chassis all ready to be stripped!!!!

keep the picts coming

Number98 · 10-06-2010, 01:26 PM

Quote:

Originally Posted by big_al_71

nothing like a chassis all ready to be stripped!!!!

keep the picts coming

Agreed....

trkfrk · 10-06-2010, 10:59 PM

Quote:

Originally Posted by Ed 72 Sierra Grande

Sweet Truck and nice garage. Keep us posted on your build.

Have the same parts washer, What kind of solvent do you use these days?

Good Luck

Thanks! I bought the solvent at Harbor Freight.

trkfrk · 10-06-2010, 11:10 PM

Quote:

Originally Posted by LEEVON

There's a kit to move the shifter forward about 5-6 inches, somebody here did a great write-up on it.

Great question!! something i was going to deal with later (buckets if i had to, prefer to stay with a bench). if you have info please let me know.

Hey Vegas guys.... Any C10 clubs around?

I will add pictures as I go. Thanks......

chevy71c10 · 10-06-2010, 11:59 PM

Quote:

Originally Posted by trkfrk

Great question!! something i was going to deal with later (buckets if i had to, prefer to stay with a bench). if you have info please let me know.

Hey Vegas guys.... Any C10 clubs around?

I will add pictures as I go. Thanks......

Hey trkfrk, Welcome to the board. Looks like a great build you have going, I'm doing a very similar build, exception is I'm using an LT-1 with 6 speed. Planning on using late model silverado buckets with integrated shoulder belts. Below are some links I found this week on manual/6 speed installations, one even from another forum about our trucks that includes lots of info. Keep the pics coming and good luck.

Justin

http://67-72chevytrucks.com/vboard/s...d.php?t=300892

http://67-72chevytrucks.com/vboard/s...d.php?t=386136

http://67-72chevytrucks.com/vboard/s...d.php?t=369833

http://www.ls1tech.com/forums/conver...-stepside.html

mcmlxix · 10-07-2010, 01:41 AM

Quote:

Originally Posted by trkfrk

Hey Vegas guys.... Any C10 clubs around?

I will add pictures as I go. Thanks......

Not sure if there are any C10 clubs.... I was trying to get some Pro-Touring types to meet the last Saturday of every month... Mostly Chevelle guys... We did good for a few months... then it just got too hot ... So I havent tried to keep it going.... It was at the Red Rock Casino .. Where in Vegas are you?

I'm doing an LS3/T56 swap into my 67 Chevelle... not sure I can be any help as its still in progress....

**Tom Vogel** · 10-07-2010, 09:25 AM

I drove that combo in a Camaro; it was sweet. You going to freshen the motor?

trkfrk · 10-09-2010, 12:17 PM

Quote:

Originally Posted by Tom Vogel

I drove that combo in a Camaro; it was sweet. You going to freshen the motor?

Not right now. The motor has 64,000 miles and I purchased it with a 6 month warranty. After the build is complete I plan on some upgrades. One of the reasons I decided on the LS1 is the availibility of aftermarket parts - Its endless..

jay6891 · 10-09-2010, 05:42 PM

Is the trans a T56? if so here is a write up on moving shifter.

http://67-72chevytrucks.com/vboard/s...d.php?t=300892

VA72C10 · 10-09-2010, 05:48 PM

Sounds like a cool build!

tantrumpipeline · 10-09-2010, 06:18 PM

looks like fun, I'm doing the same myself, if this site weren't here, never woulda dove into a full on frame off resto but there is way too much info on here to not take full advantage and roll with it, good luck with the build

dhpenner · 10-09-2010, 07:31 PM

I did the same swap in my truck. Let me know if you run into any problems. What kind of engine mounts, fuel tank, harness, etc... are you going to use?

chevy71c10 · 10-09-2010, 08:54 PM

Quote:

Originally Posted by dhpenner

I did the same swap in my truck. Let me know if you run into any problems. What kind of engine mounts, fuel tank, harness, etc... are you going to use?

What kind of seat and did you use the front or rear shifter mounting location in your truck?

Thanks,
Justin

10-05-2010, 07:35 PM	#1
trkfrk Registered User Join Date: Jul 2010 Location: Las Vegas, NV Posts: 969	Started my first frame off - 72 SWB LS1, 6-spd manual I'm new to the site and love it. I purchased my truck from Ebay about 3 years ago - an actual AZ truck with only surface rust. started on the tear down in August. here are few pictures - wish me luck..

