![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Mar 2008
Location: Coggon, IA
Posts: 580
|
what to know about converting to 4x4 using 73+ running gear
i am converting my 71 swb frame to 4x4. what do i need to know to utilize the hardware off of a 73 or newer truck? obviously will have to install the mounting brackets to the frame. will the springs work? are the spring perches on the housings at the correct width or will they need to be removed and reinstalled? will i have an uneven stance front to rear? anything else?
Thanks, David |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: what to know about converting to 4x4 using 73+ running gear
The frames are different widths from what i understand so the spring mounts in the axle will have to be cut off and rewelded. I have read a couple threads on this in the 4X4 section since i have been on the board.
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
![]() |
![]() |
![]() |
#3 | |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: what to know about converting to 4x4 using 73+ running gear
Quote:
http://www.67-72chevytrucks.com/vboa...d.php?t=310493
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2008
Location: Coggon, IA
Posts: 580
|
Re: what to know about converting to 4x4 using 73+ running gear
diesel if both front and rear axle are off of a 73 or newer truck should they be the same width as each other?
Thanks! |
![]() |
![]() |
![]() |
#5 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: what to know about converting to 4x4 using 73+ running gear
I'm pretty sure the front is still a little wider than the rear in the 73 ups too. It's close, but stand behind your donor and look. I'm betting the front sticks out farther than the rear a little bit.
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|