TX WTB gauge cluster shell that had clock - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tuckerracing · 03-17-2011, 09:18 PM

WTB gauge cluster shell or complete gauge cluster that had a clock with no broken mounting points.

TIA
Travis Tucker
Posted via Mobile Device

b454rat · 03-17-2011, 10:24 PM

All you need to do is cut a couple holes in the back for the wires to go thru, don't really need a new cluster...Mounting tabs are there already.

tuckerracing · 03-17-2011, 10:36 PM

My blazer is in shop right now getting the floor boards replaced so i cant see my old cluster. So the clock doesnt need the metal clips like the other gauges do to hold it in place?
Posted via Mobile Device

f.monroe · 03-17-2011, 11:38 PM

The clock has a stand alone wiring harness that runs to a constant 12v source. You can make your own harness os use the harness that comes with th clock if you buy just a clock . I would get a later model quartz clock since they work better.
Frank

tuckerracing · 03-18-2011, 12:07 AM

Im looking at another cluster shell that I have and I see what your saying is that the clock just bolts in like the other gauges do. Thanks for the help, I have a good shel that i can use then.
Posted via Mobile Device

03-17-2011, 09:18 PM	#1
tuckerracing Registered User Join Date: Feb 2011 Location: Bullard, Texas Posts: 140	WTB gauge cluster shell that had clock WTB gauge cluster shell or complete gauge cluster that had a clock with no broken mounting points. TIA Travis Tucker Posted via Mobile Device __________________ 77 Blazer 2wd 72 Blazer 2wd 72 C10 Suburban 2wd 71 C10 Suburban 2wd

03-17-2011, 10:24 PM	#2
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	Re: WTB gauge cluster shell that had clock All you need to do is cut a couple holes in the back for the wires to go thru, don't really need a new cluster...Mounting tabs are there already. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

03-17-2011, 10:36 PM	#3
tuckerracing Registered User Join Date: Feb 2011 Location: Bullard, Texas Posts: 140	Re: WTB gauge cluster shell that had clock My blazer is in shop right now getting the floor boards replaced so i cant see my old cluster. So the clock doesnt need the metal clips like the other gauges do to hold it in place? Posted via Mobile Device __________________ 77 Blazer 2wd 72 Blazer 2wd 72 C10 Suburban 2wd 71 C10 Suburban 2wd

03-17-2011, 11:38 PM	#4
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: WTB gauge cluster shell that had clock The clock has a stand alone wiring harness that runs to a constant 12v source. You can make your own harness os use the harness that comes with th clock if you buy just a clock . I would get a later model quartz clock since they work better. Frank __________________ Born and proudly residing in a Red State !

03-18-2011, 12:07 AM	#5
tuckerracing Registered User Join Date: Feb 2011 Location: Bullard, Texas Posts: 140	Re: WTB gauge cluster shell that had clock Im looking at another cluster shell that I have and I see what your saying is that the clock just bolts in like the other gauges do. Thanks for the help, I have a good shel that i can use then. Posted via Mobile Device __________________ 77 Blazer 2wd 72 Blazer 2wd 72 C10 Suburban 2wd 71 C10 Suburban 2wd

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.