Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-02-2011, 07:34 PM | #1 |
Registered User
Join Date: Aug 2010
Location: Alta Loma, CA
Posts: 610
|
Lots of assorted left over parts for sale in SoCal
I have several parts that are left over from my build. Let me know if you would like more/better pictures of anything.
1. Brake booster/master cyl/prop valve assy. This worked perfectly when removed about a week ago. The only thing I know is wrong is the fire wall seal is worn. I am asking $75 plus actual shipping. SOLD 2. Factory 1967 bench seat covered in a brand new red/black hounds-tooth cover. The cover is in perfect condition, but the foam underneath is original, so it is kinda' soft. I haven't had the cover off, so I don't know what the frame is like, but it is sturdy and usable. I am asking $200 plus actual shipping, although I would prefer pick-up, since it is so big. 3. Factory AC control unit. All levers work / switch worked when removed. The cables are still attached and seem decent. I am asking $75 plus actual shipping. SOLD 4. Factory stereo. I have no idea if it works and I have no interest in testing it. I am asking $25 plus shipping. SOLD 5. Full set of mechanical Equus gauges. The speedo and tach are 3 3/8" and the water temp, fuel level, oil pressure, and volts are all 2 1/16". They all functioned perfectly and includes the senders. There are no scratches or defects. The only issue is that the tach retaining ring is missing. These are sold at any Kragen/O'reilly, so if you have an issue then just buy a replacement there and put the part that is giving you problems in the package and return it. I am asking $200 plus shipping. All prices are negotiable, so make an offer.
__________________
67 5.3L Build Last edited by 67C10BUB; 01-20-2011 at 06:32 AM. |
01-02-2011, 07:53 PM | #2 |
Registered User
Join Date: Aug 2010
Location: Alta Loma, CA
Posts: 610
|
Re: Lots of assorted left over parts for sale in SoCal
I also have a bunch of factory AC/heater parts and a factory radiator fan shroud. Let me know what you are looking for and I can take pics.
__________________
67 5.3L Build |
01-02-2011, 08:33 PM | #3 |
Registered User
Join Date: Dec 2010
Location: Jesup,Iowa
Posts: 45
|
Re: Lots of assorted left over parts for sale in SoCal
That booster setup work on a 68 3/4 ton 2wd c20??
|
01-02-2011, 09:06 PM | #4 |
Registered User
Join Date: Aug 2010
Location: Alta Loma, CA
Posts: 610
|
Re: Lots of assorted left over parts for sale in SoCal
I honestly have no idea what trucks it will work on. It came off of a 67 1/2 ton. It is a 5 bolt pattern (4 in an evenly spaced rectangle arrangement and 1 more below the lower RH corner bolt (raised a bit to slide the steering column retainer). I could get pics of the bolt pattern and measure anything you need.
__________________
67 5.3L Build |
01-02-2011, 09:28 PM | #5 |
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: Lots of assorted left over parts for sale in SoCal
my dad has a 70 and wants to get an original radio to stick in the hole on the dash as he says ,and then wants to get a cheapo one from wal mart to stick under the seat and he found one with bad chrome for .99 beleive it or not but it is too far to ship ,he will never use this radio but he will just install it so what is the lowest on the radio that you can go?
|
01-02-2011, 09:33 PM | #6 |
Registered User
Join Date: Dec 2010
Location: Jesup,Iowa
Posts: 45
|
Re: Lots of assorted left over parts for sale in SoCal
Maybe someone will chime in but if not thats ok.
This is new to me so I'm not sure either. I got 4 bolts spaced approx. 4" apart but I'm not sure about the other one you mention. Just wondering if they are different setups for 1/2 & 3/4. |
01-02-2011, 10:11 PM | #7 |
Registered User
Join Date: Aug 2010
Location: Alta Loma, CA
Posts: 610
|
Re: Lots of assorted left over parts for sale in SoCal
Mine are @3.25" on center from side-to-side and @2.5" on center from top to bottom. If the measurements match your firewall bolts then I would think it would work. The 5th hole doesn't have to be used.
__________________
67 5.3L Build |
01-02-2011, 10:14 PM | #8 | |
Registered User
Join Date: Aug 2010
Location: Alta Loma, CA
Posts: 610
|
Re: Lots of assorted left over parts for sale in SoCal
Quote:
__________________
67 5.3L Build |
|
01-02-2011, 11:42 PM | #9 |
Registered User
Join Date: Apr 2009
Location: dunlow wv
Posts: 435
|
Re: Lots of assorted left over parts for sale in SoCal
is this fan shroud for a/c,how big is the hole for the fan,i have a serpentine belt set up,hole needs to be 20in. or bigger,thanks
__________________
72,2wd short bed cheyenne,350,350trans,air,tilt,tach,posi 373 gears 70 nova 5.3,350 trans 80 z28 350,350,trans,bought new 03 cat. 06 gmc swb ext cab |
01-03-2011, 12:05 AM | #10 |
GobbleStalker Calls
Join Date: Aug 2010
Location: Port Hope, Ontario
Posts: 653
|
Re: Lots of assorted left over parts for sale in SoCal
If you have the knobs for the radio I will take it.
Kevin
__________________
72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride ) |
01-03-2011, 12:19 PM | #11 |
Registered User
Join Date: Aug 2010
Location: Alta Loma, CA
Posts: 610
|
Re: Lots of assorted left over parts for sale in SoCal
The shroud has a 21" hole. It is in near perfect condition (no cracks or holes) and is the original type material (plastic/fiberglass looking stuff). I would like to get $50 plus shipping.
