87 crew cab 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kylecoyote · 01-26-2011, 05:17 PM

I just picked this truck up and am looking for something cheap for the interior. Does anybody have pictures of a setup from a suburban. I dont think the rears from a sub will come close to swapping the floors look way to different. What about if I used two sets of front buckets with consoles? Any help is welcomed also what about the threshold plates?

Hulk Will Smash · 01-26-2011, 06:08 PM

Down here there's TONS of these trucks getting parted out. I picked up a really nice, clean stock back seat for my truck off Craigslist for around $50. I've got 2005 split bench in the front of mine, but I've been thinking about picking up an '89 - '91 Burb for parts and one of the swaps may be to go to the Burb buckets.

Good luck dude. Looks like a lot of potential in that truck.

Prerunner1982 · 01-26-2011, 07:40 PM

I don't know for sure but by the looks of it, a bench seat from a regular cab appears it would fit your CC both front and rear.

kylecoyote · 01-29-2011, 01:17 PM

Yea i know the regular cab seats swap in but they are alot harder to come by in good shape than burb seats around here.

firenuttz · 01-30-2011, 09:20 AM

heres my setup with some astro van seats

motornut · 01-30-2011, 10:49 AM

the burb rear bolts to the lip and requires the floor supports
and the seats need a lock to hold them upright
the extra front seats looks like a much closer/easier job
may just need to bend seats tracks
and the extra inside floor bracket for the seats

48cj2a · 01-30-2011, 01:14 PM

Quote:

Originally Posted by Prerunner1982

I don't know for sure but by the looks of it, a bench seat from a regular cab appears it would fit your CC both front and rear.

I think the only difference in the crew cab seats is the rear seat tilts forward for behind seat access, otherwise the seats are identical. So a 2 door seat should be same as rear seat in crew.

firenuttz · 01-30-2011, 06:51 PM

Quote:

Originally Posted by 48cj2a

I think the only difference in the crew cab seats is the rear seat tilts forward for behind seat access, otherwise the seats are identical. So a 2 door seat should be same as rear seat in crew.

i put one in the back of my dads crew and all i did was bend the rear mounting tabs up

01-26-2011, 05:17 PM	#1
kylecoyote Registered User Join Date: Feb 2005 Location: Southwest Washington State Posts: 28	87 crew cab 4x4 I just picked this truck up and am looking for something cheap for the interior. Does anybody have pictures of a setup from a suburban. I dont think the rears from a sub will come close to swapping the floors look way to different. What about if I used two sets of front buckets with consoles? Any help is welcomed also what about the threshold plates? __________________ Original is the best

01-26-2011, 06:08 PM	#2
Hulk Will Smash Registered User Join Date: Apr 2006 Location: Huntington Beach, CA Posts: 492	Re: 87 crew cab 4x4 Down here there's TONS of these trucks getting parted out. I picked up a really nice, clean stock back seat for my truck off Craigslist for around $50. I've got 2005 split bench in the front of mine, but I've been thinking about picking up an '89 - '91 Burb for parts and one of the swaps may be to go to the Burb buckets. Good luck dude. Looks like a lot of potential in that truck. __________________ '87 R30 Crew Cab Dually It's 11 PM, do you know where your IAC pintle is?

01-26-2011, 07:40 PM	#3
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	Re: 87 crew cab 4x4 I don't know for sure but by the looks of it, a bench seat from a regular cab appears it would fit your CC both front and rear. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call Last edited by Prerunner1982; 01-26-2011 at 07:40 PM.

01-29-2011, 01:17 PM	#4
kylecoyote Registered User Join Date: Feb 2005 Location: Southwest Washington State Posts: 28	Re: 87 crew cab 4x4 Yea i know the regular cab seats swap in but they are alot harder to come by in good shape than burb seats around here. __________________ Original is the best

01-30-2011, 09:20 AM	#5
firenuttz 2lo4me/ntlonuf/ntfstnf Join Date: Aug 2010 Location: Newport News, VA Posts: 239	Re: 87 crew cab 4x4 heres my setup with some astro van seats Attached Images __________________ 62 GMC swb fleetside~ project: still undecided 84 Chevy 4wd crew cab 8 inch lift and 37" goodyear h1 pulloffs, still rockin the old mans former plate 2LO4ME 65 chevy 1 ton panel~ bagged/bodied duramax plans slowly in progress... 02 Silverado cclb duramax~ sas'd "bro" truck with more rust than imagineable...

01-30-2011, 10:49 AM	#6
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: 87 crew cab 4x4 the burb rear bolts to the lip and requires the floor supports and the seats need a lock to hold them upright the extra front seats looks like a much closer/easier job may just need to bend seats tracks and the extra inside floor bracket for the seats Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 Last edited by motornut; 01-30-2011 at 10:50 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.