My "other" Turd! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*1LOW4X4* · 11-24-2010, 11:11 PM

Here's my '01....this truck is the reason I got the '86 to Daily.....

2001 silverado LT Z-71...dropped, shaved, painted up and all that jazz. Colormatched EVERYTHING. painted and detailed under hood. Dash painted to match. Blue LED dash lights. 22" wheels, working 4x4, stainless steel LT headers, full 3" dual exhaust, custom tune, ported and polished throttle body, ls1 e-fans, and a little bit more. HID's, LED's, I have 2 ls1's in the garage, one is a longblock and is almost ready to drop in, the other a shortblock.

Whadya think?

What I started with

engine before:

When I was cleaning the engine bay for paint

The ls1

C10-Driver · 11-25-2010, 02:05 AM

Looks awesome... That must have been a pile of work color-matching everything that you did. Great job.

*1LOW4X4* · 11-25-2010, 02:41 AM

Thanks man! My garage queen!

JohnC · 11-26-2010, 09:59 AM

Looks awesome man!

Jacfourteen · 11-26-2010, 09:42 PM

Sweet truck! Where is the "turd"? I don't see anything of the sort here

fryer1979 · 11-27-2010, 12:49 AM

That's a nice, clean looking truck you've got there 1low. Very well tied together.

**Boog** · 11-27-2010, 09:20 PM

It's like two different trucks. I've wondered if a 4by could be lowered and still functional. Looks good.

67ChevyRedneck · 11-27-2010, 10:12 PM

You have really nice turds. My turds actually look like crap

Awesome, very awesome. That's how GM's AWD SS truck should have looked...

*1LOW4X4* · 11-27-2010, 10:54 PM

Thanks dudes!!!

DirtyLarry · 11-28-2010, 01:22 AM

Looks great! I didn’t realize one could get a GMT800 4x4 lowered to look that good. Yours just looks "right". I love it!

I love your attention to detail too. Good job!

**Boog** · 11-28-2010, 12:43 PM

My 2000 GMC is not lifted as far as I can tell but it does have 285/75/16 rubber on it and no rubbing issues.

*1LOW4X4* · 11-28-2010, 02:10 PM

Here was the truck before I lowered it, bout 2 years after I got it. 285/75/16 mudders with no issues.

The date on the pic is wrong...

JohnC · 11-29-2010, 10:17 AM

Looks good before and after! Those are the best kind.

Jacfourteen · 11-29-2010, 12:15 PM

How much did you drop it? I've seen 3/4 kits and I've thought of dropping my tahoe. Also what size are the tires? Looks to be 265/35/22, I have 305/40/22's and I'm not sure if a drop would cause issues or not.

*1LOW4X4* · 11-29-2010, 01:18 PM

6/7 drop. from 4wd height. Tires are 265/35/22.

Jacfourteen · 11-29-2010, 02:22 PM

Quote:

Originally Posted by 1LOW4X4

6/7 drop. from 4wd height. Tires are 265/35/22.

How did you get that much drop? I thought it looked pretty low, I didn't think you could drop it that much with 4wd still intact.

silvereagle07 · 11-29-2010, 05:36 PM

Looks nice!

*1LOW4X4* · 11-29-2010, 07:11 PM

Quote:

Originally Posted by Jacfourteen

How did you get that much drop? I thought it looked pretty low, I didn't think you could drop it that much with 4wd still intact.

For the front:

Purple keys (come off the 2500 truck) to lower 2" from dealership
3" lowering Lower control arms from DJM
1" decrank on the keys

For a total of 6" in the front.

In the rear:

Removal of factory 2" blocks
2" drop shackles
2" drop hangers
removal of overload spring for another 1"

For a total of 7"

Jacfourteen · 11-29-2010, 10:09 PM

Quote:

Originally Posted by 1LOW4X4

For the front:

Purple keys (come off the 2500 truck) to lower 2" from dealership
3" lowering Lower control arms from DJM
1" decrank on the keys

For a total of 6" in the front.

In the rear:

Removal of factory 2" blocks
2" drop shackles
2" drop hangers
removal of overload spring for another 1"

For a total of 7"

Thanks for the specs. I forgot about the trucks having leaves, I was thinking about how my tahoe has coils. On mine I'm not sure if I could drop the rear that much. Your drop looks killer, but IF I decide to drop my hoe I think I'll go a little less extreme.

*1LOW4X4* · 11-30-2010, 01:14 AM

Yes I'd like to drop my suburban about 3/4 but the wifes not having it

**Boog** · 05-16-2013, 02:11 PM

double click

**Boog** · 05-16-2013, 02:15 PM

Since the topic of lowered 4wd comes up now and then I am bumping this one to the top. Too bad 1low4x4's account is suspended.
DJM Suspension has the parts to get them down while maintaining ride and alignment.

