Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-03-2011, 12:08 PM | #1 |
Registered User
Join Date: Sep 2008
Location: Mobile, Al.
Posts: 687
|
Three arms needed to roll window down.
Well maybe not three but two was a must to pull up on the glass while cranking the window open or close.I've put up with it for a couple of years, I expected to change the regulator when I put new rubber and seals in my doors but just for the heck of it this morning I got out a can of silicone spray lube I had in the shed for some time and I oiled everything I could get to and guess what, the window works now; still needs the seals and rubber but you can work the window up and down one handed. Go figure the easiest fix is usually the best. I hope it'll last, if not I will try a heavier grease.
Last edited by R.L.; 04-03-2011 at 12:09 PM. Reason: spellin |
04-03-2011, 12:32 PM | #2 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Three arms needed to roll window down.
it's a fact moving parts like to b clean lubricated to work properly a fact overlooked by many
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|