Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-04-2011, 09:17 AM | #1 |
Registered User
Join Date: May 2008
Location: California
Posts: 161
|
1972 C-10 - Interior Kick Panels
I'm lookin for a set of kick panels that I could use to put a set of speakers in, anybody have or know where I can get these?
|
04-04-2011, 09:24 AM | #2 |
Gearhead
Join Date: Jan 2008
Location: Colorado
Posts: 1,193
|
Re: 1972 C-10 - Interior Kick Panels
I am pretty sure that LMC sells them, you might also check the vendors on the board, they can usually get just about anything and are great to deal with. Someone else should chime in as well, but a lot of guys also make there own out of wood/fiberglass.
__________________
2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644 |
04-04-2011, 09:50 AM | #3 |
Account Suspended
Join Date: Sep 2010
Location: hingham ma
Posts: 1,721
|
Re: 1972 C-10 - Interior Kick Panels
I used a set from custom autosound,
be prepaired to bend the e brake pedal , i heated mine and bent it (take the rubber foot pad off first) had to adjust the pass side vent vac can. other than that piece of cake.. my speakers where a little to deep and hold the center out some (can't tell) |
04-04-2011, 09:53 AM | #4 |
Account Suspended
Join Date: Sep 2010
Location: hingham ma
Posts: 1,721
|
Re: 1972 C-10 - Interior Kick Panels
|
04-04-2011, 09:57 AM | #5 |
Registered User
Join Date: Oct 2007
Location: Valley Springs, Ca
Posts: 857
|
Re: 1972 C-10 - Interior Kick Panels
__________________
My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004 |
04-04-2011, 10:17 AM | #6 |
Account Suspended
Join Date: Sep 2010
Location: hingham ma
Posts: 1,721
|
Re: 1972 C-10 - Interior Kick Panels
nice
|
04-04-2011, 10:25 AM | #7 | |
Registered User
Join Date: May 2008
Location: California
Posts: 161
|
Re: 1972 C-10 - Interior Kick Panels
Yea, like those!!
Quote:
|
|
04-04-2011, 10:47 AM | #8 |
Registered User
Join Date: May 2008
Location: California
Posts: 161
|
Re: 1972 C-10 - Interior Kick Panels
|
04-04-2011, 01:20 PM | #9 |
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: 1972 C-10 - Interior Kick Panels
I have a set in my truck they sound ok at best but they do the trick it is not like if I could hear it thru the sound of the motor...
I think mine are from LMC
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
04-04-2011, 01:37 PM | #10 | |
Account Suspended
Join Date: Sep 2010
Location: hingham ma
Posts: 1,721
|
Re: 1972 C-10 - Interior Kick Panels
Quote:
and a matching one on the cab pillar I ran mine from the speaker to the oval hole at botton of door trim(behind it) and then to hole near front of door then to hole in the hinge area, I try'd going straight up the inner door but the inner brace is in your way, it can be done but its a pita, and the holes for the way I ran it are already there.. used a piece of coathanger to fish it through the door and pillar Last edited by stich626; 04-04-2011 at 01:38 PM. |
|
04-04-2011, 01:43 PM | #11 |
Member
Join Date: Jan 2011
Location: Stuart, Florida
Posts: 467
|
Re: 1972 C-10 - Interior Kick Panels
I have similiar ones, they can also be painted to match your interior. Mine sound ok, they came with low qualitly speakers in them, but i've since replaced them with a set of pioneer speakers. Also had to do some cutting to make them fit, but not a big deal to do.
|
04-04-2011, 01:46 PM | #12 |
Account Suspended
Join Date: Sep 2010
Location: hingham ma
Posts: 1,721
|
Re: 1972 C-10 - Interior Kick Panels
looking at this paint pad fail of a door
if you look at the two dots and the line between them.. this is where I ran the wire to get passed the inner brace. then into the hole on the door and then the pillar hope this helps note these holes are behind the door trim.. you'll have to remove the window crank,arm rest and trim panel Last edited by stich626; 04-04-2011 at 01:48 PM. |
04-04-2011, 02:06 PM | #13 | |
Registered User
Join Date: May 2008
Location: California
Posts: 161
|
Re: 1972 C-10 - Interior Kick Panels
Quote:
|
|
04-04-2011, 02:13 PM | #14 |
Account Suspended
Join Date: Sep 2010
Location: hingham ma
Posts: 1,721
|
Re: 1972 C-10 - Interior Kick Panels
mine had holes under the upper hinge a little above the interior light switch in the pillar and the hole in the door lined up.. no idea if it was there stock or added sometime in the 40+ years on the road.
|
04-04-2011, 02:14 PM | #15 |
Account Suspended
Join Date: Sep 2010
Location: hingham ma
Posts: 1,721
|
Re: 1972 C-10 - Interior Kick Panels
i'll take pic's later it's pouring here now..
and post them.. on the door to pillar |
04-04-2011, 02:16 PM | #16 |
Registered User
Join Date: May 2008
Location: California
Posts: 161
|
Re: 1972 C-10 - Interior Kick Panels
thanks and yes........
|
04-05-2011, 12:33 PM | #17 |
Account Suspended
Join Date: Sep 2010
Location: hingham ma
Posts: 1,721
|
Re: 1972 C-10 - Interior Kick Panels
didn't forget still raining hard,,
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|