New Member - 68 Stepper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigMike608 · 11-26-2010, 02:48 AM

Hello everyone, my name is Mike and I've been lurking around the forums for about a month now waiting until the chance that I could finally introduce myself. As of today I'm now the proud owner a nice little 68 Stepper. I was on my way to my mom's house this morning in East Texas for Thanksgiving and just as I entered the city limits this truck was just sitting there with a huge sale sign on it that caught my eye. I took my wife and kids to my mom's house, dropped them off, and went back to take a closer look at the truck. I took a quick walk around and looked inside just as it started to rain and I wrote down the number of the person that was selling it. I gave him a call a little after we finished eating Thanksgiving dinner and just before the Dallas Cowboys game came on. The owner agreed to meet me because I was only in town for today and later tonight I was heading back home to Dallas. I guess it was my lucky day because me and the owner ended up talking and having a great conversation and in the end we came to an agreement on the truck!!!! This turned out to be a great Thanksgiving!!!! Here are few pics, sorry they are so bad... I took them with my camera phone in the rain. And the 350 and powerglide automatic tranny drives GREAT!!!!

PanelDeland · 11-26-2010, 07:29 AM

WELCOME!!!Looks like a great start to a project.The rear fenders are later model but you probably know that after "lurking" for a month.What are your plans?

68Stepbed · 11-26-2010, 08:39 AM

Nice starter project. It looks like someone has already swapped to a 5-lug rear. Just put a 5-lug front disc conversion, and your good to go.

What kind of plans do you have for it?

spike38 · 11-26-2010, 08:50 AM

Quote:

Originally Posted by 68Stepbed

Nice starter project. It looks like someone has already swapped to a 5-lug rear. Just put a 5-lug front disc conversion, and your good to go.

What kind of plans do you have for it?

I believe those are 6 lug rims as well.
But I still applaud the vintage and model.

Spike

Putter · 11-26-2010, 09:34 AM

Quote:

Originally Posted by spike38

I believe those are 6 lug rims as well.
Spike

If you are talking about the ones on the rear, those were only available on 1/2ton 2wd trucks which were 5-lug.

Anywho...nice looking ride. Great platform to get started.

(just ditch that air cleaner ASAP. The foam element can ignite if you backfire thru the carb)

Husker · 11-26-2010, 10:22 AM

Great looking truck, Welcome.
Ron

lt704 · 11-26-2010, 10:26 AM

Welcome to the group Mike, nice ride...we don't them find like that in Massachusetts. Good luck with your new truck...Russ

*mrhino* · 11-26-2010, 10:55 AM

sweet little project Mike. those kind of stories are cool to hear about.

Shyguy · 11-26-2010, 11:33 AM

Good looking truck. Drive it a while, enjoy it and figure out what you want to do with it. I am still trying to figure out what I want the end result to be on my trucks.

I enjoy driving them to much to have them torn down for a long time.

BigMike608 · 11-26-2010, 12:19 PM

thanks for the warm welcome everyone. I really dont have any big plans for it right now off the bat. My first tasks will be doing the front end conversion to 5 lug and changing out the wheels, nothing too fancy and getting that gas tank out the bed and underneath. I will have to find someone here in DFW to do the gas tank for me because i have absolutely no idea how to do this myself. I've decided to name the truck after my grandmother that passed away. I'm going to call it Beta Mae. As my grandmother got older the more and more she kept going and never seemed to quit. She grew stronger with age and that's exactly what this truck represents. I will have to have it and drive it for a while before I decide what i want for the long term goal. I think I'm going to keep it pretty stock and not get to wild with it because I like the old nostalgia of it and will most likely go with a nice black satin finish with some Coys.

magwakeenercew2jh · 11-26-2010, 12:44 PM

If the 1950 that is posted on the passenger's window is anywhere CLOSE to the price you paid.... even doubled....then you scored. Even if the motor blows next week.

HOW SWEET!!!!!

After I tried to figure out what's hanging off of the right side of your heater on the fire wall, I started to compare what you have and the pile of parts I started with this time...And my truck was a Texas truck, as well.

