CA It All (may) Has To Go !! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budnikguy · 10-07-2010, 09:59 PM

Very possible that I may have to move from my home and my business is on it's last legs...so throwing out my accumulation of 67-72 trucks, parts, etc. No big long sobby story, it is what it is....and YES it does suck! Would like to move it as one large package, probably not realistic but would like to try that before pondering parting things out. Here is a list of things...this is off the top of my head while at my business so I am sure I have forgoten somethings:

1969 GMC short fleet complete, little to no rust, V6 305 w/ 3 spd manual (removed, but included)
1969 GMC Motorhome, 350/400, running driving, cruise control, cab has boot into motorhome not cut out cab section, front clip and cab are very nice, motorhome section is excellent just needs some tlc, interior of cab is Excellent other than wear on the drivers side..deluxe door panels.
1967 GMC Panel, 327/350, runs great, body in my eyes has to much rust to try and restore, has great options of tilt and tach, 5 lug disc brake front and 5 lug rear, has 88-98 Tahoe bucket seats and center console.
1970 Chevrolet C10 short fleet, has excellent '68 a/c cab, fresh suspension, painted and cleaned up, drop spindles, lowered springs, chopped cross member, nice bed.
1969 GMC short fleet w/ '68 GMC a/c cab and front clip, original 396 BB and turbo 400, drop spindles and springs, 5 lug disc and 5 lug rear, bed cut out for bridge, original white cab and front clip, primered black bed.
1972 Chevrolet Suburban C10 (my first 67-72....this hurts) almost no rust, just in the drip rails, 373 posi, non a/c original 2 bench seats, original door panles, all glass excellent, '68 front clip, no motor, turbo 350.
1972 GMC C10 long bed, 350/350, a/c cab, runner driver, have most trim, cab is rusted a bit, have replacement a/c cab, 5 lug disc brake,
1967 Chevrolet CST C20 buddy buckets, 454 (needs work), turbo 400 (needs work), small window cab, cab is in excellent condition, Doors are Nice, showing a little rust in the bottom corner.
1968 Suburban C10 rolling chassis with 5 lug front disc brakes, and 5 lug rear end and power steering
1969 Chevrolet C10 long bed rolling chassis 6 lug drum with cab, cab is rough, no motor trans, bed. or clip
1968 GMC C20 rolling chassis with bed and complete suspension

Complete Porterbuilt new V3.2 front drop member, Upper and Lower arms, hood hinges, sb motor mounts, complete rear trailing arm PB suspension (minus the arms)

307/400 out of a '68 C20 not running but turns freely

350/350 out of a '68 C10 not running

4L80e SRTA transmission out of a '91 Suburban complete with brain

ZZ4 Block with cranks, may need on cylinder sleaved

McGaughys 4 wheel disc brake kit with 13" rotors, calipers, and dropped spindle (71/72)

18 circuit Painless wiring kit

also lots of parts to go....tach dashes, tilt column, drive shafts, fenders, hoods, bumpers, core supports, inner fenders, bench seats, bucket seats, tailgates, grills, interior panels, '67 swb bed sides, bed tubs, front bed bulk head, stock wheels, tires, suspension, and on and on..

$18K everything

Adam
951-544-0721

jmedero · 10-07-2010, 10:54 PM

If you want to sell pb front stuff let me know.
Thanks
Juan
Posted via Mobile Device

ksbrktracer · 10-07-2010, 10:59 PM

Looks like a decent price for all of it, but beyond me , but I would be interested in some of the porterbuilt stuff if you start seperating. Good luck with everything ..!

**paul mora** · 10-08-2010, 12:30 AM

If you are selling the 70 chevy short I am interested pm me.
Posted via Mobile Device

SCOOBYDOOBYDOO · 10-08-2010, 12:35 AM

hey man good luck there is definitely money to be made here

bguild · 10-08-2010, 05:45 AM

I have interest in the
Painless wiring harness and the McGaughys 4 wheel disc brake kit with 13" rotors, calipers, and dropped spindle (71/72)

hoss67 · 10-08-2010, 06:42 AM

Wow nice collection. If you decide to part I would be interested in the 67 swb bedside passenger. Maybe the bucket buddy seats also a posi unit if you have? Btw sorry to hear your story.

