Another 402 BB question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

John Pasinski · 01-04-2011, 07:49 PM

I have the OE 402 in my '72 C-30. Would one of you fellas who own a 402 give me the crank case dip stick measurements? I need the length from the tip to the lip of the cup which covers the tube. The measurement from the tip, to the "add a quart" mark, and from the tip to the full mark. I'm trying to determine if I have the correct stick in this engine. Thanks............

CORSAIR · 01-05-2011, 11:52 PM

John,
I just measured my 402 dip stick and reads as follows
Overall length 21" (cup to end of stick)
Cup to Add line 20"
Cup to full line 19"

I hope this will help.

Thanks,
CORSAIR

01-04-2011, 07:49 PM	#1
John Pasinski Registered User Join Date: Aug 2007 Location: orlando Posts: 456	Another 402 BB question I have the OE 402 in my '72 C-30. Would one of you fellas who own a 402 give me the crank case dip stick measurements? I need the length from the tip to the lip of the cup which covers the tube. The measurement from the tip, to the "add a quart" mark, and from the tip to the full mark. I'm trying to determine if I have the correct stick in this engine. Thanks............ __________________ A man's thoughts devise his ways; but it's GOD that directs his steps.

01-05-2011, 11:52 PM	#2
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Another 402 BB question John, I just measured my 402 dip stick and reads as follows Overall length 21" (cup to end of stick) Cup to Add line 20" Cup to full line 19" I hope this will help. Thanks, CORSAIR __________________ "The Can't Family Lives Across The Street"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.