AZ Blazer 1\2 top molds - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Jurassic-1** · 05-08-2011, 01:46 PM

These are 2 blazer 1\2 top molds. These were used in the 70s. They are 1969- 1972 blazer and a 1973-1975 top mold. They are in great shape and were well made. They are built to withstand time and production molding. They have full instructions to fab all internal attaching points,measurements and assembly. each has the inner and outer 1\2 to replicate blazer tops.Molds are sold as a set, no splitting. They weigh approx 250 to 300 pounds each. They are priced at $1500.00 or best offer for both.

S.C. blazer · 05-09-2011, 05:11 PM

are molds still for sale?

**Jurassic-1** · 05-09-2011, 09:18 PM

Quote:

Originally Posted by S.C. blazer

are molds still for sale?

They are.

DownLowHoe · 05-15-2011, 07:00 PM

Wow, I have never seen a 73-75 half top. Wish I had the loot for these things. Any pics of the 73-75 tops by chance. Good luck with the sale, these will be a money maker for someone.

VA72C10 · 05-18-2011, 02:56 PM

might try posting these on the vendor section to see if one of our vendors is interested in these to start a production run of them...

OARNGESI · 05-19-2011, 06:21 PM

I know you dont want to but if you split im really interested in the 1st gen set up

BOHICA · 05-19-2011, 08:31 PM

Wish I had the money and you were closer. I'd be on this like a duck on a june bug.

pmpski_1 · 05-20-2011, 12:52 AM

Wow.

**Jurassic-1** · 05-21-2011, 01:17 PM

Quote:

Originally Posted by DownLowHoe

Wow, I have never seen a 73-75 half top. Wish I had the loot for these things. Any pics of the 73-75 tops by chance. Good luck with the sale, these will be a money maker for someone.

I will stop by to get the manuals for them. There are pictures of customer vehicles .

american revolution · 06-14-2011, 04:44 PM

Have you ever taken the molds to a fiberglass place to find out cost of making the top?

**Jurassic-1** · 06-14-2011, 06:22 PM

Quote:

Originally Posted by american revolution

Have you ever taken the molds to a fiberglass place to find out cost of making the top?

I did not. But I called and gave them a description of them and they seemed to think it could be done for between $200.00 - $250.00 but that was a guess. I could bring them to them for a more accurate quote. I have all the manuals to make all the plates and the metal bulkhead along with pictures and advertising lititure. I just do not have enough time.

JimmyFloyd · 06-15-2011, 11:32 AM

Wow. These are a great find. Wish I had the cash to pick them up. Might have to start calling around to see if I can find a place that does this to see what kind of cost I'd be looking at for these...

**Jurassic-1** · 06-15-2011, 08:01 PM

Quote:

Originally Posted by JimmyFloyd

Wow. These are a great find. Wish I had the cash to pick them up. Might have to start calling around to see if I can find a place that does this to see what kind of cost I'd be looking at for these...

I think there is a market if you could get someone at a production fiberglass shop to mass produce them reasonably.

american revolution · 06-17-2011, 01:40 AM

looking for someonein my area that can make...how much do you think would shipping be to northern california?

**Jurassic-1** · 06-17-2011, 02:18 PM

Quote:

Originally Posted by american revolution

looking for someonein my area that can make...how much do you think would shipping be to northern california?

Where do you live? I would think They could be shipped for about $300.00 - $500.00.
They weigh about 175-225 pounds each. If you shopped around you probubly could find a truck in need for a load going that way. or another thought I go to Pamona several times a year and could get them that far.

S.C. blazer · 06-18-2011, 09:54 PM

Can u email your phone number to gbolton27@yahoo.com
Posted via Mobile Device

**Jurassic-1** · 06-19-2011, 11:10 AM

Quote:

Originally Posted by S.C. blazer

Can u email your phone number to gbolton27@yahoo.com
Posted via Mobile Device

e-mail sent

Musclerodz · 06-20-2011, 02:52 AM

do you have the bulkhead molds? I am interested

**jaros44sr** · 06-20-2011, 07:17 AM

Quote:

Originally Posted by Musclerodz

do you have the bulkhead molds? I am interested

the bulkhead is bent sheetmetal...need pics?

**Jurassic-1** · 06-20-2011, 11:29 AM

Quote:

Originally Posted by Musclerodz

do you have the bulkhead molds? I am interested

The bulkhead is made of steel. I believe the pattern is in the packet. I will get the packet from my friend and look at it again. It has been a while since I saw the details.

