SD WTB - 292 power steering brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71swb4x4 · 03-27-2011, 04:30 PM

I need a set of 292 power steering brackets and pulleys that will work on my 1967 292.
I bought some from a board member but they turned out to be the newer style 292 brackets (my fault not his). I need brackets that will work on my 67. Let me know what you have and how much they are.
I will need photos.

Unfortunately my truck has no brakes or power steering now, as we converted it over to hydroboost brakes.

71swb4x4 · 03-28-2011, 07:49 PM

ttt

pestwagon · 05-16-2012, 08:07 AM

I have the whole P/S engine set up...pump, brackets spacers, pulleys (crank pully and P/S pully for a 67 292 motor) all sandblasted, cleaned up and painted. Sold my truck last month. Kept the P/S. This is for the 1967 non-integrated head and it's rare as hen's teeth. I sold my last setup for $400. I'd like to get that. I have a thread showing the same brackets search my statistics. Steve. 209-617-0796. Not included is the gear box or hoses, just the motor side of things...

pestwagon · 05-16-2012, 08:09 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=416048

That was another set UP i HAD. I sold it for $400. Theses are really rare. The one I have now is 67.

03-27-2011, 04:30 PM	#1
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	WTB - 292 power steering brackets I need a set of 292 power steering brackets and pulleys that will work on my 1967 292. I bought some from a board member but they turned out to be the newer style 292 brackets (my fault not his). I need brackets that will work on my 67. Let me know what you have and how much they are. I will need photos. Unfortunately my truck has no brakes or power steering now, as we converted it over to hydroboost brakes. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. Last edited by 71swb4x4; 03-27-2011 at 04:32 PM.

03-28-2011, 07:49 PM	#2
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: WTB - 292 power steering brackets ttt __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

05-16-2012, 08:07 AM	#3
pestwagon Registered User Join Date: Feb 2010 Location: Los Banos, CA Posts: 390	Re: WTB - 292 power steering brackets I have the whole P/S engine set up...pump, brackets spacers, pulleys (crank pully and P/S pully for a 67 292 motor) all sandblasted, cleaned up and painted. Sold my truck last month. Kept the P/S. This is for the 1967 non-integrated head and it's rare as hen's teeth. I sold my last setup for $400. I'd like to get that. I have a thread showing the same brackets search my statistics. Steve. 209-617-0796. Not included is the gear box or hoses, just the motor side of things...

05-16-2012, 08:09 AM	#4
pestwagon Registered User Join Date: Feb 2010 Location: Los Banos, CA Posts: 390	Re: WTB - 292 power steering brackets http://67-72chevytrucks.com/vboard/s...d.php?t=416048 That was another set UP i HAD. I sold it for $400. Theses are really rare. The one I have now is 67.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.