__________________
67 5.3L Build |
01-03-2011, 12:20 PM | #12 |
Registered User
Join Date: Aug 2010
Location: Alta Loma, CA
Posts: 610
|
Re: Lots of assorted left over parts for sale in SoCal
I can't seem to find the knobs right now, but I will keep an eye out in my pile of junk and post if I come across them.
__________________
67 5.3L Build |
01-06-2011, 07:03 AM | #13 |
Registered User
Join Date: Aug 2010
Location: Alta Loma, CA
Posts: 610
|
Re: Lots of assorted left over parts for sale in SoCal
ttt. Nobody needs any of these parts. They seem like very reasonable prices to me. I also have a blazer gas tank SOLD, OEM trans X-member, stock height coil springs (front and back), OEM pan-hard bar, and front disc brake setup (spindles, calipers, rotors, etc).
__________________
67 5.3L Build Last edited by 67C10BUB; 01-10-2011 at 08:33 PM. |
01-06-2011, 10:52 AM | #14 |
Registered User
Join Date: Jun 2002
Location: Fort Worth, TX
Posts: 920
|
Re: Lots of assorted left over parts for sale in SoCal
What would the shipping be on the mc to fort worth, tx 76112? and do you still have the radio?
|
01-06-2011, 05:48 PM | #15 |
Registered User
Join Date: Aug 2010
Location: Alta Loma, CA
Posts: 610
|
Re: Lots of assorted left over parts for sale in SoCal
It looks like it would be about $25 and yes, I still have the radio.
__________________
67 5.3L Build |
01-06-2011, 11:41 PM | #16 |
Registered User
Join Date: Dec 2010
Location: Pahrump, Nevada
Posts: 451
|
Re: Lots of assorted left over parts for sale in SoCal
I will take the fan shrould for $40 and I will pick it up? please PM if you are a go with pick up info.
Thanks, CORSAIR
__________________
"The Can't Family Lives Across The Street" |
01-06-2011, 11:43 PM | #17 |
Registered User
Join Date: Dec 2010
Location: Pahrump, Nevada
Posts: 451
|
Re: Lots of assorted left over parts for sale in SoCal
Tell me about the Blazer tank may be interested in it along with shroud?
__________________
"The Can't Family Lives Across The Street" |
01-07-2011, 12:05 AM | #18 |
is a fungineer
Join Date: Jan 2009
Location: Bakersfield, CA
Posts: 795
|
Re: Lots of assorted left over parts for sale in SoCal
Can I get more info on the front disc brake setup?
Thanks.
__________________
2003 S10, 2.2 auto- the daily driver, currently with a 2"/2" drop and some minor engine bolt-ons 1978 Impala 2-door, race 350/T350 - the new race car, in progress 1968 Chevy C10 longbed- 3/5 drop, currently undergoing a heart transplant |
01-07-2011, 06:53 AM | #19 |
Registered User
Join Date: Aug 2010
Location: Alta Loma, CA
Posts: 610
|
Re: Lots of assorted left over parts for sale in SoCal
It was the setup that the PO put on. It seems to be an upgraded '73-'87 setup (judging by the ball-joint sizes). It has the single piston calipers and the 1 1/4" thick rotors. They are on stock height spindles and the rotors/pads look like new )except for the surface rust and they are missing the dust caps. The bearings seem good still. I would like to get $100 for the whole setup. I could take pics tomorrow if you like.
__________________
67 5.3L Build |
01-07-2011, 06:55 AM | #20 |
Registered User
Join Date: Aug 2010
Location: Alta Loma, CA
Posts: 610
|
Re: Lots of assorted left over parts for sale in SoCal
The tank is a stock 67 - 72 blazer tank. It is in decent condition, but the gas that came out of it had a tint of orange, so I would flush it and clean out the inside. It does not leak. I'll post pics of that tomorrow as well.
__________________
67 5.3L Build |
01-07-2011, 02:40 PM | #21 |
Registered User
Join Date: Aug 2010
Location: Alta Loma, CA
Posts: 610
|
Re: Lots of assorted left over parts for sale in SoCal
Here are some pics of the brakes, gas tank, and trans X-member.
__________________
67 5.3L Build |
01-07-2011, 02:41 PM | #22 |
Registered User
Join Date: Aug 2010
Location: Alta Loma, CA
Posts: 610
|
Re: Lots of assorted left over parts for sale in SoCal
The other caliper is there. I just took it off the spindle.
__________________
67 5.3L Build |
01-07-2011, 03:02 PM | #23 |
needs more $$$
Join Date: Mar 2004
Location: Sacramento
Posts: 1,936
|
Re: Lots of assorted left over parts for sale in SoCal
How much for the mc assembly shipped to 95822 (Sac, CA)? I take it the prop valve is for a disc/drum set up?
__________________
1970 2wd Blazer |
01-07-2011, 04:50 PM | #24 |
Registered User
Join Date: Dec 2010
Location: Mars Hill, NC
Posts: 1,994
|
Re: Lots of assorted left over parts for sale in SoCal
interested in booster, brakes, and cross member if they get to me...
|
01-07-2011, 05:02 PM | #25 |
Registered User
Join Date: Aug 2010
Location: Alta Loma, CA
Posts: 610
|
Re: Lots of assorted left over parts for sale in SoCal
It was hooked up to a disc/drum system on my truck and it worked fine, but I don't know for sure if that's what it was designed for since it was on the truck when I bought it. I'll take $75 shipped to you if you are interested.
__________________
67 5.3L Build |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|