11-24-2010, 11:11 PM	#1
1LOW4X4 Account Suspended Join Date: Jul 2010 Location: Southeast Texas Posts: 189	My "other" Turd! Here's my '01....this truck is the reason I got the '86 to Daily..... 2001 silverado LT Z-71...dropped, shaved, painted up and all that jazz. Colormatched EVERYTHING. painted and detailed under hood. Dash painted to match. Blue LED dash lights. 22" wheels, working 4x4, stainless steel LT headers, full 3" dual exhaust, custom tune, ported and polished throttle body, ls1 e-fans, and a little bit more. HID's, LED's, I have 2 ls1's in the garage, one is a longblock and is almost ready to drop in, the other a shortblock. Whadya think? What I started with engine before: When I was cleaning the engine bay for paint The ls1 Last edited by 1LOW4X4; 11-25-2010 at 12:08 AM.

11-25-2010, 02:05 AM	#2
C10-Driver Chevy Truck Addict Join Date: Aug 2006 Location: Kelowna, BC Posts: 1,176	Re: My "other" Turd! Looks awesome... That must have been a pile of work color-matching everything that you did. Great job. __________________ . 1970 Chev C/10 SWB, 355 SBC, 700R4, 3.73 Posi, Air Ride (Click to view Build Thread) (SOLD) 1978 Chevy C/10 SWB 1970 Pontiac Lemans .

11-25-2010, 02:41 AM	#3
1LOW4X4 Account Suspended Join Date: Jul 2010 Location: Southeast Texas Posts: 189	Re: My "other" Turd! Thanks man! My garage queen!

11-26-2010, 09:59 AM	#4
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: My "other" Turd! Looks awesome man!

11-26-2010, 09:42 PM	#5
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: My "other" Turd! Sweet truck! Where is the "turd"? I don't see anything of the sort here __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's

11-27-2010, 12:49 AM	#6
fryer1979 Redneck Hillbilly Join Date: Jan 2010 Location: Backwoods Posts: 1,307	Re: My "other" Turd! That's a nice, clean looking truck you've got there 1low. Very well tied together.

11-27-2010, 09:20 PM	#7
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,513	Re: My "other" Turd! It's like two different trucks. I've wondered if a 4by could be lowered and still functional. Looks good. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

11-27-2010, 10:12 PM	#8
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: My "other" Turd! You have really nice turds. My turds actually look like crap Awesome, very awesome. That's how GM's AWD SS truck should have looked... __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

11-27-2010, 10:54 PM	#9
1LOW4X4 Account Suspended Join Date: Jul 2010 Location: Southeast Texas Posts: 189	Re: My "other" Turd! Thanks dudes!!!

11-28-2010, 01:22 AM	#10
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	Re: My "other" Turd! Looks great! I didn’t realize one could get a GMT800 4x4 lowered to look that good. Yours just looks "right". I love it! I love your attention to detail too. Good job! __________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram

11-28-2010, 12:43 PM	#11
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,513	Re: My "other" Turd! My 2000 GMC is not lifted as far as I can tell but it does have 285/75/16 rubber on it and no rubbing issues. Attached Images __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

11-28-2010, 02:10 PM	#12
1LOW4X4 Account Suspended Join Date: Jul 2010 Location: Southeast Texas Posts: 189	Re: My "other" Turd! Here was the truck before I lowered it, bout 2 years after I got it. 285/75/16 mudders with no issues. The date on the pic is wrong...

11-29-2010, 10:17 AM	#13
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: My "other" Turd! Looks good before and after! Those are the best kind.

11-29-2010, 12:15 PM	#14
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: My "other" Turd! How much did you drop it? I've seen 3/4 kits and I've thought of dropping my tahoe. Also what size are the tires? Looks to be 265/35/22, I have 305/40/22's and I'm not sure if a drop would cause issues or not. __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's

11-29-2010, 01:18 PM	#15
1LOW4X4 Account Suspended Join Date: Jul 2010 Location: Southeast Texas Posts: 189	Re: My "other" Turd! 6/7 drop. from 4wd height. Tires are 265/35/22. Last edited by 1LOW4X4; 11-29-2010 at 01:19 PM.



Register or Log In To remove these advertisements.

11-29-2010, 05:36 PM	#17
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: My "other" Turd! Looks nice! __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

11-30-2010, 01:14 AM	#20
1LOW4X4 Account Suspended Join Date: Jul 2010 Location: Southeast Texas Posts: 189	Re: My "other" Turd! Yes I'd like to drop my suburban about 3/4 but the wifes not having it

05-16-2013, 02:11 PM	#21
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,513	Re: My "other" Turd! double click __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross Last edited by Boog; 05-16-2013 at 02:16 PM.

05-16-2013, 02:15 PM	#22
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,513	Re: lowered 4 wdrives Since the topic of lowered 4wd comes up now and then I am bumping this one to the top. Too bad 1low4x4's account is suspended. DJM Suspension has the parts to get them down while maintaining ride and alignment. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.