GobbleStalker · 10-08-2010, 07:52 AM

Interested in the 70 Short fleet and or one of the 69 short fleet.

Let me know.

Kevin

smorg007 · 10-08-2010, 10:49 AM

If you decide to part, I would love a chance at a tilt wheel and tach dash.
Thanks

**Gary 70 Jimmy** · 10-08-2010, 12:51 PM

I could use a standard shift tilt.

**71blksuper4x4** · 10-08-2010, 03:08 PM

Not that you are wanting to part any of it, but I would like that 69 GMC cruise control. Trevor

mwilliams5891 · 10-08-2010, 03:20 PM

if you part i would also love a chance at tach dash cluster and tilt steering column

burb71 · 10-08-2010, 04:38 PM

If you part it, please put me in line for CST horn button & glove box door off of the 67.

rich67 · 10-08-2010, 04:41 PM

i would love to !#it 18k!!! sorry bout your busines brother. ive been there and that is stressful. sure do wish i could help you out. that would be one hell of a caravan back to illinois! rich

**72 Super** · 10-08-2010, 06:34 PM

Sorry to hear you may have to sell, hopefully things get better for you. You have quite a collection and priced very realistic in my opinion.

Ray

budnikguy · 10-08-2010, 06:51 PM

Thanks everyone...and I too think there would be some good $$ to make at this price...but again probably not realistic to find one buyer. Going to get some more pics taken of all the vehicles and parts. Looks like parting may be a reality, but, if that happens I will begin that in a new post, not here! Locals will have an advantage being that I would not have to ship

coolbus4us · 10-08-2010, 07:03 PM

Bummer to hear buddy. I will keep an eye out for ya and if you decide to let stuff go individually I may not be able to resist.

**70cst** · 10-09-2010, 12:04 AM

Quote:

Originally Posted by budnikguy

Thanks everyone...and I too think there would be some good $$ to make at this price...but again probably not realistic to find one buyer. Going to get some more pics taken of all the vehicles and parts. Looks like parting may be a reality, but, if that happens I will begin that in a new post, not here! Locals will have an advantage being that I would not have to ship

This would make things simpler. Sorry to hear about the business.

**68SWB4x4** · 10-09-2010, 01:15 AM

Damn sorry to hear that, nice collection. Any pics of the panel or any of the burbs?

k5hart · 10-09-2010, 03:04 PM

Put me line for the McGaughys 4 wheel disc brake kit with 13" rotors, calipers, and dropped spindle (71/72) if you decide to part it out. Great deal for someone. Sorry your having to part with it.

GobbleStalker · 10-09-2010, 04:25 PM

PM Sent.

m6z · 10-20-2010, 05:14 PM

I posted in the thread on c10forums also. I'm interested in this complete truck if you decide to part. Picts to dougschmid2000@yahoo.com

1969 GMC short fleet w/ '68 GMC a/c cab and front clip, original 396 BB and turbo 400, drop spindles and springs, 5 lug disc and 5 lug rear, bed cut out for bridge, original white cab and front clip, primered black bed.

