49 chev project truck minus trans for sale cheap(offers???) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

twistedmetal · 03-15-2003, 10:51 PM

this truck is half ton swb and requires lots of attention,lots of parts there for someone fixing one up.Make me offers Guys.I do not have to have it removed,been sitting for many years,just simply want to see someone get some use out of either the parts or restore it.

Quote:

"What???too many projects?I'll win the lottery someday,youll see,i'll get the fleet done"

twistedmetal · 03-15-2003, 10:54 PM

another pic

dubie · 03-17-2003, 01:06 PM

How much do you want for it?? Is there much body damage or rust??

*Slams_58* · 04-01-2003, 06:59 PM

Did you happen to get anymore pics of this beast yet

dubie · 04-02-2003, 10:13 AM

damn i musta posted that reply at home and under the wifes name

twistedmetal · 04-02-2003, 11:16 PM

Hey Dubie no more pix yet,by tomorrow i should have a good pic with 2 feet of snow on her again

dubie · 04-03-2003, 10:00 AM

I heard that you were supposed to get over 12" of snow last night or today.. Did it arrive yet? We only got 7" over the past few days.

twistedmetal · 04-03-2003, 11:11 PM

woo hoo got 3" right now,still falling right now,poor visibility.was gonna take a tear on the sled but i would imagine the culverts are hungry so keeping it put.

dubie · 04-11-2003, 04:38 PM

Any new pics on this beast yet bud?

twistedmetal · 04-12-2003, 09:30 PM

my 85 silverado got stole thursday,found it yesterday at Sandy Bay,luckily not burnt and minimal damage.heading out west on a trip wednesday to pick up another truck even though this one is ok,will likely post more on sunday next week.

dubie · 04-15-2003, 10:29 AM

That sucks man!!! Show us what you bought when you get back. And I am still interested in your 49

dubie · 04-28-2003, 04:07 PM

I see you are back with your new toy. I hate to be a pest, but do you happen to have any new pics of your 49?

twistedmetal · 04-29-2003, 12:53 AM

hey dubie,no pix yet,as for the truck the one in kelowna fell through and after 2 weeks of searching everywhere,i found this one locally,will try to get more pics by the end of the week

dubie · 04-30-2003, 04:24 PM

sounds good, thanks

dubie · 05-16-2003, 09:14 AM

i was gone all last week, any new pics of that 49 yet?

68_GMC_910 · 05-19-2003, 01:40 PM

hey, twisted metal... ya wanna part it out by any chance? I might be interested if I buy this '51 GMC I'm considering rodding this winrter.

68_GMC_910 · 05-19-2003, 01:44 PM

oops! just read your sig so I take that as a yes... in which case I gotta ask ya what condition is the passenger side running board in? what kind of engine does it have and last but not least where are you located in Manitoba?

dubie · 05-20-2003, 02:32 PM

He's in Portage La Prairie. It looks like it has some nice parts on it for your 51

JHickson6 · 05-22-2003, 12:29 AM

hmmm, how much do you want for it if it's still for sale? oh an how bad is the cancer on her?

Thanks
Jared

dubie · 05-22-2003, 08:52 AM

I believe he said he wants $200 for it, but don't quote me on that

03-15-2003, 10:54 PM	#2
twistedmetal Take it to the limit Join Date: Mar 2003 Location: Manitoba, Canada Posts: 145	another pic Attached Images __________________ 1995 GMC SLE Ext cab 4X4 Z-71 loaded daily driver 87 k25 Fully Loaded inc captain buckets and console,12" susp lift,3" body lift 42"swampers 66 Cutlass 2dr hardtop currently undergoing frame off 55 chev 2dr hardtop awaiting attention 85 Chev silverado 1/2 ton loaded,daily driver(stolen) 80 chev silverado 1/2 ton farm truck 87 S-jimmy V-8,lowered ,Parting out 49 Chev 1/2 parting out parting numerous 73-80 chev trucks 01 Polaris edge X (highly modified) 58 NSU Prima scooter awaiting total restoration

03-17-2003, 01:06 PM	#3
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	How much do you want for it?? Is there much body damage or rust?? __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

04-02-2003, 10:13 AM	#5
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	damn i musta posted that reply at home and under the wifes name __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

04-02-2003, 11:16 PM	#6
twistedmetal Take it to the limit Join Date: Mar 2003 Location: Manitoba, Canada Posts: 145	Hey Dubie no more pix yet,by tomorrow i should have a good pic with 2 feet of snow on her again __________________ 1995 GMC SLE Ext cab 4X4 Z-71 loaded daily driver 87 k25 Fully Loaded inc captain buckets and console,12" susp lift,3" body lift 42"swampers 66 Cutlass 2dr hardtop currently undergoing frame off 55 chev 2dr hardtop awaiting attention 85 Chev silverado 1/2 ton loaded,daily driver(stolen) 80 chev silverado 1/2 ton farm truck 87 S-jimmy V-8,lowered ,Parting out 49 Chev 1/2 parting out parting numerous 73-80 chev trucks 01 Polaris edge X (highly modified) 58 NSU Prima scooter awaiting total restoration

