OR Making room for new project - Parts for sale

[Mt Man Chad]

I will be adding parts as the day goes on as well as photos. larger items are for sale locally as well. Prices do not include shipping. If prices seem out of line make me a offer. Priority mail prefered or UPS can do Grey hound on larger items. Will post pics of all parts requested.

I6 250 or 292 Original offset oil bath air cleaner, very hard to find. Includes stock block support and spacer - excellent condition $120
I6 offset air cleaner assy for power breaks $35 Sale pending Sharpie
Inline 6 shroud & 4 blade fan $35
I6 power steering bracket bolts on bottom of pump, early style $12 SOLD 72shortstep
I6 clutch engine mount $15 SOLD 72shortstep
Hurst Indy H 3 speed floor shifter $30 SOLD to 68chevyfuelie
67-68 rear view mirror $15
Engine mounts small block $20
Engine mounts 250 I6 $20
69-72 heat shield inner and outer w/riser for small block, cautic dipped and painted $50
Brand new aftermarket AM/FM with aux inputs fits stock dash. I have the knobs and wiring and instructions just not in picture $160 Sold Sharpie
71-72 Chevy 1/2 ton dog dish hub cap set - white/blue bow tie $85
67 dash center, includes ashtray and ignition switch $25 SOLD Fesser
68-72 Dash center section cut from dash $20 SOLD ROU
GMC headlight harness complete w/marker light. one wire cut at very end Green to horn $40 SOLD to 68chevyfuelie
Clutch linkage for small block - frame mount, Z bar, clutch fork, clutch rod 20” $45 Sold Local
Step side wheel wells no bondo - $75
(2) GMC core supports clean $75 both sold Local
68 Chevy/68-72 GMC PS after market fender like new $60
68 Chevy/68-72 GMC PS original fender $75 Sold Local
Trailing arms no rust, caustic dipped and painted $100 + shipping
SWB Steel bed floor $200
Custon Camper script emblums $30 Sold Sharpie
Custom Camper wiring harness $40
Chevy fleet side tailgate $100 Sold Local
GMC fleet side tailgate 68-72 $80 Sold Local
Radio delete plate - dark blue $25 Sold Sharpie
(2) 67-68 grill gravel guards clean $30
69-72 GMC hood letters - $15
69-70 C-10 fender emblems - $10
67-72 Chevy headlight buckets - $15

[sharpie1972]

Hi Chad, I'll take the delete if it has clips, the $35 air cleaner setup, and the custom camper emblems if they don't have pits and the studs are good. I also have a buddy looking for that style of radio. He needs a speaker as well. Thanks, Sharpie

[CC69Rat]

On the 68 PS Fender (GM) Do you have pics? Is the front cup pretty good? I'm looking for good rust free (as possible) .. i know, the PS is tough to find. shipping to 37421?

Thanks.

[hoss67]

I will get in line if CC69Rat passes on the fender pending pics. Shipping to 39218. Thanks Randy

[Mt Man Chad]

Sharpie - Think I have a brand new dual speaker for the radio for stock dash location. Need to locate it let me dig it up for another $30 I'll get some pics of parts for you today.

72BlckButy - Pics of 250 bottom Power steering bracket 68-72 style.
And I6 clutch engine mount

[sharpie1972]

Hi Chad, thanks. I'm also interested in both tailgates pending condition. Is the custom camper harness inside cab? Sharpie

[lolife99]

Any pictures of these?
"Step side wheel wells and steps clean no bondo - $75"

[Mt Man Chad]

I'm going to take pics of all of it right now, I'll be back in a hour or two.
Aftermarket 68 fender shown.

[Fesser]

I'll jump in line on the passenger fender. I'll aslo take the center dash center section. Frank

[matthew79]

second in line on the radio. thanks

[CrewCab59]

Pics of P/S finder,GMC coresupport,GMC tail ( next in line ) .

Thanks

[72BlckButy]

Would like to see:

I6 power steering bracket bolts on bottom of pump, early style $12

[Mt Man Chad]

Back out pulling parts, more pics posted soon.
PM me if you have specific questions regarding parts posted.

[jorgensensc]

Can you do me a crazy favor? I have that exact same radio, but I'm missing the harness. Will you give me a pic of the harness and pinout for where the wires go on the connector? Mine came with the truck? But the radio gives no indication of the wire pinout. Thanks alot! It will really help me out!
Shawn
Posted via Mobile Device

[Mt Man Chad]

Jorgensensc - Will do!

The step side wheel wells and steps look way worse that they are, I can get details pics if requested. The previous owner painted black over the original bronze. I'll take a couple more pics of the small dings in them.

[STP67-72]

Interested in rear stepside fenders. Like to know more about them. Better pictures of drivers fender. Fender lip.

[CC69Rat]

Is the blue fender (in the picture with the AM fender) the GM 68 PS? The pictures showing the cup / back side of the fender .. is that it?

[Mt Man Chad]

Yes those inner shots (gold paint) are the bottoms of the original 68 chevy fender.
I used it as a test panel for setup of my HVLP gun last summer. I might sand it down before I post the pics. It's currently blue/white and primer with a few runs in the paint.
I want people to know what they are getting before sending anything out!

[lolife99]

How much for the stepside steps shipped to 65251 in MIssouri?

[gsd66nova]

Hello, Intrested in one of the gmc rad. supports. Can you get some pics of the passenger side lower section? Also will you ship it?
I would also like to get in line for the radio delete plate if sharpie doesn't take it.


Thanks, Shane.

[BardonRedDeath]

how much for the stepside fenders and steps shipped to 57703?

[PICKMUP]

I will take the gmc rad spt, locally,IF you don't want to ship. Would like to see the RH lower tray if it is as good as the LH pictured.

[CC69Rat]

Mt Man - Any significant dents or damage to the 68 GM PS Fender? Is it pretty straight? If you're ok with shipping it to 37421 (Maybe Greyhoud?) There's a terminal right down the road from my office. Just let me know a total with shipping and I'll get the money over to you. Are you ok with Paypal? PM if you prefer. As long as it's good and straight, no bondo, something I could blast and cleanup, etc. I'll commit to buy.

Thanks.

[STP67-72]

Still interested in rear fenders. Let me know. Thanks

[sharpie1972]

Hi Chad, radio and speaker look good. I'm not familiar with these units. Do they use the factory radio harness or do they come with their own? Still interested in the other parts as well when you have time for pics. Thanks, Sharpie