Pics of your chassis/frame! Rolling or not! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Puglia10 · 03-21-2011, 05:13 PM

Hey guys, just thought it'd be cool to get a thread going of everyone's painted up chassis and stuff since there are so many nice ones! Whether its just spray painted stock or airbrushed custom, show off what your body hides, lets see whats underneath!

Altec · 03-21-2011, 05:23 PM

Not quite finished, but here is mine. Covered in Hammered finish paint using a brush. Goes on thick, and pretty resistant to impacts.

Only picture I have of the back. Hadn't done inside the rails yet, sorry.

I first wire wheeled the frame, then sealed it using stuff made by Superco Specialty Products called "Convert-A."

SYCOTIK · 03-21-2011, 05:40 PM

Here's mine. Everything powdercoated semi-gloss black.

Posted via Mobile Device
Posted via Mobile Device

Restrorob · 03-21-2011, 05:52 PM

Quote:

Originally Posted by SYCOTIK

Here's mine. Everything powdercoated semi-gloss black.

I'm not post'n mine after that ^^^^^^^ !!!

Altec · 03-21-2011, 06:01 PM

Gotta be proud of your junk! No matter how it looks! I wouldn't trade mine for anything...

broey · 03-21-2011, 07:01 PM

not mine, not even sure if its a member. but this severed ties 81 c-10 frame is pretty awesome!

it really gets into the frame at about 2 mins.

YouTube - The C-10 Build

gchemist · 03-21-2011, 08:31 PM

Taken the day a ZZ4 was installed.

one low c10 · 03-21-2011, 08:38 PM

heres mine done in POR15...sorry they are crappy cell phone pics

baclay9 · 03-21-2011, 08:53 PM

Mine

By claypool782 at 2010-09-23

Restrorob · 03-21-2011, 09:14 PM

Nice !

Glad I have a flat screen monitor, Much easier to flip on their side !

95 S_Trucker · 03-21-2011, 09:30 PM

78 4wd:

flamingbig10 · 03-21-2011, 09:34 PM

my4by2 · 03-21-2011, 09:42 PM

Here's a shot of mine before & after powdercoat. Crew cab LWB.

JasonBird · 03-21-2011, 09:53 PM

my 67....got the 73 front crossmember in and working on getting a 79 rear end under it!

Rbcustoms · 03-22-2011, 01:01 AM

Heres mine 77 LB chassis powder coated candy blue

Altec · 03-22-2011, 01:48 AM

That is down right sexy.

Puglia10 · 03-22-2011, 08:33 AM

some really cool stuff here! keep it comin guys! any and all

dieseltech · 03-22-2011, 02:24 PM

Quote:

Originally Posted by SYCOTIK

Here's mine. Everything powdercoated semi-gloss black.

Posted via Mobile Device
Posted via Mobile Device

im picturing a 73 body on that chassis

*87 chevy silverado* · 03-22-2011, 02:33 PM

Quote:

Originally Posted by broey

not mine, not even sure if its a member. but this severed ties 81 c-10 frame is pretty awesome!

it really gets into the frame at about 2 mins.
YouTube - The C-10 Build

ive seen this one a couple times i wish i could see the final product

*87 chevy silverado* · 03-22-2011, 02:39 PM

gear box did this
Name: rjs 391.jpg
Views: 1043
Size: 68.8 KB

durring

Name: rjs 401.jpg
Views: 1029
Size: 68.0 KB

welding it up
Name: rjs 416.jpg
Views: 997
Size: 41.4 KB

all done

Name: rjs 419.jpg
Views: 1018
Size: 68.2 KB

the new frame im converting over to a 2wd old pic have done some work to it
Name: 112710_16471.jpg
Views: 1025
Size: 38.5 KB

SYCOTIK · 03-22-2011, 05:00 PM

Quote:

Originally Posted by dieseltech

im picturing a 73 body on that chassis

Picture an '87 on it lol
Posted via Mobile Device

Muney · 03-22-2011, 07:45 PM

here is mine, painted with POR-15. I am thinking about having it all sandblasted again and powdercoated because the POR-15 is peeling off!!

dieseltech · 03-22-2011, 10:55 PM

Quote:

Originally Posted by SYCOTIK

Picture an '87 on it lol
Posted via Mobile Device

That would work too!!!!

03-21-2011, 05:13 PM	#1
Puglia10 Registered User Join Date: Apr 2009 Location: Boston MA Posts: 389	Pics of your chassis/frame! Rolling or not! Hey guys, just thought it'd be cool to get a thread going of everyone's painted up chassis and stuff since there are so many nice ones! Whether its just spray painted stock or airbrushed custom, show off what your body hides, lets see whats underneath! __________________ 1979 c30 3+3 dually 1946 GMC

03-21-2011, 05:23 PM	#2
Altec Getcha Pull Join Date: Nov 2010 Location: MD Posts: 691	Re: Pics of your chassis/frame! Rolling or not! Not quite finished, but here is mine. Covered in Hammered finish paint using a brush. Goes on thick, and pretty resistant to impacts. Only picture I have of the back. Hadn't done inside the rails yet, sorry. I first wire wheeled the frame, then sealed it using stuff made by Superco Specialty Products called "Convert-A." __________________ '81 K10 454/SM465 '86 S10 Blazer '95 H-D Softail '96 Integra

