Wiring Harness Replacement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dustydog · 10-18-2010, 10:50 PM

I am looking to replace the complete wiring harness in my 70 GMC. Question, can I still use the stock guages? Do the aftermarket harness's connect to the plug on the guage cluster?

Any recomendations on what harness to purchase? This will be my winter project, I am not the best at wiring plus as I get older I am not nearly as fast as I use to be!

Thanks,
Dusty

ChevLoRay · 10-18-2010, 11:10 PM

I ordered mine through Wes at Classic Heartbeat. It is from M&H Electrical Fabricators and it is factory-correct in color and markings as well as connectors. Go to www.wiringharness.com to see what M&H has available. Wes beat their prices.

NINERS1 · 10-18-2010, 11:13 PM

I guess it depends on the harness you buy, I did my 71 with a painless model specific and yes it came with all the correct connectors and was even the correct colored wires that matched the factory harness. did it myself in the garage and i'm not very good at wireing!! lol. took me a couple days but was not that bad. so i would recomend painless. good luck!!!

chevy71c10 · 10-19-2010, 12:54 AM

I've used American Autowire in the past to wire another vehicle and it was a nice setup with options to connect to factory gauges or to connect to an aftermarket set of gauges, both with very detailed instructions, schematics and wires labeled every 6 inches or so. However, I know there are several quality setups for these trucks out there in varying price ranges.

Good Luck,
Justin

67C10BUB · 10-19-2010, 05:48 AM

I just installed the AAW kit and it does come with the factory cluster connections. The instructions in this kit could not have been any better. I would highly recommend it.

**truckdude239** · 10-19-2010, 11:49 AM

http://cgi.ebay.com/ebaymotors/ws/eB...m=350398428654
is what i bought 458.00 suppose to be delievered today

Dustydog · 10-30-2010, 10:09 PM

TruckDude, did you get the harness? Have you installed it yet?

Dusty

Dustydog · 10-30-2010, 10:10 PM

A friend of mine has built several street rods and he used Ron Francis wiring kits. He said they are under $300.00. Has anyone tried them?

Thanks,
Dusty

10-18-2010, 10:50 PM	#1
Dustydog Registered User Join Date: Aug 2009 Location: Spring Grove Il Posts: 122	Wiring Harness Replacement I am looking to replace the complete wiring harness in my 70 GMC. Question, can I still use the stock guages? Do the aftermarket harness's connect to the plug on the guage cluster? Any recomendations on what harness to purchase? This will be my winter project, I am not the best at wiring plus as I get older I am not nearly as fast as I use to be! Thanks, Dusty __________________ Dustydog 1940 Ford 2D SDN 1970 GMC SB 2004 C5 Vette

10-18-2010, 11:10 PM	#2
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Wiring Harness Replacement I ordered mine through Wes at Classic Heartbeat. It is from M&H Electrical Fabricators and it is factory-correct in color and markings as well as connectors. Go to www.wiringharness.com to see what M&H has available. Wes beat their prices. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

10-18-2010, 11:13 PM	#3
NINERS1 Registered User Join Date: Feb 2006 Location: weatherford ok. Posts: 255	Re: Wiring Harness Replacement I guess it depends on the harness you buy, I did my 71 with a painless model specific and yes it came with all the correct connectors and was even the correct colored wires that matched the factory harness. did it myself in the garage and i'm not very good at wireing!! lol. took me a couple days but was not that bad. so i would recomend painless. good luck!!! __________________ 71 chevy cheyenne lwb http://s321.photobucket.com/albums/n..._tab_my_albums Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote!

10-19-2010, 12:54 AM	#4
chevy71c10 Registered User Join Date: Oct 2009 Location: Panama City Beach, FL Posts: 228	Re: Wiring Harness Replacement I've used American Autowire in the past to wire another vehicle and it was a nice setup with options to connect to factory gauges or to connect to an aftermarket set of gauges, both with very detailed instructions, schematics and wires labeled every 6 inches or so. However, I know there are several quality setups for these trucks out there in varying price ranges. Good Luck, Justin __________________ Justin 71' C10 SWB 00' Dakota R/T 05' Z-71 Silverado 16' Z-71 Silverado Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=376904

10-19-2010, 05:48 AM	#5
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Re: Wiring Harness Replacement I just installed the AAW kit and it does come with the factory cluster connections. The instructions in this kit could not have been any better. I would highly recommend it. __________________ 67 5.3L Build

10-19-2010, 11:49 AM	#6
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Wiring Harness Replacement http://cgi.ebay.com/ebaymotors/ws/eB...m=350398428654 is what i bought 458.00 suppose to be delievered today __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

10-30-2010, 10:09 PM	#7
Dustydog Registered User Join Date: Aug 2009 Location: Spring Grove Il Posts: 122	Re: Wiring Harness Replacement TruckDude, did you get the harness? Have you installed it yet? Dusty __________________ Dustydog 1940 Ford 2D SDN 1970 GMC SB 2004 C5 Vette

10-30-2010, 10:10 PM	#8
Dustydog Registered User Join Date: Aug 2009 Location: Spring Grove Il Posts: 122	Re: Wiring Harness Replacement A friend of mine has built several street rods and he used Ron Francis wiring kits. He said they are under $300.00. Has anyone tried them? Thanks, Dusty __________________ Dustydog 1940 Ford 2D SDN 1970 GMC SB 2004 C5 Vette

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.