**Jurassic-1** · 06-20-2011, 11:30 AM

Here are pics of top molds and ads.

**jaros44sr** · 06-20-2011, 01:49 PM

Quote:

Originally Posted by Jurassic-1

Jaro, Whats going on? How are yo doing on you're Blazer?

life is good, how about you? Still plugging away at the Jimmy, working on the motor at present. If you get time, stop over to my build....

budnikguy · 06-28-2011, 05:21 PM

Interested, sent PM.

**Jurassic-1** · 06-28-2011, 06:49 PM

Quote:

Originally Posted by budnikguy

Interested, sent PM.

Here are more pics. There are a few more in thes thread a few frames back.

**Jurassic-1** · 06-28-2011, 06:52 PM

Quote:

Originally Posted by S.C. blazer

Can u email your phone number to gbolton27@yahoo.com
Posted via Mobile Device

I tried to call but get a message that says mailbox not set up. give me a call if you can. Thanks

05-08-2011, 01:46 PM	#1
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Blazer 1\2 top molds These are 2 blazer 1\2 top molds. These were used in the 70s. They are 1969- 1972 blazer and a 1973-1975 top mold. They are in great shape and were well made. They are built to withstand time and production molding. They have full instructions to fab all internal attaching points,measurements and assembly. each has the inner and outer 1\2 to replicate blazer tops.Molds are sold as a set, no splitting. They weigh approx 250 to 300 pounds each. They are priced at $1500.00 or best offer for both. Attached Images Last edited by Jurassic-1; 07-16-2011 at 03:46 PM. Reason: ad change

05-09-2011, 05:11 PM	#2
S.C. blazer Registered User Join Date: Apr 2011 Location: anderson sc Posts: 3	Re: Blazer 1\2 top molds are molds still for sale?

05-15-2011, 07:00 PM	#4
DownLowHoe Registered User Join Date: May 2005 Location: Orlando Posts: 205	Re: Blazer 1\2 top molds Wow, I have never seen a 73-75 half top. Wish I had the loot for these things. Any pics of the 73-75 tops by chance. Good luck with the sale, these will be a money maker for someone.

05-18-2011, 02:56 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Blazer 1\2 top molds might try posting these on the vendor section to see if one of our vendors is interested in these to start a production run of them... __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-19-2011, 06:21 PM	#6
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Blazer 1\2 top molds I know you dont want to but if you split im really interested in the 1st gen set up __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

05-19-2011, 08:31 PM	#7
BOHICA Registered User Join Date: Apr 2006 Location: Cookeville, TN Posts: 274	Re: Blazer 1\2 top molds Wish I had the money and you were closer. I'd be on this like a duck on a june bug.

05-20-2011, 12:52 AM	#8
pmpski_1 Registered User Join Date: Jan 2006 Location: Seattle WA Posts: 505	Re: Blazer 1\2 top molds Wow. __________________ Curry in a Hurry: SB rebuild for my 71 C20

06-14-2011, 04:44 PM	#10
american revolution Registered User Join Date: Apr 2007 Location: san francisco Posts: 446	Re: Blazer 1\2 top molds Have you ever taken the molds to a fiberglass place to find out cost of making the top?

06-15-2011, 11:32 AM	#12
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Blazer 1\2 top molds Wow. These are a great find. Wish I had the cash to pick them up. Might have to start calling around to see if I can find a place that does this to see what kind of cost I'd be looking at for these... __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

06-17-2011, 01:40 AM	#14
american revolution Registered User Join Date: Apr 2007 Location: san francisco Posts: 446	Re: Blazer 1\2 top molds looking for someonein my area that can make...how much do you think would shipping be to northern california?

06-18-2011, 09:54 PM	#16
S.C. blazer Registered User Join Date: Apr 2011 Location: anderson sc Posts: 3	Re: Blazer 1\2 top molds Can u email your phone number to gbolton27@yahoo.com Posted via Mobile Device

06-20-2011, 02:52 AM	#18
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,364	Re: Blazer 1\2 top molds do you have the bulkhead molds? I am interested __________________ Mike Redpath

06-20-2011, 11:30 AM	#21
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: Blazer 1\2 top molds Here are pics of top molds and ads. Attached Images Last edited by Jurassic-1; 06-28-2011 at 06:54 PM. Reason: add photos

06-28-2011, 05:21 PM	#23
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Blazer 1\2 top molds Interested, sent PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.