These are tears of joy for you....really. No, really!

BigMike608 · 11-26-2010, 12:49 PM

Believe it or not I talked the guy down to $1700, so it I truly believe that I SCORED big time on this one!!!!! Wifey not too happy because it's so close to Christmas but I tried to explain to her that you just don't come across deals like this everyday!!!!! you have to strike while the iron is hot LOL.

swamp rat · 11-26-2010, 01:09 PM

Quote:

Originally Posted by lpruitt

Believe it or not I talked the guy down to $1700, so it I truly believe that I SCORED big time on this one!!!!! Wifey not too happy because it's so close to Christmas but I tried to explain to her that you just don't come across deals like this everyday!!!!! you have to strike while the iron is hot LOL.

In my area yes you scored big, other parts of the country from what i read here its about an average price which i find hard to even emagin.

There are 2 guys here that make under bed fuel cells for these trucks, fuel cell guy, and David Boyd, do a search on them and you'll learn a lot about it.

David boyd does a group buy about every 6 months, heres a couple of links to start.:

http://67-72chevytrucks.com/vboard/s...d.php?t=362307

http://67-72chevytrucks.com/vboard/s...d.php?t=197895

BigMike608 · 11-26-2010, 02:01 PM

Quote:

Originally Posted by swamp rat

In my area yes you scored big, other parts of the country from what i read here its about an average price which i find hard to even emagin.

There are 2 guys here that make under bed fuel cells for these trucks, fuel cell guy, and David Boyd, do a search on them and you'll learn a lot about it.

David boyd does a group buy about every 6 months, heres a couple of links to start.:

http://67-72chevytrucks.com/vboard/s...d.php?t=362307

http://67-72chevytrucks.com/vboard/s...d.php?t=197895

thanks for the info, I really appreciate it!

VA72C10 · 11-26-2010, 02:26 PM

Looks like a great truck already! Congrats!

travlinman · 11-26-2010, 02:37 PM

good looking truck. looks like its a 67 "small window" cab with the 73-up rear fenders.
but does look like someone already added power brakes which is nice.
its a good deal to me! to me id swap a couple things out and drive the sucker!!

BigMike608 · 11-26-2010, 03:29 PM

is it possible to just change out the rear fenders and bed step and not replace the entire bed? I like the steel bed floor being that I plan on spraying in a bedliner instead of having wood

travlinman · 11-26-2010, 03:31 PM

yup they just unbolt and pretty easy to swap.

BigMike608 · 11-26-2010, 03:42 PM

sweet thanks! guess i will be searching for some fenders

VA72C10 · 11-26-2010, 03:47 PM

Oh, and as mentioned....change out the air cleaner asap and look at replacing the rubber hoses for the fuel and the filter asap as well....the rubber hoses don't hold up to today's gas and can leak on the headers and really ruin your day

tonypaul · 11-26-2010, 04:03 PM

Congrats on your new purchase! You got a sweet deal! Tell your wife at this point no matter what you do to the truck it will only gain in value as opposed to purchasing a new truck and have it continuely decrease in value. With just a little work and a small investment off the right parts you could double your money very easy. Glad to have you aboard!

BigMike608 · 11-26-2010, 04:14 PM

thanks for the advice guys! for now I have it parked at my mom's house in East Texas and hopefully i can go get it in a few weeks and bring it back to DFW. Would it be easier to go to my local pick n pull to find all new hubs and everything i need to convert the front to 5 lug or check into ording something from lmc instead? to start off with I plan on finding some rallies to mount and ride for a while until I decide what to do long term. I been reading here on the forums with some of the difficulties mounting Coys so I might be leading more towards the Eagle Alloys 225 as my final selection

67chevy1series · 11-26-2010, 04:15 PM

you got your self a 67 ac cab man over here not very many 67 s have ac

BigMike608 · 11-26-2010, 04:15 PM

Quote:

Originally Posted by 67chevy1series

you got your self a 67 ac cab man over here not very many 67 s have ac

interesting... the title says 68

jay6891 · 11-26-2010, 05:32 PM

Small back window says 67. Lights on fenders say 68. Either or, you made a GREAT DEAL. and Welcome from Arkansas