03-21-2011, 05:40 PM	#3
SYCOTIK Registered User Join Date: Feb 2011 Location: Vacaville, CA Posts: 34	Re: Pics of your chassis/frame! Rolling or not! Here's mine. Everything powdercoated semi-gloss black. Posted via Mobile Device Posted via Mobile Device

03-21-2011, 06:01 PM	#5
Altec Getcha Pull Join Date: Nov 2010 Location: MD Posts: 691	Re: Pics of your chassis/frame! Rolling or not! Gotta be proud of your junk! No matter how it looks! I wouldn't trade mine for anything... __________________ '81 K10 454/SM465 '86 S10 Blazer '95 H-D Softail '96 Integra

03-21-2011, 08:31 PM	#7
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: Pics of your chassis/frame! Rolling or not! Taken the day a ZZ4 was installed. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

03-21-2011, 08:38 PM	#8
one low c10 Registered User Join Date: Sep 2010 Location: Toledo, Ohio Posts: 106	Re: Pics of your chassis/frame! Rolling or not! heres mine done in POR15...sorry they are crappy cell phone pics Attached Images Last edited by one low c10; 03-21-2011 at 10:33 PM.

03-21-2011, 08:53 PM	#9
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: Pics of your chassis/frame! Rolling or not! Mine By claypool782 at 2010-09-23 By claypool782 at 2010-09-23 By claypool782 at 2010-09-23

03-21-2011, 09:14 PM	#10
Restrorob The One And Only !!! Join Date: Jan 2007 Location: Hole in the woods Florida Posts: 4,567	Re: Pics of your chassis/frame! Rolling or not! Nice ! Glad I have a flat screen monitor, Much easier to flip on their side ! __________________ 93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. *"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!*

03-21-2011, 09:30 PM	#11
95 S_Trucker Registered User Join Date: Oct 2009 Location: . Posts: 2,187	Re: Pics of your chassis/frame! Rolling or not! 78 4wd:

03-21-2011, 09:34 PM	#12
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Pics of your chassis/frame! Rolling or not! __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 03-21-2011 at 09:37 PM.

03-21-2011, 09:42 PM	#13
my4by2 Registered User Join Date: Dec 2010 Location: Hot Springs, AR. Posts: 1,215	Re: Pics of your chassis/frame! Rolling or not! Here's a shot of mine before & after powdercoat. Crew cab LWB. Attached Images __________________ 1977 Chevrolet K30 LWB Crew Cab 497HP Mast Motorsports 6.0L LY6 HO engine GM NV4500 5-speed, Centerforce clutch + NP205 D60 + 14-bolt FF w/ Eaton posi + disc brakes Skyjacker 2.5" full spring lift w/ Nitro shocks Custom paint + interior http://67-72chevytrucks.com/vboard/s...d.php?t=435722

03-21-2011, 09:53 PM	#14
JasonBird '67 C-10 LWB Driver Join Date: Dec 2010 Location: Andover, Kansas Posts: 380	Re: Pics of your chassis/frame! Rolling or not! my 67....got the 73 front crossmember in and working on getting a 79 rear end under it! Attached Images __________________ '67 C-10 LWB - My Build Thread '67 C-20 LWB - My Donor/ Parts truck - SOLD! '92 GMC SAFARI VAN - My Parts Go Getter '06 KIA SPORTAGE EX - My Commuter "All of this crap better make a truck!" - my wife Sue. Proud U.S.M.C. Dad!

03-22-2011, 01:01 AM	#15
Rbcustoms Registered User Join Date: Jan 2011 Location: cen-cal Posts: 45	Re: Pics of your chassis/frame! Rolling or not! Heres mine 77 LB chassis powder coated candy blue __________________ It's not what you buy, It's what you build Last edited by Rbcustoms; 03-22-2011 at 01:12 AM.

03-22-2011, 01:48 AM	#16
Altec Getcha Pull Join Date: Nov 2010 Location: MD Posts: 691	Re: Pics of your chassis/frame! Rolling or not! That is down right sexy. __________________ '81 K10 454/SM465 '86 S10 Blazer '95 H-D Softail '96 Integra

03-22-2011, 08:33 AM	#17
Puglia10 Registered User Join Date: Apr 2009 Location: Boston MA Posts: 389	Re: Pics of your chassis/frame! Rolling or not! some really cool stuff here! keep it comin guys! any and all __________________ 1979 c30 3+3 dually 1946 GMC



Register or Log In To remove these advertisements.

03-22-2011, 02:39 PM	#20
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: Pics of your chassis/frame! Rolling or not! gear box did this durring welding it up all done the new frame im converting over to a 2wd old pic have done some work to it Last edited by 87 chevy silverado; 03-22-2011 at 02:41 PM.

03-22-2011, 07:45 PM	#22
Muney Registered User Join Date: Jan 2011 Location: Maryland Posts: 47	Re: Pics of your chassis/frame! Rolling or not! here is mine, painted with POR-15. I am thinking about having it all sandblasted again and powdercoated because the POR-15 is peeling off!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.