Bellhousing ID please... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 05-20-2011, 09:25 PM

I picked up a one piece aluminum bellhousing today and was wondering if anyone can ID it for me? The number is 3858403.
Thanks, Eric

**LockDoc** · 05-20-2011, 09:36 PM

Eric,

The Chevy "403" is an aluminum 153 tooth bellhousing with a 4 5/8" center hole.This makes it compatible with all GM 4 speeds (Muncie,Saginaw,T-10), except the 1963 small bearing retainer transmissions.
According to the 1967-75 Chevrolet Parts Catalog this is the only Clutch housing listed for the 302 cubic inch engine (69 Z-28 Camaro). Yet the I.D. number is 3840383.

LockDoc

**too much stuff** · 05-20-2011, 09:41 PM

So it looks like a desirable one anyhow. I don't do much with manual transmissions, more of an auto guy. Do you know if there is a good market for these? Or are they very common? Thanks for the help leon.

**LockDoc** · 05-20-2011, 09:49 PM

-
I think they are pretty common. Should be worth $65-$100 I would think....

LockDoc

05-20-2011, 09:25 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Bellhousing ID please... I picked up a one piece aluminum bellhousing today and was wondering if anyone can ID it for me? The number is 3858403. Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-20-2011, 09:36 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,639	Re: Bellhousing ID please... Eric, The Chevy "403" is an aluminum 153 tooth bellhousing with a 4 5/8" center hole.This makes it compatible with all GM 4 speeds (Muncie,Saginaw,T-10), except the 1963 small bearing retainer transmissions. According to the 1967-75 Chevrolet Parts Catalog this is the only Clutch housing listed for the 302 cubic inch engine (69 Z-28 Camaro). Yet the I.D. number is 3840383. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

05-20-2011, 09:41 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: Bellhousing ID please... So it looks like a desirable one anyhow. I don't do much with manual transmissions, more of an auto guy. Do you know if there is a good market for these? Or are they very common? Thanks for the help leon. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-20-2011, 09:49 PM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,639	Re: Bellhousing ID please... - I think they are pretty common. Should be worth $65-$100 I would think.... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.