|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-31-2011, 10:09 AM
|
#1 |
|
Retired Air Force Veteran
 
Join Date: Aug 2007
Location: Pembroke Pines, Florida 33024
Posts: 1,808
|
Question about Tach Harness
In this quest to assemble a Tach/Vac dash, Ive had a million questions and a bunch of you guys have really helped me out a bunch. Thanks.
With that being said, I have one more question about the Tach Harness. I just ordered a new (repop) PCB for a Tach Dash. I realize the tach harness is needed to go directly to the dizzy. I have an aftermarket harness with 1 single purple wire labeled tach. Can I use this wire to connect the factory tach or is the tach harness absolutly needed? Thanks Harry
__________________
Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop  Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
