76 chevy spindle swap with a 68? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jordans68 · 01-15-2011, 07:18 PM

just wondering if the spindle and disc brakes off my buddys 76 chevy pickup will work in my 68 c10? and also the automatic crossmember?

**lolife99** · 01-15-2011, 07:56 PM

The spindles will work with a balljoint and tie rod swap.
Can you get all of the front end or just the spindles?

Jordans68 · 01-17-2011, 07:09 PM

its a rolling chassis and they want $50 for it

**lolife99** · 01-17-2011, 07:20 PM

Well worth the money.
Get it all.
Especially the steering linkage and steering box.
You will have everything you need except the master cylinder and prop valve,... unless it's still on it.

Jordans68 · 01-17-2011, 07:26 PM

its all there the bodys sitting on the ground next to the truck i figured it would be alot cheaper then buying the kit. but thanks i appreciate the info

PHAT TONY · 01-17-2011, 09:21 PM

I'd swap the whole crossmember; less work cause except for a little steering box clearance it bolts in place of the original c-member.

Jordans68 · 01-17-2011, 10:38 PM

thats what i was thinking but i wasn't sure if it would fit right in or not i havent had the time to measure it up yet, and it has v8 springs in it that would get me by untill i get lowering ones

01-15-2011, 07:18 PM	#1
Jordans68 Registered User Join Date: Sep 2010 Location: foster,rhode island Posts: 6	76 chevy spindle swap with a 68? just wondering if the spindle and disc brakes off my buddys 76 chevy pickup will work in my 68 c10? and also the automatic crossmember?

01-15-2011, 07:56 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: 76 chevy spindle swap with a 68? The spindles will work with a balljoint and tie rod swap. Can you get all of the front end or just the spindles? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-17-2011, 07:09 PM	#3
Jordans68 Registered User Join Date: Sep 2010 Location: foster,rhode island Posts: 6	Re: 76 chevy spindle swap with a 68? its a rolling chassis and they want $50 for it

01-17-2011, 07:20 PM	#4
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: 76 chevy spindle swap with a 68? Well worth the money. Get it all. Especially the steering linkage and steering box. You will have everything you need except the master cylinder and prop valve,... unless it's still on it. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-17-2011, 07:26 PM	#5
Jordans68 Registered User Join Date: Sep 2010 Location: foster,rhode island Posts: 6	Re: 76 chevy spindle swap with a 68? its all there the bodys sitting on the ground next to the truck i figured it would be alot cheaper then buying the kit. but thanks i appreciate the info

01-17-2011, 09:21 PM	#6
PHAT TONY Registered User Join Date: Aug 2008 Location: Red Deer ab canada Posts: 1,250	Re: 76 chevy spindle swap with a 68? I'd swap the whole crossmember; less work cause except for a little steering box clearance it bolts in place of the original c-member. __________________ 1972 factory 2 Wheel Drive Blazer-Sold 1972 K10 4X4-Sold 1971 Chevrolet Cheyenne/10-Sold 1970 Chevrolet C/10-Sold 1968 GMC 4X4-Project 1968 Chevrolet C/10 Pro Street 1970 GMC 3/4 Ton-Parts 1997 2WD 2DR Yukon-Sweet http://67-72chevytrucks.com/vboard/s...d.php?t=335664

01-17-2011, 10:38 PM	#7
Jordans68 Registered User Join Date: Sep 2010 Location: foster,rhode island Posts: 6	Re: 76 chevy spindle swap with a 68? thats what i was thinking but i wasn't sure if it would fit right in or not i havent had the time to measure it up yet, and it has v8 springs in it that would get me by untill i get lowering ones

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.