What size is the 12 point on the rag joint? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70 Jimmy · 03-21-2003, 01:45 PM

I need to get the old steering rag joint off so I need to buy a socket. What size is it? Thanks

O'l Buck · 03-21-2003, 02:53 PM

I just went out to look at mine, but they are both so covered in grease that I can't see them. Most likely it takes a 7/16. maybe a 1/2.

JimKshortstep4x4 · 03-21-2003, 02:57 PM

It is a 7/16" 12 point.

Jim

70 Jimmy · 03-23-2003, 02:35 PM

Thanks guys, I'll go out and buy one.

adamls · 03-23-2003, 02:58 PM

The cool thing about 12pt bolts is that the socket size is the same as the bolt size, example, if you have a half inch bolt then it takes a half inch socket.

03-21-2003, 01:45 PM	#1
70 Jimmy aka Crusher, Crushergmc Join Date: Mar 2000 Location: Oregon Posts: 1,834	What size is the 12 point on the rag joint? I need to get the old steering rag joint off so I need to buy a socket. What size is it? Thanks __________________ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious"

03-21-2003, 02:53 PM	#2
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	I just went out to look at mine, but they are both so covered in grease that I can't see them. Most likely it takes a 7/16. maybe a 1/2. __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

03-23-2003, 02:35 PM	#4
70 Jimmy aka Crusher, Crushergmc Join Date: Mar 2000 Location: Oregon Posts: 1,834	Thanks guys, I'll go out and buy one. __________________ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious"

03-23-2003, 02:58 PM	#5
adamls Gotta Startem Early Join Date: Oct 2001 Location: Amarillo, TX, USA Posts: 364	The cool thing about 12pt bolts is that the socket size is the same as the bolt size, example, if you have a half inch bolt then it takes a half inch socket. __________________ 67 SWB In Progress, one piece at a time, maybe 3 years I will be finished

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-21-2003, 02:57 PM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	It is a 7/16" 12 point. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.