VA 68 suburban parts/patches

[billsbowtie]

i couldn't sale it hole so i am parting it.
barn doors good driver shape $275.00
perty good body i will cut out patch panels and ship if not to large. let me know if you need a patch and i will give you a price. windshield and roof is very good shape.
i have a good tn title for it.
nice straight frame.
YOU CAN BUY WHATS LEFT OF IT FOR $400.00 OR $300.00 WITH OUT BARN DOORS.

[billsbowtie]

pass side was sanded to metel and now has surface rust.

[billsbowtie]

[billsbowtie]

barn door top henges they work good $45.00 shipped.

[DBear]

how are the sections in front of the rear wheel wells( at the bottom)?

[billsbowtie]

both sides have rust.

[DieselFJ]

I am looking for the floor section just inside the third door, It looks like from all the travel in and out of that door and the we carpet it rusted/wore the sheet metal right down. I wouldn't mind any section of floor as long as it is clean and has the ribs.

Thanks
Scott

[billsbowtie]

i will check and try to get a couple pic.s for you. it may be a day or 2 .

[DieselFJ]

Originally Posted by billsbowtie

i will check and try to get a couple pic.s for you. it may be a day or 2 .

Sound good, Thanks

Scott

[billsbowtie]

that piece is not very good either on mine.

[billsbowtie]

the ft. door piece has rust also.

[6772king]

how much would u want 4 a 8"x8" square cut around the filler neck?? also would u sell just the driver side barn door if so how much ,,,thanks Sean

[DieselFJ]

Originally Posted by billsbowtie

the ft. door piece has rust also.

Thanks for the picture, I will pass on the panels, was hoping for something a little cleaner.

Thanks for your time
Scott

[billsbowtie]

sean do you just need the outer piece or inner piece also?

[billsbowtie]

sean here is inner piece i am talking about.

[billsbowtie]

sean the door has had a small dent at 1 time you can see some bondo cracking in this pic. but over all perty soild.

[billsbowtie]

it has a little surface rust at bottom with 2 small rust holes where arrows are pointing $185.00 shipped to you for the door.

[6772king]

i just need the outer piece on the quarter,, I'll have to think about the door

[billsbowtie]

ok outer patch $25.00 plus $15.00 shipping.

[rondog4416]

how about drivers side sheet metat around taillite ? shipped to 98372 thanks ron

[6772king]

pm. sent

[billsbowtie]

ron how much do you need ? can you post a pic.? thanks bill

[rondog4416]

I need the flat area around taillite and backup lite on drivers side .thanks ron

[billsbowtie]

ron how about $40.00 shipped to you if i can get it off with any trouble?

[billsbowtie]

6772king i started cuting the piece out but messed it up. i damaged it around the gas neck hole.
if amyone wants whts left of the burb for $400.00 or $300.00 with out barn doors and henges.