04-03-2003, 10:00 AM	#7
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	I heard that you were supposed to get over 12" of snow last night or today.. Did it arrive yet? We only got 7" over the past few days. __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

04-01-2003, 06:59 PM	#4
Slams_58 Account Suspended Join Date: May 2002 Location: I let ya know as soon as I know Posts: 3,593	Did you happen to get anymore pics of this beast yet

04-03-2003, 11:11 PM	#8
twistedmetal Take it to the limit Join Date: Mar 2003 Location: Manitoba, Canada Posts: 145	woo hoo got 3" right now,still falling right now,poor visibility.was gonna take a tear on the sled but i would imagine the culverts are hungry so keeping it put. __________________ 1995 GMC SLE Ext cab 4X4 Z-71 loaded daily driver 87 k25 Fully Loaded inc captain buckets and console,12" susp lift,3" body lift 42"swampers 66 Cutlass 2dr hardtop currently undergoing frame off 55 chev 2dr hardtop awaiting attention 85 Chev silverado 1/2 ton loaded,daily driver(stolen) 80 chev silverado 1/2 ton farm truck 87 S-jimmy V-8,lowered ,Parting out 49 Chev 1/2 parting out parting numerous 73-80 chev trucks 01 Polaris edge X (highly modified) 58 NSU Prima scooter awaiting total restoration

04-11-2003, 04:38 PM	#9
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	Any new pics on this beast yet bud? __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

04-12-2003, 09:30 PM	#10
twistedmetal Take it to the limit Join Date: Mar 2003 Location: Manitoba, Canada Posts: 145	my 85 silverado got stole thursday,found it yesterday at Sandy Bay,luckily not burnt and minimal damage.heading out west on a trip wednesday to pick up another truck even though this one is ok,will likely post more on sunday next week. __________________ 1995 GMC SLE Ext cab 4X4 Z-71 loaded daily driver 87 k25 Fully Loaded inc captain buckets and console,12" susp lift,3" body lift 42"swampers 66 Cutlass 2dr hardtop currently undergoing frame off 55 chev 2dr hardtop awaiting attention 85 Chev silverado 1/2 ton loaded,daily driver(stolen) 80 chev silverado 1/2 ton farm truck 87 S-jimmy V-8,lowered ,Parting out 49 Chev 1/2 parting out parting numerous 73-80 chev trucks 01 Polaris edge X (highly modified) 58 NSU Prima scooter awaiting total restoration

04-15-2003, 10:29 AM	#11
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	That sucks man!!! Show us what you bought when you get back. And I am still interested in your 49 __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

04-28-2003, 04:07 PM	#12
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	I see you are back with your new toy. I hate to be a pest, but do you happen to have any new pics of your 49? __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

04-29-2003, 12:53 AM	#13
twistedmetal Take it to the limit Join Date: Mar 2003 Location: Manitoba, Canada Posts: 145	hey dubie,no pix yet,as for the truck the one in kelowna fell through and after 2 weeks of searching everywhere,i found this one locally,will try to get more pics by the end of the week __________________ 1995 GMC SLE Ext cab 4X4 Z-71 loaded daily driver 87 k25 Fully Loaded inc captain buckets and console,12" susp lift,3" body lift 42"swampers 66 Cutlass 2dr hardtop currently undergoing frame off 55 chev 2dr hardtop awaiting attention 85 Chev silverado 1/2 ton loaded,daily driver(stolen) 80 chev silverado 1/2 ton farm truck 87 S-jimmy V-8,lowered ,Parting out 49 Chev 1/2 parting out parting numerous 73-80 chev trucks 01 Polaris edge X (highly modified) 58 NSU Prima scooter awaiting total restoration

04-30-2003, 04:24 PM	#14
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	sounds good, thanks __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

05-16-2003, 09:14 AM	#15
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	i was gone all last week, any new pics of that 49 yet? __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

05-19-2003, 01:40 PM	#16
68_GMC_910 what would Neal do? Join Date: Sep 2002 Location: Winnipeg, Manitoba, Canada Posts: 150	hey, twisted metal... ya wanna part it out by any chance? I might be interested if I buy this '51 GMC I'm considering rodding this winrter. __________________ 1968 GMC 910 Long Step 250/3onTree 1969 Chevy C10 longfleet, 350/350



Register or Log In To remove these advertisements.

05-19-2003, 01:44 PM	#17
68_GMC_910 what would Neal do? Join Date: Sep 2002 Location: Winnipeg, Manitoba, Canada Posts: 150	oops! just read your sig so I take that as a yes... in which case I gotta ask ya what condition is the passenger side running board in? what kind of engine does it have and last but not least where are you located in Manitoba? __________________ 1968 GMC 910 Long Step 250/3onTree 1969 Chevy C10 longfleet, 350/350

05-20-2003, 02:32 PM	#18
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	He's in Portage La Prairie. It looks like it has some nice parts on it for your 51 __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

05-22-2003, 12:29 AM	#19
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	hmmm, how much do you want for it if it's still for sale? oh an how bad is the cancer on her? Thanks Jared __________________ My Rides 1967 C10 In Pieces for now 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!!

05-22-2003, 08:52 AM	#20
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	I believe he said he wants $200 for it, but don't quote me on that __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.