Small block a/c brackets ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

canso · 03-18-2003, 08:23 PM

I don't have the original a/c brackets or compressor. I am wondering if anyone has used ones off of some other Chev application. Most of the 80's chev vehicles were on the drivers side. I want to find something with small block brackets on the passengers side. I have a new engine with no brackets and I know I will probably have to go to the long water pump, any ideas. Thanks

Hutch · 03-18-2003, 08:50 PM

See if someone on the board can supply you with the original ones including the crank pully. You can't beat original GM.
I belive that there is aftermarket stuff ou there but I have not used it myself.
Try this link to get and idea:
http://www.alangrovecomponents.com/

Have Fun

JimKshortstep4x4 · 03-18-2003, 08:54 PM

If you want the compressor on the passengers side then you will probably want to go with the short water pump setup as I am not aware of any long water pump setups with the compressor on the right.

Post a WTB on the parts board and try to get a full set. Piecing a set together is a chore sometimes.

Jim

Class of 69 · 03-18-2003, 09:27 PM

Go to www.classicindustries.com they have every bracket and pulley GM produced for these trucks in reproduction replacement parts. They even have the original a-6 compressor available for R-12 or R-134A They give a brief description of where they mount, and what years they fit. Happy Hunting

03-18-2003, 08:23 PM	#1
canso Registered User Join Date: Jun 2001 Posts: 92	Small block a/c brackets ? I don't have the original a/c brackets or compressor. I am wondering if anyone has used ones off of some other Chev application. Most of the 80's chev vehicles were on the drivers side. I want to find something with small block brackets on the passengers side. I have a new engine with no brackets and I know I will probably have to go to the long water pump, any ideas. Thanks

03-18-2003, 08:50 PM	#2
Hutch Registered User Join Date: Oct 2001 Location: Grapevine, Tx. Posts: 2,142	See if someone on the board can supply you with the original ones including the crank pully. You can't beat original GM. I belive that there is aftermarket stuff ou there but I have not used it myself. Try this link to get and idea: http://www.alangrovecomponents.com/ Have Fun __________________ John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS

03-18-2003, 09:27 PM	#4
Class of 69 Registered User Join Date: Mar 2003 Location: Stillwater MN Posts: 1,166	AC brackets & pulley's Go to www.classicindustries.com they have every bracket and pulley GM produced for these trucks in reproduction replacement parts. They even have the original a-6 compressor available for R-12 or R-134A They give a brief description of where they mount, and what years they fit. Happy Hunting

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-18-2003, 08:54 PM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	If you want the compressor on the passengers side then you will probably want to go with the short water pump setup as I am not aware of any long water pump setups with the compressor on the right. Post a WTB on the parts board and try to get a full set. Piecing a set together is a chore sometimes. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.