Toms1968 · 10-20-2010, 07:06 PM

If you decide to part out I will buy the buddy buckets>

10-07-2010, 09:59 PM	#1
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	It All (may) Has To Go !! Very possible that I may have to move from my home and my business is on it's last legs...so throwing out my accumulation of 67-72 trucks, parts, etc. No big long sobby story, it is what it is....and YES it does suck! Would like to move it as one large package, probably not realistic but would like to try that before pondering parting things out. Here is a list of things...this is off the top of my head while at my business so I am sure I have forgoten somethings: 1969 GMC short fleet complete, little to no rust, V6 305 w/ 3 spd manual (removed, but included) 1969 GMC Motorhome, 350/400, running driving, cruise control, cab has boot into motorhome not cut out cab section, front clip and cab are very nice, motorhome section is excellent just needs some tlc, interior of cab is Excellent other than wear on the drivers side..deluxe door panels. 1967 GMC Panel, 327/350, runs great, body in my eyes has to much rust to try and restore, has great options of tilt and tach, 5 lug disc brake front and 5 lug rear, has 88-98 Tahoe bucket seats and center console. 1970 Chevrolet C10 short fleet, has excellent '68 a/c cab, fresh suspension, painted and cleaned up, drop spindles, lowered springs, chopped cross member, nice bed. 1969 GMC short fleet w/ '68 GMC a/c cab and front clip, original 396 BB and turbo 400, drop spindles and springs, 5 lug disc and 5 lug rear, bed cut out for bridge, original white cab and front clip, primered black bed. 1972 Chevrolet Suburban C10 (my first 67-72....this hurts) almost no rust, just in the drip rails, 373 posi, non a/c original 2 bench seats, original door panles, all glass excellent, '68 front clip, no motor, turbo 350. 1972 GMC C10 long bed, 350/350, a/c cab, runner driver, have most trim, cab is rusted a bit, have replacement a/c cab, 5 lug disc brake, 1967 Chevrolet CST C20 buddy buckets, 454 (needs work), turbo 400 (needs work), small window cab, cab is in excellent condition, Doors are Nice, showing a little rust in the bottom corner. 1968 Suburban C10 rolling chassis with 5 lug front disc brakes, and 5 lug rear end and power steering 1969 Chevrolet C10 long bed rolling chassis 6 lug drum with cab, cab is rough, no motor trans, bed. or clip 1968 GMC C20 rolling chassis with bed and complete suspension Complete Porterbuilt new V3.2 front drop member, Upper and Lower arms, hood hinges, sb motor mounts, complete rear trailing arm PB suspension (minus the arms) 307/400 out of a '68 C20 not running but turns freely 350/350 out of a '68 C10 not running 4L80e SRTA transmission out of a '91 Suburban complete with brain ZZ4 Block with cranks, may need on cylinder sleaved McGaughys 4 wheel disc brake kit with 13" rotors, calipers, and dropped spindle (71/72) 18 circuit Painless wiring kit also lots of parts to go....tach dashes, tilt column, drive shafts, fenders, hoods, bumpers, core supports, inner fenders, bench seats, bucket seats, tailgates, grills, interior panels, '67 swb bed sides, bed tubs, front bed bulk head, stock wheels, tires, suspension, and on and on.. $18K everything Adam 951-544-0721

10-07-2010, 10:54 PM	#2
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: It All (may) Has To Go !! If you want to sell pb front stuff let me know. Thanks Juan Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

10-07-2010, 10:59 PM	#3
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: It All (may) Has To Go !! Looks like a decent price for all of it, but beyond me , but I would be interested in some of the porterbuilt stuff if you start seperating. Good luck with everything ..!

10-08-2010, 12:30 AM	#4
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: It All (may) Has To Go !! If you are selling the 70 chevy short I am interested pm me. Posted via Mobile Device

10-08-2010, 12:35 AM	#5
SCOOBYDOOBYDOO Registered User Join Date: Feb 2010 Location: DANA POINT CA Posts: 256	Re: It All (may) Has To Go !! hey man good luck there is definitely money to be made here __________________ ScoobyDoobyDoo

10-08-2010, 05:45 AM	#6
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: It All (may) Has To Go !! I have interest in the Painless wiring harness and the McGaughys 4 wheel disc brake kit with 13" rotors, calipers, and dropped spindle (71/72) __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

10-08-2010, 06:42 AM	#7
hoss67 Registered User Join Date: Jun 2009 Location: Harrisville, MS Posts: 267	Re: It All (may) Has To Go !! Wow nice collection. If you decide to part I would be interested in the 67 swb bedside passenger. Maybe the bucket buddy seats also a posi unit if you have? Btw sorry to hear your story.

