TX looking for a 4bbl intake manifold for a 250 6cyl/ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rio · 11-17-2010, 12:29 PM

Looking for a 4bbl intake manifold. for a 6 cyl 250.
looking for Headers. for a 250 6cyl.

Thanks
Rio

70LonghornCST · 11-17-2010, 02:58 PM

You can find this stuff at Summit Racing

**bigunde** · 11-17-2010, 03:17 PM

there was also a few on ebay

**ScottH** · 11-17-2010, 03:42 PM

I have a setup that I was going to list in the near future so here goes.
Would prefer to sell as a unit - offy 4 barrel into, clifford split headers, professionally rebuilt holley 390 never run. I would like to get $500 for everything. If interested LMK and I can supply pics over the weekend.

Thanks.
Scott

rio · 11-17-2010, 06:48 PM

Are the headers long tube? Yes, I'm interested. Send pictures when able.
thanks
rio

rio · 11-17-2010, 07:30 PM

list # On Holley?

**ScottH** · 11-17-2010, 08:07 PM

rio, headers are clifford split, kinda short....will get u pics and numbers over the weekend.

Scott

rio · 11-17-2010, 09:49 PM

Are all the parts new?
Rio

**ScottH** · 11-18-2010, 01:20 PM

they r used but in great shape

suville · 11-18-2010, 03:14 PM

If ya do split the package might be interested in headers pending pic. Thanks!

**ScottH** · 11-27-2010, 12:19 AM

Sorry for the delay but finally had some time today to get some pics.
Any questions please LMK.

Thanks.
Scott

**ScottH** · 11-27-2010, 12:21 AM

And carb

11-17-2010, 12:29 PM	#1
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	looking for a 4bbl intake manifold for a 250 6cyl/ Looking for a 4bbl intake manifold. for a 6 cyl 250. looking for Headers. for a 250 6cyl. Thanks Rio __________________ 1970 1/2 ton swb Last edited by rio; 11-17-2010 at 12:30 PM.

11-17-2010, 02:58 PM	#2
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: looking for a 4bbl intake manifold for a 250 6cyl/ You can find this stuff at Summit Racing __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

11-17-2010, 03:17 PM	#3
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	Re: looking for a 4bbl intake manifold for a 250 6cyl/ there was also a few on ebay

11-17-2010, 03:42 PM	#4
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Re: looking for a 4bbl intake manifold for a 250 6cyl/ I have a setup that I was going to list in the near future so here goes. Would prefer to sell as a unit - offy 4 barrel into, clifford split headers, professionally rebuilt holley 390 never run. I would like to get $500 for everything. If interested LMK and I can supply pics over the weekend. Thanks. Scott __________________ 1963 C10 swb fleetside 1966 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-17-2010, 06:48 PM	#5
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: looking for a 4bbl intake manifold for a 250 6cyl/ Are the headers long tube? Yes, I'm interested. Send pictures when able. thanks rio __________________ 1970 1/2 ton swb

11-17-2010, 07:30 PM	#6
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: looking for a 4bbl intake manifold for a 250 6cyl/ list # On Holley? __________________ 1970 1/2 ton swb

11-17-2010, 08:07 PM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Re: looking for a 4bbl intake manifold for a 250 6cyl/ rio, headers are clifford split, kinda short....will get u pics and numbers over the weekend. Scott __________________ 1963 C10 swb fleetside 1966 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-17-2010, 09:49 PM	#8
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: looking for a 4bbl intake manifold for a 250 6cyl/ Are all the parts new? Rio __________________ 1970 1/2 ton swb

11-18-2010, 01:20 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Re: looking for a 4bbl intake manifold for a 250 6cyl/ they r used but in great shape __________________ 1963 C10 swb fleetside 1966 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-18-2010, 03:14 PM	#10
suville Registered User Join Date: Jun 2003 Location: Mtn. Home, Idaho Posts: 906	Re: looking for a 4bbl intake manifold for a 250 6cyl/ *If ya do split the package might be interested in headers pending pic. Thanks!*

11-27-2010, 12:19 AM	#11
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Re: looking for a 4bbl intake manifold for a 250 6cyl/ Sorry for the delay but finally had some time today to get some pics. Any questions please LMK. Thanks. Scott Attached Images __________________ 1963 C10 swb fleetside 1966 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-27-2010, 12:21 AM	#12
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Re: looking for a 4bbl intake manifold for a 250 6cyl/ And carb Attached Images __________________ 1963 C10 swb fleetside 1966 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.