10-05-2010, 07:40 PM	#2
Ed 72 Sierra Grande Registered User Join Date: Jul 2010 Location: Whittier Ca Posts: 172	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Sweet Truck and nice garage. Keep us posted on your build. Have the same parts washer, What kind of solvent do you use these days? Good Luck __________________ Ed F 1972 Sierra Grande White Top Medium Olive 402 bb / Camper Stock, Loaded, Straight & Aged Nicely, No Tilt Original Resto would be nice $

10-05-2010, 07:53 PM	#3
dmwphoto Registered User Join Date: Sep 2010 Location: Richmond, Va Posts: 573	Re: Started my first frame off - 72 SWB LS1, 6-spd manual that is going to be nice!

10-05-2010, 08:55 PM	#4
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: Started my first frame off - 72 SWB LS1, 6-spd manual nice, gotta love those az cars/trucks

10-05-2010, 08:59 PM	#5
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	Re: Started my first frame off - 72 SWB LS1, 6-spd manual It looks Killer! I was thinking of that same combo, any thoughts on where or how that shifter is going to be inside. Guess running buckets is the only option. Still looks Cool.... and Good Luck! __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

10-05-2010, 08:59 PM	#6
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: Started my first frame off - 72 SWB LS1, 6-spd manual You'll have to keep us posted. I would really love a 6-speed in mine, and have been wondering how big of a project it is. __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

10-05-2010, 09:50 PM	#8
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: Started my first frame off - 72 SWB LS1, 6-spd manual nice start

10-05-2010, 10:11 PM	#9
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Started my first frame off - 72 SWB LS1, 6-spd manual my 1st frame off too. I am also doing a genIV 6.0L carb'd LSx conversion but will be running a 200-4r __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

10-05-2010, 11:30 PM	#10
nyncompute Registered User Join Date: Nov 2004 Location: Southern Nevada Posts: 532	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Fellow Las Vegas guy here. Show lots of pics of the build!. I would love to do one up like your doing. Good luck __________________ 1972 K-10 SWB Cheyenne Last edited by nyncompute; 10-05-2010 at 11:36 PM.

10-06-2010, 08:39 AM	#11
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Welcome from another Vegas member... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

10-06-2010, 11:12 AM	#12
pockets Registered User Join Date: Sep 2010 Location: Broken Arrow, OK Posts: 428	Re: Started my first frame off - 72 SWB LS1, 6-spd manual welcome to the board. I moved from vegas last summer. wish I was still there Love the powertrain combo! __________________ Project Bad Karma

10-06-2010, 12:55 PM	#13
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Started my first frame off - 72 SWB LS1, 6-spd manual nothing like a chassis all ready to be stripped!!!! keep the picts coming __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

10-07-2010, 09:25 AM	#19
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Re: Started my first frame off - 72 SWB LS1, 6-spd manual I drove that combo in a Camaro; it was sweet. You going to freshen the motor?

10-09-2010, 05:42 PM	#21
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Is the trans a T56? if so here is a write up on moving shifter. http://67-72chevytrucks.com/vboard/s...d.php?t=300892 __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

10-09-2010, 05:48 PM	#22
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Sounds like a cool build! __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

10-09-2010, 06:18 PM	#23
tantrumpipeline Master Procrastinator Join Date: Sep 2009 Location: Grande Prairie AB Canada Posts: 1,128	Re: Started my first frame off - 72 SWB LS1, 6-spd manual looks like fun, I'm doing the same myself, if this site weren't here, never woulda dove into a full on frame off resto but there is way too much info on here to not take full advantage and roll with it, good luck with the build __________________ My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=395506 20 Duramax tow pig 68 2wd short stepper project 77 2wd short fleet beater 52 short project

10-09-2010, 07:31 PM	#24
dhpenner Registered User Join Date: Feb 2010 Location: Canada Posts: 181	Re: Started my first frame off - 72 SWB LS1, 6-spd manual I did the same swap in my truck. Let me know if you run into any problems. What kind of engine mounts, fuel tank, harness, etc... are you going to use?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.