10-08-2010, 07:52 AM	#8
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: It All (may) Has To Go !! Interested in the 70 Short fleet and or one of the 69 short fleet. Let me know. Kevin __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride ) Last edited by GobbleStalker; 10-08-2010 at 07:54 AM.

10-08-2010, 10:49 AM	#9
smorg007 Registered User Join Date: May 2010 Location: Redding, Ca Posts: 371	Re: It All (may) Has To Go !! If you decide to part, I would love a chance at a tilt wheel and tach dash. Thanks

10-08-2010, 12:51 PM	#10
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: It All (may) Has To Go !! I could use a standard shift tilt. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

10-08-2010, 03:08 PM	#11
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: It All (may) Has To Go !! Not that you are wanting to part any of it, but I would like that 69 GMC cruise control. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

10-08-2010, 03:20 PM	#12
mwilliams5891 Registered User Join Date: Aug 2010 Location: Springfield, Oregon Posts: 164	Re: It All (may) Has To Go !! if you part i would also love a chance at tach dash cluster and tilt steering column

10-08-2010, 04:38 PM	#13
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: It All (may) Has To Go !! If you part it, please put me in line for CST horn button & glove box door off of the 67.

10-08-2010, 04:41 PM	#14
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: It All (may) Has To Go !! i would love to !#it 18k!!! sorry bout your busines brother. ive been there and that is stressful. sure do wish i could help you out. that would be one hell of a caravan back to illinois! rich

10-08-2010, 06:34 PM	#15
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: It All (may) Has To Go !! Sorry to hear you may have to sell, hopefully things get better for you. You have quite a collection and priced very realistic in my opinion. Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White



Register or Log In To remove these advertisements.

10-08-2010, 06:51 PM	#16
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: It All (may) Has To Go !! Thanks everyone...and I too think there would be some good $$ to make at this price...but again probably not realistic to find one buyer. Going to get some more pics taken of all the vehicles and parts. Looks like parting may be a reality, but, if that happens I will begin that in a new post, not here! Locals will have an advantage being that I would not have to ship

10-08-2010, 07:03 PM	#17
coolbus4us cuts corners Join Date: Jan 2009 Location: Riverside, CA Posts: 246	Re: It All (may) Has To Go !! Bummer to hear buddy. I will keep an eye out for ya and if you decide to let stuff go individually I may not be able to resist. __________________ '68 Suburban named the "Cool Bus" by my kids Follow the project here: http://67-72chevytrucks.com/vboard/s...d.php?t=331448 I love my Suburban.....a lot!

10-09-2010, 01:15 AM	#19
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	Re: It All (may) Has To Go !! Damn sorry to hear that, nice collection. Any pics of the panel or any of the burbs? __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

10-09-2010, 03:04 PM	#20
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	Re: It All (may) Has To Go !! Put me line for the McGaughys 4 wheel disc brake kit with 13" rotors, calipers, and dropped spindle (71/72) if you decide to part it out. Great deal for someone. Sorry your having to part with it. __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

10-09-2010, 04:25 PM	#21
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: It All (may) Has To Go !! PM Sent. __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

10-20-2010, 05:14 PM	#22
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: It All (may) Has To Go !! I posted in the thread on c10forums also. I'm interested in this complete truck if you decide to part. Picts to dougschmid2000@yahoo.com 1969 GMC short fleet w/ '68 GMC a/c cab and front clip, original 396 BB and turbo 400, drop spindles and springs, 5 lug disc and 5 lug rear, bed cut out for bridge, original white cab and front clip, primered black bed. __________________ Doug Looking for a 67-72 short bed driver..... Last edited by m6z; 10-20-2010 at 05:15 PM.

10-20-2010, 07:06 PM	#23
Toms1968 Registered User Join Date: Aug 2010 Location: Airmont NY Posts: 72	Re: It All (may) Has To Go !! If you decide to part out I will buy the buddy buckets>

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.