11-26-2010, 02:48 AM	#1
BigMike608 Registered User Join Date: Oct 2010 Location: Dallas, TX Posts: 432	New Member - 68 Stepper Hello everyone, my name is Mike and I've been lurking around the forums for about a month now waiting until the chance that I could finally introduce myself. As of today I'm now the proud owner a nice little 68 Stepper. I was on my way to my mom's house this morning in East Texas for Thanksgiving and just as I entered the city limits this truck was just sitting there with a huge sale sign on it that caught my eye. I took my wife and kids to my mom's house, dropped them off, and went back to take a closer look at the truck. I took a quick walk around and looked inside just as it started to rain and I wrote down the number of the person that was selling it. I gave him a call a little after we finished eating Thanksgiving dinner and just before the Dallas Cowboys game came on. The owner agreed to meet me because I was only in town for today and later tonight I was heading back home to Dallas. I guess it was my lucky day because me and the owner ended up talking and having a great conversation and in the end we came to an agreement on the truck!!!! This turned out to be a great Thanksgiving!!!! Here are few pics, sorry they are so bad... I took them with my camera phone in the rain. And the 350 and powerglide automatic tranny drives GREAT!!!!

11-26-2010, 07:29 AM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: New Member - 68 Stepper WELCOME!!!Looks like a great start to a project.The rear fenders are later model but you probably know that after "lurking" for a month.What are your plans? __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

11-26-2010, 08:39 AM	#3
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: New Member - 68 Stepper Nice starter project. It looks like someone has already swapped to a 5-lug rear. Just put a 5-lug front disc conversion, and your good to go. What kind of plans do you have for it? __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

11-26-2010, 10:22 AM	#6
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: New Member - 68 Stepper Great looking truck, Welcome. Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

11-26-2010, 10:26 AM	#7
lt704 Registered User Join Date: Jun 2009 Location: Berkley, Massachusetts Posts: 235	Re: New Member - 68 Stepper Welcome to the group Mike, nice ride...we don't them find like that in Massachusetts. Good luck with your new truck...Russ

11-26-2010, 10:55 AM	#8
mrhino Account Suspended Join Date: Aug 2007 Location: USA Posts: 1,223	Re: New Member - 68 Stepper sweet little project Mike. those kind of stories are cool to hear about.

11-26-2010, 11:33 AM	#9
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: New Member - 68 Stepper Good looking truck. Drive it a while, enjoy it and figure out what you want to do with it. I am still trying to figure out what I want the end result to be on my trucks. I enjoy driving them to much to have them torn down for a long time. __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.

11-26-2010, 12:19 PM	#10
BigMike608 Registered User Join Date: Oct 2010 Location: Dallas, TX Posts: 432	Re: New Member - 68 Stepper thanks for the warm welcome everyone. I really dont have any big plans for it right now off the bat. My first tasks will be doing the front end conversion to 5 lug and changing out the wheels, nothing too fancy and getting that gas tank out the bed and underneath. I will have to find someone here in DFW to do the gas tank for me because i have absolutely no idea how to do this myself. I've decided to name the truck after my grandmother that passed away. I'm going to call it Beta Mae. As my grandmother got older the more and more she kept going and never seemed to quit. She grew stronger with age and that's exactly what this truck represents. I will have to have it and drive it for a while before I decide what i want for the long term goal. I think I'm going to keep it pretty stock and not get to wild with it because I like the old nostalgia of it and will most likely go with a nice black satin finish with some Coys.

11-26-2010, 12:44 PM	#11
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: New Member - 68 Stepper If the 1950 that is posted on the passenger's window is anywhere CLOSE to the price you paid.... even doubled....then you scored. Even if the motor blows next week. HOW SWEET!!!!! After I tried to figure out what's hanging off of the right side of your heater on the fire wall, I started to compare what you have and the pile of parts I started with this time...And my truck was a Texas truck, as well. These are tears of joy for you....really. No, really! Attached Images __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.

