Is there a way? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CHaingKaiShek · 03-01-2003, 04:21 PM

To read the computer error codes from an '84 Silverado truck?

I remember with my '86 pontiac you could do this buy jumpering the 'check' plug with a paperclip or something, then simply turn on the ignition and the error codes would flash at the check engine light.

Anyone have any infomation on this, or is it impossible to do without the proper diagnostic tools?

Jeff

ocbaud · 03-01-2003, 04:23 PM

computer error codes?

TODDS 72 · 03-01-2003, 04:45 PM

no,theres just a minum feed back puter just for your idle selinoed,no codes to read.its pretty much just a silver fuse.......lol

CHaingKaiShek · 03-01-2003, 05:19 PM

Quote:

Originally posted by TODDS 72
no,theres just a minum feed back puter just for your idle selinoed,no codes to read.its pretty much just a silver fuse.......lol

Well a shop can read the codes on the engine ECU. I know because I was standing right there when he did it. However he was using one of those code scanning machines from GM. I simply needed to know if the system could be jumpered to display the codes.

It's not the basic ECU obviously, or else it would not have been able to display codes at the carb. shop.

I guess I'll just have to give it a go and see what I can break.

Jeff

c10scotty · 03-01-2003, 07:25 PM

Quote:

Originally posted by ocbaud
computer error codes?

ditto, 84 doesnt have a computer. what am i missing?

CHaingKaiShek · 03-02-2003, 01:39 AM

Well figured out what it is.. it's an 84 body but the engine is from somewhere else. It difinately has an ECU that gives feedback however or else jumpering would not have given the 1-2 flashes on the check engine light.

Not really sure what my buddy has here, certaintly a PITA truck.

Thanks anyways, guys.

Jeff

03-01-2003, 04:21 PM	#1
CHaingKaiShek I love goooooold! Join Date: Jan 2003 Location: In the middle of Hell, Arizona Posts: 133	Is there a way? To read the computer error codes from an '84 Silverado truck? I remember with my '86 pontiac you could do this buy jumpering the 'check' plug with a paperclip or something, then simply turn on the ignition and the error codes would flash at the check engine light. Anyone have any infomation on this, or is it impossible to do without the proper diagnostic tools? Jeff __________________ "Musha ring dum a doo dum a da Whack for my daddy-o Whack for my daddy-o There's whiskey in the jar-o."

03-01-2003, 04:45 PM	#3
TODDS 72 Not the nightly winner Join Date: Jul 2002 Location: CHARLEMONT MA.USA Posts: 763	no,theres just a minum feed back puter just for your idle selinoed,no codes to read.its pretty much just a silver fuse.......lol __________________ 72C10SWB BLUE 350/350 86K10LWB BLUE 5.7 700r4 7.5' fisher plow 93S10XCAB4X4 BLUE 4.3 4L60e 69gmc c10 v8 3 on the tree yellow 72k10 swb 350 3 on the tree green 86k15 swb5.0L 4spd brown

03-02-2003, 01:39 AM	#6
CHaingKaiShek I love goooooold! Join Date: Jan 2003 Location: In the middle of Hell, Arizona Posts: 133	Well figured out what it is.. it's an 84 body but the engine is from somewhere else. It difinately has an ECU that gives feedback however or else jumpering would not have given the 1-2 flashes on the check engine light. Not really sure what my buddy has here, certaintly a PITA truck. Thanks anyways, guys. Jeff __________________ "Musha ring dum a doo dum a da Whack for my daddy-o Whack for my daddy-o There's whiskey in the jar-o."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-01-2003, 04:23 PM	#2
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	computer error codes?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.