11-26-2010, 12:49 PM	#12
BigMike608 Registered User Join Date: Oct 2010 Location: Dallas, TX Posts: 432	Re: New Member - 68 Stepper Believe it or not I talked the guy down to $1700, so it I truly believe that I SCORED big time on this one!!!!! Wifey not too happy because it's so close to Christmas but I tried to explain to her that you just don't come across deals like this everyday!!!!! you have to strike while the iron is hot LOL.

11-26-2010, 02:26 PM	#15
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: New Member - 68 Stepper Looks like a great truck already! Congrats! __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-26-2010, 02:37 PM	#16
travlinman Registered User Join Date: Feb 2009 Location: stockton ca. Posts: 502	Re: New Member - 68 Stepper good looking truck. looks like its a 67 "small window" cab with the 73-up rear fenders. but does look like someone already added power brakes which is nice. its a good deal to me! to me id swap a couple things out and drive the sucker!! __________________ 94 ls swap silverado 65 Pontiac 78 c30 crew cab dually (parted and gone) 82 c30 crew cab dually ( now building ) 91 r30 crew cab dually (parted and gone) 69 swb-sold 71 lab sold all in progress......__ ..........._______ \|__\__ ..........\|__(O)______(O)] ........................

11-26-2010, 03:29 PM	#17
BigMike608 Registered User Join Date: Oct 2010 Location: Dallas, TX Posts: 432	Re: New Member - 68 Stepper is it possible to just change out the rear fenders and bed step and not replace the entire bed? I like the steel bed floor being that I plan on spraying in a bedliner instead of having wood

11-26-2010, 03:31 PM	#18
travlinman Registered User Join Date: Feb 2009 Location: stockton ca. Posts: 502	Re: New Member - 68 Stepper yup they just unbolt and pretty easy to swap. __________________ 94 ls swap silverado 65 Pontiac 78 c30 crew cab dually (parted and gone) 82 c30 crew cab dually ( now building ) 91 r30 crew cab dually (parted and gone) 69 swb-sold 71 lab sold all in progress......__ ..........._______ \|__\__ ..........\|__(O)______(O)] ........................

11-26-2010, 03:42 PM	#19
BigMike608 Registered User Join Date: Oct 2010 Location: Dallas, TX Posts: 432	Re: New Member - 68 Stepper sweet thanks! guess i will be searching for some fenders



Register or Log In To remove these advertisements.

11-26-2010, 03:47 PM	#20
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: New Member - 68 Stepper Oh, and as mentioned....change out the air cleaner asap and look at replacing the rubber hoses for the fuel and the filter asap as well....the rubber hoses don't hold up to today's gas and can leak on the headers and really ruin your day __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-26-2010, 04:03 PM	#21
tonypaul Registered User Join Date: Nov 2009 Location: Austin Tx Posts: 639	Re: New Member - 68 Stepper Congrats on your new purchase! You got a sweet deal! Tell your wife at this point no matter what you do to the truck it will only gain in value as opposed to purchasing a new truck and have it continuely decrease in value. With just a little work and a small investment off the right parts you could double your money very easy. Glad to have you aboard!

11-26-2010, 04:14 PM	#22
BigMike608 Registered User Join Date: Oct 2010 Location: Dallas, TX Posts: 432	Re: New Member - 68 Stepper thanks for the advice guys! for now I have it parked at my mom's house in East Texas and hopefully i can go get it in a few weeks and bring it back to DFW. Would it be easier to go to my local pick n pull to find all new hubs and everything i need to convert the front to 5 lug or check into ording something from lmc instead? to start off with I plan on finding some rallies to mount and ride for a while until I decide what to do long term. I been reading here on the forums with some of the difficulties mounting Coys so I might be leading more towards the Eagle Alloys 225 as my final selection

11-26-2010, 04:15 PM	#23
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: New Member - 68 Stepper you got your self a 67 ac cab man over here not very many 67 s have ac

11-26-2010, 05:32 PM	#25
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	Re: New Member - 68 Stepper Small back window says 67. Lights on fenders say 68. Either or, you made a GREAT DEAL. and Welcome from Arkansas __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.